V8 Angel new version has been released.

For V8 angle
Freesat S805
Freesat S905X

Moderators: admin, Rambo, Freesat Team

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

V8 Angel new version has been released.

Postby nzl229 » Tue Sep 27, 2016 6:39 am

V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

zcache
Posts: 83
Joined: Fri Aug 12, 2016 2:42 am

Re: V8 Angel new version has been released.

Postby zcache » Tue Sep 27, 2016 8:02 am

nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.


This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B
V8 Pro /Timing record improperly work.
V8 Golden /Always unknown CA Card.
V8 Angel /Please support S2 LCN.

kulaan71
Posts: 3
Joined: Tue Sep 27, 2016 3:21 pm

Re: V8 Angel new version has been released.

Postby kulaan71 » Tue Sep 27, 2016 3:24 pm

Thank you...i am used angel v8.

eumesmo
Posts: 84
Joined: Mon Aug 29, 2016 10:29 am

Re: V8 Angel new version has been released.

Postby eumesmo » Tue Sep 27, 2016 4:38 pm

New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

Newtman
Posts: 7
Joined: Thu Aug 11, 2016 5:15 pm

Re: V8 Angel new version has been released.

Postby Newtman » Wed Sep 28, 2016 12:15 am

Now DVB-C is dead for me, before it detect signal but doens't work.
Really bad support.

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Sep 28, 2016 1:43 am

zcache wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.


This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B


The new fireware is too big to make a CRC check.
You can use this firmware to upgrade your Angel box, it will show you a message if you meet a error.

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Sep 28, 2016 1:54 am

eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.

the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.

zcache
Posts: 83
Joined: Fri Aug 12, 2016 2:42 am

Re: V8 Angel new version has been released.

Postby zcache » Wed Sep 28, 2016 2:59 am

nzl229 wrote:
zcache wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.


This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B


The new fireware is too big to make a CRC check.
You can use this firmware to upgrade your Angel box, it will show you a message if you meet a error.

That OK! but if you can do that, it very cool. However customer can check the image with test archived files by winrar feature also.

eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.

My box also same problem, and one more thing channel changing too slow. and I need little bit suggestion.
- Can you make the second press OK button to close channel list? (after press OK to call channel list)
- Can you make it support with V8 Golden/Pro softcam.key?

Everything look nice, I like this version.
V8 Pro /Timing record improperly work.
V8 Golden /Always unknown CA Card.
V8 Angel /Please support S2 LCN.

eumesmo
Posts: 84
Joined: Mon Aug 29, 2016 10:29 am

Re: V8 Angel new version has been released.

Postby eumesmo » Wed Sep 28, 2016 8:29 am

After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble

V8 Angel still cannot be used as primary box.
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Sep 28, 2016 12:04 pm

eumesmo wrote:After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble
V8 Angel still cannot be used as primary box.


The way to use and debug more function of OSCAM
1. Enter to Setting page--- Network, get the IP address of STB.
440A37E003284A8AAE2ABC82F8DA49F9.jpg
440A37E003284A8AAE2ABC82F8DA49F9.jpg (17.6 KiB) Viewed 2775 times


2. Open the computer browser, input the IP address and add “:8081” as below
For example: http://192.168.1.26:8081
15CDA4A79C6A48F2B37BA9585655CFFB.jpg
15CDA4A79C6A48F2B37BA9585655CFFB.jpg (33.85 KiB) Viewed 2775 times

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Sep 28, 2016 12:08 pm

nzl229 wrote:
eumesmo wrote:After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble
V8 Angel still cannot be used as primary box.


The way to use and debug more function of OSCAM
1. Enter to Setting page--- Network, get the IP address of STB.
440A37E003284A8AAE2ABC82F8DA49F9.jpg

2. Open the computer browser, input the IP address and add “:8081” as below
For example: http://192.168.1.26:8081
15CDA4A79C6A48F2B37BA9585655CFFB.jpg

I have forgotten to tell you that you must insert wire cable on box, keep the box and computer in the same network, use the same Router.
Insert wire cable on box, keep the box and computer in the same network, use the same Router.

kulaan71
Posts: 3
Joined: Tue Sep 27, 2016 3:21 pm

Re: V8 Angel new version has been released.

Postby kulaan71 » Wed Sep 28, 2016 3:27 pm

How to downgrade version 1.0.4..latest version pop up scramble...use cccam.

eumesmo
Posts: 84
Joined: Mon Aug 29, 2016 10:29 am

Re: V8 Angel new version has been released.

Postby eumesmo » Thu Sep 29, 2016 2:24 pm

nzl229 wrote:
eumesmo wrote:After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble
V8 Angel still cannot be used as primary box.


