LNBF C BAND

for the power, AV cable,HDMI cable....

Moderators: admin, Rambo, Freesat Team

serrano
Posts: 13
Joined: Thu Sep 08, 2016 1:08 am

LNBF C BAND

Postby serrano » Mon Dec 18, 2017 7:37 pm

I need buy 1 new lnbf c band any help for good place to buy online ,thank you

Jim
Posts: 72
Joined: Sat Oct 28, 2017 2:24 pm

Re: LNBF C BAND

Postby Jim » Mon Dec 18, 2017 7:40 pm

What country at you in?

STRETCH
Posts: 119
Joined: Mon Jan 09, 2017 2:31 pm

Re: LNBF C BAND

Postby STRETCH » Mon Dec 18, 2017 8:11 pm

You could look at a Titanium Satellite C1W-PLL C-BAND LNB

DEN

serrano
Posts: 13
Joined: Thu Sep 08, 2016 1:08 am

Re: LNBF C BAND

Postby serrano » Tue Dec 19, 2017 1:26 am

Jim wrote:What country at you in?

in canada

Jim
Posts: 72
Joined: Sat Oct 28, 2017 2:24 pm

Re: LNBF C BAND

Postby Jim » Tue Dec 19, 2017 1:58 am

The reason why I ask what country you live in that a lot of the U.S. suppliers will only ship in the U.S. States and offer "Free Shipping". EBay would be a good source to look as far as specifications and price! As far as LNBF's for C-Band a lot of folks I have seen in reviews like the Titanium brand?

serrano
Posts: 13
Joined: Thu Sep 08, 2016 1:08 am

Re: LNBF C BAND

Postby serrano » Wed Dec 20, 2017 11:59 am

thank you Jim,i did a google for this brand [titaniun ] yes i think is good i fand a dealer in Michigam USA

frogtong
Posts: 35
Joined: Sun Aug 13, 2017 3:35 pm

Re: LNBF C BAND

Postby frogtong » Mon Jan 01, 2018 10:43 pm

yes i got 1titaniun from amazon but never get it work so i give up use the old lnbf still good signal

Jim
Posts: 72
Joined: Sat Oct 28, 2017 2:24 pm

Re: LNBF C BAND

Postby Jim » Tue Jan 02, 2018 12:27 am

What model of titanium did you get? http://www.titaniumsatellite.com/products

Marantz
Posts: 51
Joined: Thu Dec 28, 2017 5:36 pm

Re: LNBF C BAND

Postby Marantz » Tue Jan 02, 2018 1:59 am

Hi

if in Canada , Dr Sat has some cheapies ,at least he did in the summer ,abt 30 to 40 $Canadian each.
These are the feedhorn and the lnb conbined or LNBFs
I bought the duels C-KU ,one had the switching built in , on 22 khz for ku and off for C ,with hi /low voltage for polarity changing

L O freqs were 5150 for C band and 10750 ku

other one had separate outputs for each band and you used a two port dsq switch to choose bands C or KU

I tested both ,they were good for the money all things considered but not as good as a single band lnb dedicated for C and a separate feed horn.

They worked well enough i kept one it in service so i can do both C and KU and kept the other for a spare ,there are a lot of FTA channels on KU so its worth it

Choose carefully if you have a motor/actuator on the same coax /feedline out to the dish.

I use a separate arm /actuator and a stand alone controller on my big dish /bud ,to avoid conflicts with the hardware

Jim
Posts: 72
Joined: Sat Oct 28, 2017 2:24 pm

Re: LNBF C BAND

Postby Jim » Tue Jan 02, 2018 2:15 am

On my 10' dish I use a Chapparal Bullseye 11 C/Ku orthomode feedhorn with Norsat C and Ku lnbs. On my smaller Ku I use only Invacom QPH-031. great performers on C-band and Ku feeds.

Marantz
Posts: 51
Joined: Thu Dec 28, 2017 5:36 pm

Re: LNBF C BAND

Postby Marantz » Tue Jan 02, 2018 2:00 pm

I still have a few old bullseyes in the attic ,and spare motors ,you know the ones with the 5 volt polar motor ,along with a couple of drake esr 324s and their 70 mhz downconvertors ,65 degree LNAs too,they were big bucks in the old days .junked the stand alone GI 2100e abt 10 yrs ago

I cant believe what you get for your money these days ,compared to what you used to have to pay

Jim
Posts: 72
Joined: Sat Oct 28, 2017 2:24 pm

Re: LNBF C BAND

Postby Jim » Tue Jan 02, 2018 2:37 pm

Things sure have changed since I got into the hobby in 85' and yup I have a closet and shed packed with old electronics and receivers, dishes :lol:

User avatar
ead
Posts: 22
Joined: Tue Feb 13, 2018 2:56 pm

Re: LNBF C BAND

Postby ead » Tue Feb 20, 2018 10:47 pm

I use the Titanium C1W-PLL both in Arizona and Minnesota and it works great.
10 foot mesh dish, 24 inch Von Weise actuator, ASC1 actuator positioner, V8 super

Channel Master
Posts: 24
Joined: Wed Apr 19, 2017 12:53 pm

Re: LNBF C BAND

Postby Channel Master » Thu Feb 22, 2018 10:27 pm

I am still using old Uniden stand alone control boxes to move my c band dishes.

oscar2873
Posts: 10
Joined: Mon Feb 06, 2017 5:56 am

Re: LNBF C BAND

Postby oscar2873 » Wed Apr 04, 2018 1:06 am

Hi, titanium C1W-PLL and C2W-PLL give me the best result for me, I have aproximately 20 different lnbf c band and in the future I post a results for a comparisson.

Regards


Return to “Accessories”

Who is online

Users browsing this forum: No registered users and 1 guest