V8 Super & V8 Golden North American Satellite list

Freesat V8 Combo /V8 Golden/V8 Super/V8 Pro firmware and channel list.

Moderators: admin, Rambo, Freesat Team

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Wed Sep 21, 2016 2:45 pm

Here is a V8 Super & V8 Golden satellite list for North America.

By toomanyreceivers

This list may not work if you are using an older firmware before V347.
It will work on the newer firmware for the V8 Super.
It lists satellites from 139° W to 30° W. Total of 60 Satellites are listed in this file.
You will need to make changes to your DiSEqC settings Port 1, Port 2 settings.

There are no channels in this list.
Since a blind scan will pull in the channels there was no sense to put them in here.

Some satellites only have 1 dummy transponder but others have several transponders in the receiver that are all active.
Since there are changes every time you turn around this just makes it easier for those in North America.
C & KU satellites are separated to keep things more simple.
This should make it easier for those in North America since the V8 Super does not come with these satellites listed in the receiver.
Update this via your flash drive.

Longitude settings have been set properly for North America by sending this list to the V8 Super and setting them then downloading the list back onto a flash drive. So this will save users an hour or two of time consuming work.

I hope this make things easier for some people in creating a satellite list in North America.

V8 Super_db09212016.zip
(4.43 KiB) Downloaded 1527 times


By toomanyreceivers
Last edited by toomanyreceivers on Fri Sep 30, 2016 10:58 pm, edited 2 times in total.

User avatar
cpr43
网站管理员
Posts: 418
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Super North American Satellite list

Postby cpr43 » Fri Sep 23, 2016 2:01 pm

Thanks for sharing!!

SatEze
Posts: 39
Joined: Thu Aug 11, 2016 4:02 pm

Re: V8 Super North American Satellite list

Postby SatEze » Fri Sep 23, 2016 4:52 pm

Excellent Job! :D

dhj
Posts: 25
Joined: Mon Sep 19, 2016 7:57 pm
Location: central PA

Re: V8 Super North American Satellite list

Postby dhj » Sun Sep 25, 2016 2:13 am

Does this same list work for V8 Golden? Just started learning how to use it. Thanks

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super North American Satellite list

Postby toomanyreceivers » Sun Sep 25, 2016 12:19 pm

dhj wrote:Does this same list work for V8 Golden? Just started learning how to use it. Thanks


Don't have the golden receiver, so I have no idea if it will or not.
Try it and see. The worse it will do a box will come up saying not compatible so no harm done.
It if does work post back here so everyone can know.

User avatar
cpr43
网站管理员
Posts: 418
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Super North American Satellite list

Postby cpr43 » Sun Sep 25, 2016 3:11 pm

It is mentioned in this Super release #5 to be able to use Golden DB , so I assume it should work backward.

19/08/2016
--V8_Super.bin
change list:
Notice: Please backup the channel list then update the box by allcode mode.
1) Modify inforbar information.
2) add menu : main menu/system/Other setting/Key action
up/down/page up/ page down key action setting
You can select the up key to add or reduce the channel index.
3) RTM channel no sound problem.
4) can dump the auto calculated powervu key to softcam.key
5) support Golden channel list updated directly, auto delete the cable or T2 channels.
6) some biss channels seems FTA channels can be opened by biss key now.
7) export the powervu key generated by auto run feature to softcam.key,
so those powervu channels can be opened quickly after updating allcode then import the softcam.key.

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super North American Satellite list

Postby toomanyreceivers » Mon Sep 26, 2016 12:57 pm

cpr43 wrote:It is mentioned in this Super release #5 to be able to use Golden DB , so I assume it should work backward.



It may have been mentioned on the last firmware release it may work but until someone uses it in a Golden and posts back that it does indeed work one can not say for certain.

As I said earlier "the worse that will happen is a box will appear on tv screen when trying to load it saying the file is not compatible".

Anyone with a golden receiver please try using the file to see for sure if it will work in V8 Golden also.