The way to use and debug more function of OSCAM
1. Enter to Setting page--- Network, get the IP address of STB.
440A37E003284A8AAE2ABC82F8DA49F9.jpg

2. Open the computer browser, input the IP address and add “:8081” as below
For example: http://192.168.1.26:8081
15CDA4A79C6A48F2B37BA9585655CFFB.jpg


yes, i know how to access oscam, changes i have made on config files seem to work better, still have some timeouts, i will try using ethernet to see if is better then wifi, router is only 5 meters away.
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

eumesmo
Posts: 84
Joined: Mon Aug 29, 2016 10:29 am

Re: V8 Angel new version has been released.

Postby eumesmo » Thu Sep 29, 2016 4:11 pm

nzl229 wrote:
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.

the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.


Can you send patch?

what do you mean "the version still not support recording a scrambled channel"? is the v8 angel will never support scrambled channel or this version of firmware doesn't support? and in the future it will be able to record.
V8 Pro/V8 Golden/V8 Angel/ eyeTV with eytvcamd

lakshitha
Posts: 5
Joined: Mon Oct 10, 2016 4:42 am

Re: V8 Angel new version has been released.

Postby lakshitha » Mon Oct 10, 2016 4:53 am

plz guys email me the v8 angle user guide lakshithamalawaraarachchi@gmail.com. I tried but cant download onedrive

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Mon Oct 10, 2016 7:42 am

eumesmo wrote:
nzl229 wrote:
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.

the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.


Can you send patch?

what do you mean "the version still not support recording a scrambled channel"? is the v8 angel will never support scrambled channel or this version of firmware doesn't support? and in the future it will be able to record.

This version doesn't support recording a scrambled channel.
We will develop a version that support recoding a scrambled channel.

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Sat Oct 22, 2016 8:38 am

eumesmo wrote:
nzl229 wrote:
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.

the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.


Can you send patch?

what do you mean "the version still not support recording a scrambled channel"? is the v8 angel will never support scrambled channel or this version of firmware doesn't support? and in the future it will be able to record.

The next fireware will support recording scramble channels, please wait.
Thanks!

yohane
Posts: 17
Joined: Mon Oct 17, 2016 5:22 pm

Re: V8 Angel new version has been released.

Postby yohane » Sun Oct 23, 2016 11:36 am

are we looking forward to a firmware that will support, autoroll biss,powervu,tandberg,excrypt,cccam .really this v8 angel must be superior to all the previous v7&v8 buy having all their features and its own.it must outclass previous decoder by any means.

kulaan71
Posts: 3
Joined: Tue Sep 27, 2016 3:21 pm

Re: V8 Angel new version has been released.

Postby kulaan71 » Mon Oct 24, 2016 11:09 pm

Button remote control not function (red circle)
1.sat
2. DVB-C
3. DVB-S
4. DVB-T
5. mouse logo
6, audio

Image

Avendano1976
Posts: 11
Joined: Tue Nov 01, 2016 12:13 am

Re: V8 Angel new version has been released.

Postby Avendano1976 » Tue Nov 01, 2016 11:06 am

nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

I think that in the next improvements you could include:


1.Poder make list of channels joint of terrestrial and satellite.


2. possibility of create a list of channels manually, without the need of using no editador.


3.que the mouse is more functional, since applications are required to use it and is not possible at the moment.


Thank you for your work

Avendano1976
Posts: 11
Joined: Tue Nov 01, 2016 12:13 am

Re: V8 Angel new version has been released.

Postby Avendano1976 » Wed Nov 02, 2016 6:51 am

nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Nov 02, 2016 12:51 pm

Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!

you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!

User avatar
nzl229
Posts: 44
Joined: Mon Aug 08, 2016 2:54 am

Re: V8 Angel new version has been released.

Postby nzl229 » Wed Nov 02, 2016 12:52 pm

nzl229 wrote:
Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!

you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!

the patch is upgraded as an usual fireware upgrade

Avendano1976
Posts: 11
Joined: Tue Nov 01, 2016 12:13 am

Re: V8 Angel new version has been released.

Postby Avendano1976 » Wed Nov 02, 2016 3:45 pm

nzl229 wrote:
nzl229 wrote:
Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!

you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!

the patch is upgraded as an usual fireware upgrade

como pueeeeeeedo pegar eso en el deco.......gacias por la ayuda amigo

tek
Posts: 15
Joined: Mon Oct 31, 2016 3:17 pm

Re: V8 Angel new version has been released.

Postby tek » Wed Nov 02, 2016 4:10 pm

the patch is upgraded as an usual fireware upgrade....NO WAY !!!!!!!
Just upgraded nothing difference USUAL still not fix.!!!!
What is being dane????


Return to “Android box”

Who is online

Users browsing this forum: No registered users and 1 guest