Change to the Motor control sequence.

Talking about new market news, idea for life

Moderators: admin, GTMedia Team

Post Reply
Larry
Posts: 58
Joined: Fri Nov 18, 2016 3:45 pm
Location: Atlanta Georgia

Change to the Motor control sequence.

Post by Larry »

Please consider removing some of the extra motor control sequences.
1. Do not continue to re-issue the dish position command more than once or twice. I frequently have to "bump" my actuator a step or two on weak signals.
When you continue to force the DISEC controller back to the preset it fights my attempts to find or peak a weak transponder.

2. When a timer recording finishes leave the receiver on the recorded channel. You have made it much more difficult to do a daily unattended recording. If the dish has to move, the timer does not always start and the recording will not be made. Leaving the receiver on the same transponder will have it ready for the next day. I can always program a view timer if I want the dish somewhere else after the recording is finished.

Both of these changes should involve removing code since these are "Features ???" that have been added with firmware updates.

Post Reply

Return to “Others”