我的V8UHD原来在Timer Setting里设置录制,是可以定时录制的。
前两天突然就不行了。恢复出厂设置,降级升级都不行。
定时录制报错截图:
按遥控器上的录制按钮又是正常的,就是定时录制不行。
请问工程师们,要怎么解决?谢谢!
V8UHD定时录制问题
Moderator: admin
Re: V8UHD定时录制问题
These GT Media units use time from the satellite.
Some satellites have incorrect time, sometimes GMT or their local position time.
Even some TP/s on a satellite can have incorrect time.
If you set a recording time and then go to a satellite that has incorrect time in the future, the box will think the time for that recording has past and remove the record request.
There is the option in time setting for NOT using satellite time (GMT) but this is less accurate as it uses the box computer clock.
Owen
Some satellites have incorrect time, sometimes GMT or their local position time.
Even some TP/s on a satellite can have incorrect time.
If you set a recording time and then go to a satellite that has incorrect time in the future, the box will think the time for that recording has past and remove the record request.
There is the option in time setting for NOT using satellite time (GMT) but this is less accurate as it uses the box computer clock.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8UHD定时录制问题
Within the Settings you can set the Timer (Manual).
Den
Den
Re: V8UHD定时录制问题
The programming works well in any mode, some configuration will be wrong