User avatar
cpr43
网站管理员
Posts: 418
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Super North American Satellite list

Postby cpr43 » Mon Sep 26, 2016 1:06 pm

It is not mentioned in the last firmware. Its in the previous month 8/19 release. So, I'm encouraging anyone with a Golden to do the test and feedback. Thanks for your inputs anyway.

Feralkiwi
网站管理员
Posts: 1402
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Super North American Satellite list

Postby Feralkiwi » Mon Sep 26, 2016 9:17 pm

toomanyreceivers wrote:Anyone with a golden receiver please try using the file to see for sure if it will work in V8 Golden also.


DONE YES

Yes it did load into my V8 Golden, running the latest software.

I will check later if it loads into the V7HD and V8 Pro/combo.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Super and Angle (Sample). Freesat V7HDs and Combo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out on this forum.

User avatar
cpr43
网站管理员
Posts: 418
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Super North American Satellite list

Postby cpr43 » Mon Sep 26, 2016 9:44 pm

Thanks Owen, Great. There is. DB can be share !!

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super North American Satellite list

Postby toomanyreceivers » Mon Sep 26, 2016 10:07 pm

Good to know it works in the V8 Golden receiver.
Too bad I can not change the title of the thread now to say, "V8 Super & V8 Golden North American Satellite List"
:mrgreen: :mrgreen: :mrgreen:

Feralkiwi
网站管理员
Posts: 1402
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

V8 Super & V8 Golden North American Satellite List

Postby Feralkiwi » Mon Sep 26, 2016 10:15 pm

toomanyreceivers wrote:Good to know it works in the V8 Golden receiver.
Too bad I can not change the title of the thread now to say, "V8 Super & V8 Golden North American Satellite List"
:mrgreen: :mrgreen: :mrgreen:


Done

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Super and Angle (Sample). Freesat V7HDs and Combo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out on this forum.

mitigator
Posts: 27
Joined: Wed Sep 28, 2016 10:44 am

Re: V8 Super & V8 Golden North American Satellite list

Postby mitigator » Tue Oct 04, 2016 9:56 am

How do you load North American Satellite List from DBEditor_V2.2 onto the V8 Super, what is step by step procedure?

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Tue Oct 04, 2016 11:52 am

mitigator wrote:How do you load North American Satellite List from DBEditor_V2.2 onto the V8 Super, what is step by step procedure?


The editor program does not load the list into the receiver.

You load the North American List to a usb flash drive and place flash dirve in the receiver, and then upgrade in tools menu to load to your V8 Super.
Press Menu, select tools, Select USB upgrade, then upgrade mode select "user db" and the receiver will see the file on flash drive.
then select start to upgrade.


If your asking how the editor program sees the list when you open the editor program and select the list you must then select "V8" so the list loads properly. The editor program defaults to "V7" so one must be sure to select the proper setting.

shapon
Posts: 4
Joined: Tue Sep 06, 2016 10:47 pm

Re: V8 Super & V8 super problem

Postby shapon » Tue Oct 04, 2016 11:58 am

hi . when i bought this box and setup everything is then i upload my cccam code in to the box its worked then but recently i upgrade new frimwere and its stop working also i factory reset the box and re setup all the seating but still not work.i can see the cs protocol and cccam menu its say Ecm ready i dont no what dose its means?if ok then why not cant see my channels?

Feralkiwi
网站管理员
Posts: 1402
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Super & V8 Golden North American Satellite list

Postby Feralkiwi » Tue Oct 04, 2016 8:23 pm

Many people are having this problem with the new software.
You can down grade your software by doing a flash software loading.
Place the software version on a USB stick and rename it "flash.bin"
Power on the unit while pressing the "Menu" button on the remote and the software will load.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Super and Angle (Sample). Freesat V7HDs and Combo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out on this forum.

