FREESAT V7 HD TRANSPONDERS PROBLEM
Moderators: admin, GTMedia Team
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
FREESAT V7 HD TRANSPONDERS PROBLEM
Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
what you can do IFjosephjul40 wrote:Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
other decoder works fine and
factory rest does not do the trick is
Completely FLASH the unit to the latest firmware. So it will complete start from zero
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
Marsat wrote:what you can do IFjosephjul40 wrote:Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
other decoder works fine and
factory rest does not do the trick is
Completely FLASH the unit to the latest firmware. So it will complete start from zero
Can you please help me with the step to step on how to complete flash the unit?
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
As I said on your other post, from the unit that works go to the menu for USB Dump and set the top line to user data ssd and save your channel list to USB.
Then in the factory reset unit do a USB Upgrade and set the top line to User data and select the file lower down for the user data ssd file that you saved from the other unit.
Caution. The V7HD wil save this user data ssd file over top of any file already on the USB.
You can rename these files and still select and use them.
EG; freesatRemaned_v7HD_db_ssdata.bin
Owen
Then in the factory reset unit do a USB Upgrade and set the top line to User data and select the file lower down for the user data ssd file that you saved from the other unit.
Caution. The V7HD wil save this user data ssd file over top of any file already on the USB.
You can rename these files and still select and use them.
EG; freesatRemaned_v7HD_db_ssdata.bin
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
Ok Mr Admn.
I get u, but all the step u give right now i have already done and nothing change. It get all the data from other box including the chanel and tps but no signal to the tps
I get u, but all the step u give right now i have already done and nothing change. It get all the data from other box including the chanel and tps but no signal to the tps
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
1) Grab a USB Flash Drive and Format it on FAT32. That will erase any hidden filesjosephjul40 wrote:Marsat wrote:what you can do IFjosephjul40 wrote:Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
other decoder works fine and
factory rest does not do the trick is
Completely FLASH the unit to the latest firmware. So it will complete start from zero
Can you please help me with the step to step on how to complete flash the unit?
2) Download latest firma\ware on the download section
3) rename that file to flash.bin
4) Turn your decoder OFF
5) Insert the flash diver on the USB port
6) Keep you rfinger on the MENU button and start pressing continusly at the same time tunr your decoder ON
7) Keep pressing and releasing the Menu button until UPG shows on the decoder LED display and on your TV the Flash Menu
8) Proceed to flash the unit
9) When done will reboot
10) your decoder will be factory set completely cleaned at the version you doownloaded
NOW
dont do anything until you try this
A) Create a TEST satellite
Set your LNB etc ect
add a those transponders that you have issues
Aim the dish to that Satellite
DO a FULL scan Not blind dos FULL so it will scan those TP only
Check the result, if it works you made it
If not, you said you have another decoders place those in the same outlet you have issues not in another part of the house, you may have a short in the line or polarity problems
REMEMBER GUYS
1) When Handling USB Driver or any USB adaptor POWER OFF THE DECODER
2) When plugging IN or OUT the coaxial cable POWER OFF THE DECODER
2) When a lighting storm is close to your property POWER OFF THE DECODER, remover ethernet wire and disconnect the coaxial cable
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
Trying all those ways but nothing changed, am so confused, may be there is a short or polarity problem
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
josephjul40 wrote:Trying all those ways but nothing changed, am so confused, may be there is a short or polarity problem
- Attachments
-
- Unit flash
- IMG_20180825_101049.jpg (4.12 MiB) Viewed 3856 times
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
Marsat wrote:1) Grab a USB Flash Drive and Format it on FAT32. That will erase any hidden filesjosephjul40 wrote:Marsat wrote:what you can do IFjosephjul40 wrote:Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
other decoder works fine and
factory rest does not do the trick is
Completely FLASH the unit to the latest firmware. So it will complete start from zero
Can you please help me with the step to step on how to complete flash the unit?
2) Download latest firma\ware on the download section
3) rename that file to flash.bin
4) Turn your decoder OFF
5) Insert the flash diver on the USB port
6) Keep you rfinger on the MENU button and start pressing continusly at the same time tunr your decoder ON
7) Keep pressing and releasing the Menu button until UPG shows on the decoder LED display and on your TV the Flash Menu
8) Proceed to flash the unit
9) When done will reboot
10) your decoder will be factory set completely cleaned at the version you doownloaded
NOW
dont do anything until you try this
A) Create a TEST satellite
Set your LNB etc ect
add a those transponders that you have issues
Aim the dish to that Satellite
DO a FULL scan Not blind dos FULL so it will scan those TP only
Check the result, if it works you made it
If not, you said you have another decoders place those in the same outlet you have issues not in another part of the house, you may have a short in the line or polarity problems
REMEMBER GUYS
1) When Handling USB Driver or any USB adaptor POWER OFF THE DECODER
2) When plugging IN or OUT the coaxial cable POWER OFF THE DECODER
2) When a lighting storm is close to your property POWER OFF THE DECODER, remover ethernet wire and disconnect the coaxial cable
How can i repair a line short or polarity problem?
-
- Posts: 14
- Joined: Tue Jan 03, 2017 6:41 am
- Location: Tanzania
Re: FREESAT V7 HD TRANSPONDERS PROBLEM
All ways but nothing chaged as u see in the picture below. I try to take the signal from other decoder but nothing chanel come.Marsat wrote:1) Grab a USB Flash Drive and Format it on FAT32. That will erase any hidden filesjosephjul40 wrote:Marsat wrote:what you can do IFjosephjul40 wrote:Hello member.
I have a freesat v7 hd, it works fine at the begining. So it comes one day i factory reset it, since that day it fails to nab some transponders eg @75e KU it can get the chanels from 11631 V 1500 only. But fails to scan chanel of tp 11665 V 45000 and 11596 V 30000. It fails even to get the signal of those tps while if i change another v7 hd it get them easily. I try to get it several times with the latest software but no changes. I need your help my fellow members here. In some satellites it fails to get signal even one tp nothing
other decoder works fine and
factory rest does not do the trick is
Completely FLASH the unit to the latest firmware. So it will complete start from zero
Can you please help me with the step to step on how to complete flash the unit?
2) Download latest firma\ware on the download section
3) rename that file to flash.bin
4) Turn your decoder OFF
5) Insert the flash diver on the USB port
6) Keep you rfinger on the MENU button and start pressing continusly at the same time tunr your decoder ON
7) Keep pressing and releasing the Menu button until UPG shows on the decoder LED display and on your TV the Flash Menu
8) Proceed to flash the unit
9) When done will reboot
10) your decoder will be factory set completely cleaned at the version you doownloaded
NOW
dont do anything until you try this
A) Create a TEST satellite
Set your LNB etc ect
add a those transponders that you have issues
Aim the dish to that Satellite
DO a FULL scan Not blind dos FULL so it will scan those TP only
Check the result, if it works you made it
If not, you said you have another decoders place those in the same outlet you have issues not in another part of the house, you may have a short in the line or polarity problems
REMEMBER GUYS
1) When Handling USB Driver or any USB adaptor POWER OFF THE DECODER
2) When plugging IN or OUT the coaxial cable POWER OFF THE DECODER
2) When a lighting storm is close to your property POWER OFF THE DECODER, remover ethernet wire and disconnect the coaxial cable
How to repair a line short or a polarity problem please.
Thank in advance