Hi freesat coders
Can add an option for input frequency by user in next upgrade? for example we need input 10500 freq for use GLA lnbs
Regards
add freq by user (LNB)
Moderators: admin, GTMedia Team
Re: add freq by user (LNB)
Yes, I want need any LO frequency manual input for My V7HD & V8super.
Because my C band and Ku band LNB LO. are not 5150 and 10600. there are 5149 and 10602.
Also I have 12.500 LNB is not settable.
So fix correct frequency.
Thanks in advance.
Because my C band and Ku band LNB LO. are not 5150 and 10600. there are 5149 and 10602.
Also I have 12.500 LNB is not settable.
So fix correct frequency.
Thanks in advance.
Re: add freq by user (LNB)
I have found that many LNB's will move off frequency as they get old.
I have some here that are 8MHz off.
Also the frequency that the STB reports can be a little off due to the way STB's calculate frequency against their internal clock.
There is no problem if you are using frequencies form the Satellite lists off the net, eg 4180 and your STB blind scans in 4181.
When you get to 4MHZ or more you can have issues.
12.5 for an LNB low frequency is unusual. The normal top frequency of the Ku band is 12.7.
Owen
I have some here that are 8MHz off.
Also the frequency that the STB reports can be a little off due to the way STB's calculate frequency against their internal clock.
There is no problem if you are using frequencies form the Satellite lists off the net, eg 4180 and your STB blind scans in 4181.
When you get to 4MHZ or more you can have issues.
12.5 for an LNB low frequency is unusual. The normal top frequency of the Ku band is 12.7.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: add freq by user (LNB)
Hi, Owen.
Thank you for your quick reply.
Your answer is very helpful for me.
Freesat model, Biss key input have to use frequency so If each C-Band LNB frequency is incorrect, taht use multi C-band antenna have problem.
User satellite list, I rewritten LO from 5150 to 5149 with FreeSat tool and loaded it to V8 Super,
However, The result was changed to 3620. The change did not succeed.
Thank you for your quick reply.
Your answer is very helpful for me.
Freesat model, Biss key input have to use frequency so If each C-Band LNB frequency is incorrect, taht use multi C-band antenna have problem.
User satellite list, I rewritten LO from 5150 to 5149 with FreeSat tool and loaded it to V8 Super,
However, The result was changed to 3620. The change did not succeed.