Page 1 of 2

V8 Angel new version has been released.

Posted: Tue Sep 27, 2016 6:39 am
by nzl229
V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.

Re: V8 Angel new version has been released.

Posted: Tue Sep 27, 2016 8:02 am
by zcache
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B

Re: V8 Angel new version has been released.

Posted: Tue Sep 27, 2016 3:24 pm
by kulaan71
Thank you...i am used angel v8.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 12:15 am
by Newtman
Now DVB-C is dead for me, before it detect signal but doens't work.
Really bad support.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 1:43 am
by nzl229
zcache wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B
The new fireware is too big to make a CRC check.
You can use this firmware to upgrade your Angel box, it will show you a message if you meet a error.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 1:54 am
by nzl229
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.
the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 2:59 am
by zcache
nzl229 wrote:
zcache wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
This is file hashes. It very useful for compare the correction of file was downloaded.
nzl229 please check is it correct?

CRC32: EDA4322A
MD5: 77280E325FFC3CC7C148E0FC25FBEB44
SHA-1: C7DFA9949EE908323A67D1380746C58782BF440B
The new fireware is too big to make a CRC check.
You can use this firmware to upgrade your Angel box, it will show you a message if you meet a error.
That OK! but if you can do that, it very cool. However customer can check the image with test archived files by winrar feature also.
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.
My box also same problem, and one more thing channel changing too slow. and I need little bit suggestion.
- Can you make the second press OK button to close channel list? (after press OK to call channel list)
- Can you make it support with V8 Golden/Pro softcam.key?

Everything look nice, I like this version.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 12:04 pm
by nzl229
eumesmo wrote:After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble
V8 Angel still cannot be used as primary box.
The way to use and debug more function of OSCAM
1. Enter to Setting page--- Network, get the IP address of STB.
440A37E003284A8AAE2ABC82F8DA49F9.jpg
440A37E003284A8AAE2ABC82F8DA49F9.jpg (17.6 KiB) Viewed 15159 times
2. Open the computer browser, input the IP address and add “:8081” as below
For example: http://192.168.1.26:8081
15CDA4A79C6A48F2B37BA9585655CFFB.jpg
15CDA4A79C6A48F2B37BA9585655CFFB.jpg (33.85 KiB) Viewed 15159 times

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 12:08 pm
by nzl229
nzl229 wrote:
eumesmo wrote:After some more use i found a few problems:
- On HD channels sound sometimes stops, and image slows down.
- Importing CCCAM accounts from USB only imports first line, but the message shows the correct number of lines on file.
- EPG is not working properly, but it seams to be date related, as oscam files backup where a day after the real date, will try to check that later.

I will change some configurations on oscam files and try to debug the connection to see what is causing some channels to be very slow on unscramble, it takes 15 to 20 seconds to unscramble
V8 Angel still cannot be used as primary box.
The way to use and debug more function of OSCAM
1. Enter to Setting page--- Network, get the IP address of STB.
440A37E003284A8AAE2ABC82F8DA49F9.jpg

2. Open the computer browser, input the IP address and add “:8081” as below
For example: http://192.168.1.26:8081
15CDA4A79C6A48F2B37BA9585655CFFB.jpg
I have forgotten to tell you that you must insert wire cable on box, keep the box and computer in the same network, use the same Router.
Insert wire cable on box, keep the box and computer in the same network, use the same Router.

Re: V8 Angel new version has been released.

Posted: Wed Sep 28, 2016 3:27 pm
by kulaan71
How to downgrade version 1.0.4..latest version pop up scramble...use cccam.

Re: V8 Angel new version has been released.

Posted: Mon Oct 10, 2016 4:53 am
by lakshitha
plz guys email me the v8 angle user guide lakshithamalawaraarachchi@gmail.com. I tried but cant download onedrive

Re: V8 Angel new version has been released.

Posted: Mon Oct 10, 2016 7:42 am
by nzl229
eumesmo wrote:
nzl229 wrote:
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.
the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.
Can you send patch?

what do you mean "the version still not support recording a scrambled channel"? is the v8 angel will never support scrambled channel or this version of firmware doesn't support? and in the future it will be able to record.
This version doesn't support recording a scrambled channel.
We will develop a version that support recoding a scrambled channel.

Re: V8 Angel new version has been released.

Posted: Sat Oct 22, 2016 8:38 am
by nzl229
eumesmo wrote:
nzl229 wrote:
eumesmo wrote:New version seems to fix channel scan and CCCAM, but as another issues, i've only tested it for 5 minutes, but detected some problems,
channel changing on scrambled channels takes too long to unscramble, sometimes scrambled message stays on screen after channel unscramble.
still no record on scrambled channels, and no SAT2Ip like functionality.
the version still not support recording a scrambled channel.
and the problem that sometimes scrambled message stays on screen after channel unscramble, this bug we can send a patch for you.
Can you send patch?

what do you mean "the version still not support recording a scrambled channel"? is the v8 angel will never support scrambled channel or this version of firmware doesn't support? and in the future it will be able to record.
The next fireware will support recording scramble channels, please wait.
Thanks!