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Thu Oct 27, 2016 10:32 pm

Just a "Bump Up" for the North American Sat list for the V8 Super & the V8 Golden receiver for those just getting their receivers this list will save you hours of labor.

dhj
Posts: 25
Joined: Mon Sep 19, 2016 7:57 pm
Location: central PA

Re: V8 Super & V8 Golden North American Satellite list

Postby dhj » Sat Oct 29, 2016 3:03 am

Thanks for the N A list. I has saved me lots of work as I'm still learning how to use this box. The list works fine with old software as I have had no luck downloading newer versions. Allcode did load the list but not new software, even tried flash.bin method. I was not trying the latest with reported bugs. Dave

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Sat Oct 29, 2016 11:59 am

dhj wrote:Thanks for the N A list. I has saved me lots of work as I'm still learning how to use this box. The list works fine with old software as I have had no luck downloading newer versions. Allcode did load the list but not new software, even tried flash.bin method. I was not trying the latest with reported bugs. Dave


Glad the list has helped you out.
You may want to check to see which firmware is already loaded in your receiver.
If you just bought the receiver it may already have the new firmware in it.
Check in your menu section for that information.
The link for the firmware for the V8 Super is here:
http://freesat.cn/forum/viewtopic.php?f=40&t=10&sid=3b27562569041bbab6edb24eeb3816d3

Have fun with your new receiver.

keagans96
Posts: 11
Joined: Wed Dec 21, 2016 10:30 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby keagans96 » Thu Dec 22, 2016 4:04 pm

This should be made a stickie or moved to the download section so people can find it easier.
A must have for North American Satellite list.

Very good sat list!

rockforu2
Posts: 21
Joined: Thu Aug 11, 2016 4:08 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby rockforu2 » Fri Dec 23, 2016 2:17 am

a very good satlist for the v7 boxes also

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Fri Dec 23, 2016 12:36 pm

Thanks, but I would like to know who removed my name from the original post and put "guest" in there ?
Not a nice thing to do to people who post here to remove their name from the posts!

User avatar
toomanyreceivers
Posts: 92
Joined: Thu Aug 11, 2016 12:29 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby toomanyreceivers » Fri Dec 23, 2016 12:45 pm

rockforu2 wrote:a very good satlist for the v7 boxes also


I had also posted a satellite list just for the V7's here:
viewtopic.php?f=32&t=428

At least that one still has my name attached to it on the original post!

User avatar
cpr43
网站管理员
Posts: 418
Joined: Thu Aug 11, 2016 1:41 pm

Re: V8 Super & V8 Golden North American Satellite list

Postby cpr43 » Fri Dec 23, 2016 3:35 pm

toomanyreceivers wrote:Thanks, but I would like to know who removed my name from the original post and put "guest" in there ?
Not a nice thing to do to people who post here to remove their name from the posts!


toomanyreceivers

I was trying to move your post to the sticky download section as recommend by keagans96. After I got inside the edit function I realized there isn't such option in this forum. Maybe when I backup and save it the system erase your name. Sorry, it was my mistake. Havent fund a way to fix it. I will keep looking. Regards

Feralkiwi
网站管理员
Posts: 1402
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V8 Super North American Satellite list

Postby Feralkiwi » Fri Dec 23, 2016 8:20 pm

toomanyreceivers wrote:Thanks, but I would like to know who removed my name from the original post and put "guest" in there ?
Not a nice thing to do to people who post here to remove their name from the posts!


Your name may have got removed when I changed the title of the post to include the V8 super and V8 Golden as per your wish.

toomanyreceivers wrote:Good to know it works in the V8 Golden receiver.
Too bad I can not change the title of the thread now to say, "V8 Super & V8 Golden North American Satellite List"
:mrgreen: :mrgreen: :mrgreen:


I created a new topic and moved the existing posts to it to do that change.
That may have been when the forum software has put Guest there. Sorry for that if it was me.
Perhaps cpr43 can fix it.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Super and Angle (Sample). Freesat V7HDs and Combo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out on this forum.


Return to “Freesat V8”

Who is online

Users browsing this forum: No registered users and 4 guests