Hello all,
Before you make a recovery process or anything else that connecting your box with rs232 cable. I suggest you to read the manual carefully and clearly specially in page4. After that let go on...
Freesat RS232 Tool for V7 and V8(09092016) Question
Moderators: admin, GTMedia Team
Freesat RS232 Tool for V7 and V8(09092016) Question
V8 Golden /Tested with v.643 20/12/17 properly recognized my irdeto CA card.
Re: Freesat RS232 Tool for V7 and V8(09092016)
Upgarde fail!....how to solve? please help!
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Freesat RS232 Tool for V7 and V8(09092016)
please tell me, if someone know what this problem after transfer firmware finished but show error.
Re: Freesat RS232 Tool for V7 and V8(09092016)
It seems the RS232 cable wasn't stable or the PC COM port was opened by other tool before start this tool.
please try :
1) disable /enable the COM port by PC control panel
2) check the com port setting
3) some USB2RS232 don't support Full-duplex feature.
the normal is about following :
Please reset the STB! ----> Plug out power cable then insert it.
BOOTROM ...
UPG...
DDR Calibration Completed
start send upgclient
Start to check serial...
Start to configure user limit...
Prepare to download...
Start downloading data...
TRANSFER: SEQ ERROR, RETRY ... ---> don't care it.
-----------Time Stamp[15:52:41]------------
-----------Time Stamp[15:57:41]------------
End downloading
Verify burning flash...
Start burning flash, DONOT POWOFF!
please try :
1) disable /enable the COM port by PC control panel
2) check the com port setting
3) some USB2RS232 don't support Full-duplex feature.
the normal is about following :
Please reset the STB! ----> Plug out power cable then insert it.
BOOTROM ...
UPG...
DDR Calibration Completed
start send upgclient
Start to check serial...
Start to configure user limit...
Prepare to download...
Start downloading data...
TRANSFER: SEQ ERROR, RETRY ... ---> don't care it.
-----------Time Stamp[15:52:41]------------
-----------Time Stamp[15:57:41]------------
End downloading
Verify burning flash...
Start burning flash, DONOT POWOFF!
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: Freesat RS232 Tool for V7 and V8(09092016)
Thanks , bigcar for your information of tactics flash ROM .