Re: V8 Angel new version has been released.

Posted: Sun Oct 23, 2016 11:36 am
by yohane
are we looking forward to a firmware that will support, autoroll biss,powervu,tandberg,excrypt,cccam .really this v8 angel must be superior to all the previous v7&v8 buy having all their features and its own.it must outclass previous decoder by any means.

Re: V8 Angel new version has been released.

Posted: Mon Oct 24, 2016 11:09 pm
by kulaan71
Button remote control not function (red circle)
1.sat
2. DVB-C
3. DVB-S
4. DVB-T
5. mouse logo
6, audio

Image

Re: V8 Angel new version has been released.

Posted: Tue Nov 01, 2016 11:06 am
by Avendano1976
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
I think that in the next improvements you could include:


1.Poder make list of channels joint of terrestrial and satellite.


2. possibility of create a list of channels manually, without the need of using no editador.


3.que the mouse is more functional, since applications are required to use it and is not possible at the moment.


Thank you for your work

Re: V8 Angel new version has been released.

Posted: Wed Nov 02, 2016 6:51 am
by Avendano1976
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!

Re: V8 Angel new version has been released.

Posted: Wed Nov 02, 2016 12:51 pm
by nzl229
Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!
you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!

Re: V8 Angel new version has been released.

Posted: Wed Nov 02, 2016 12:52 pm
by nzl229
nzl229 wrote:
Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!
you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!
the patch is upgraded as an usual fireware upgrade

Re: V8 Angel new version has been released.

Posted: Wed Nov 02, 2016 3:45 pm
by Avendano1976
nzl229 wrote:
nzl229 wrote:
Avendano1976 wrote:
nzl229 wrote:V8 Angel new version has been released.
You can download the new version here:
https://1drv.ms/u/s!AovuYC0ZTzMjgSPr8DCi4BH1bTa1

Thank you for your support.
Esta versión es aún peor que la anterior, tarda mucho en cambiar de canal y después el mensaje de "canal codificado" no desaparece de la pantalla, en la opción de dvbt2 aparece sin señal cuando está al 95%!!! En fin un desastre de firmware.... MUY MALA COMPRA!! DECEPCIONADO POR EL PRODUCTO!!

This version is even worse than the previous one, takes too long to change the channel and then the message "encrypted channel" does not disappear from the screen in the DVB-T2 option appears no signal when 95% !!! Finally firmware disaster BUY .... VERY BAD !! DISAPPOINTED BY THE PRODUCT !!
you can download the patch and upgrade to close message "encrypted channel".
download here:
https://pan.baidu.com/s/1hsPVF3A

thanks!
the patch is upgraded as an usual fireware upgrade
como pueeeeeeedo pegar eso en el deco.......gacias por la ayuda amigo

Re: V8 Angel new version has been released.

Posted: Wed Nov 02, 2016 4:10 pm
by tek
the patch is upgraded as an usual fireware upgrade....NO WAY !!!!!!!
Just upgraded nothing difference USUAL still not fix.!!!!
What is being dane????

Re: V8 Angel new version has been released.

Posted: Fri Nov 04, 2016 8:31 pm
by rinflo71
When does the new software appear?!
I hope the problems are getting solved.. :mrgreen:

Re: V8 Angel new version has been released.

Posted: Mon Nov 14, 2016 1:12 pm
by Avendano1976
rinflo71 wrote:When does the new software appear?!
I hope the problems are getting solved.. :mrgreen:
the angel v8 has so many problems that you need three lives to solve them and if they don't have to fix them NASA! It is the worst decoder that's currently on the market.

I already it sold by that is very malo.si your it as purchased you commiserate... :( :? :arrow:

Re: V8 Angel new version has been released.

Posted: Thu Nov 17, 2016 2:58 am
by zcache
Now it's released with version of 201601109.

after few days testing, I can say it going nice.
- No encryption message stick on screen.
- feel little bit fast channel change also switching between S2 and T2.
- Can record scrambled channel.
- No KODI embedded, but it's not a big problem just reinstall it back.

but some point still not yet solve.
- S2 still can't arrange channel by LCN.
- Audio channel always on left not on stereo.
- No any message for scrambled channel.
- EPG not correct, always showing on Sunday.
- often media box launcher crashes message.
- less information on info bar.
audio type, screen resolution, descramble type CA or BISS or ...

==Edit more information==

Re: V8 Angel new version has been released.

Posted: Thu Nov 17, 2016 7:54 am
by jovani
Were can you download the new software 20161109, please ? I see nothing...