v8 nova与GTC何时发布固件?

这个版块专门为讲中文的朋友设立,请所有中文主题和讨论都到这个地方来。
虽然FREESAT的产品没有在国内销售,但也欢迎各位关注Freesat的朋友到这里讨论,交流。
外语版块不允许有中文回复和主题。

Moderators: admin, Rambo

威八超级
Posts: 60
Joined: Thu Aug 11, 2016 7:58 pm
Location: 中国鹰潭

v8 nova与GTC何时发布固件?

Postby 威八超级 » Sat Apr 28, 2018 4:31 am

请问工程师什么时候发布新固件?特别是GTC,节目表不可以左右键翻页,找频道太难找了,又不能自动powervu

User avatar
Feralkiwi
网站管理员
Posts: 2751
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 nova与GTC何时发布固件?

Postby Feralkiwi » Sat Apr 28, 2018 10:29 pm

There have been no updates for the nova yet.

The GTC updates are automatic via the net. When you have the net connected the GTC will check for updates.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Nova, GTC, Super and Angle (Sample). Freesat V7HDs, Combo and V7s. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

zhou_nick
Posts: 4
Joined: Sun Apr 29, 2018 1:19 am

Re: v8 nova与GTC何时发布固件?

Postby zhou_nick » Sun Apr 29, 2018 1:34 am

你好,版主,我的SUPER V8 在设置 1080P 时,不知怎样突然电视就失去画面,只有显示:Mode not Supported . 现在怎么办,画面又看不到,怎样设置回来?急等

User avatar
Feralkiwi
网站管理员
Posts: 2751
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 nova与GTC何时发布固件?

Postby Feralkiwi » Sun Apr 29, 2018 1:56 am

They Added fast key to switch video output mode or format.
we try to support some old TV or some signal mode TV
Press menu key to main menu.(Panel show "----")
press Green key to switch NTSC/PAL, the panel will show "PAL " or "NTSC"
Press Stop key to switch the video format
PAL mode : the panel will show "576I" -- "576P" -- "720P"(50HZ) --"1080I"(50HZ) --"1080P"(50HZ)
NTSC mode : the panel will show "480I" -- "480P" -- "720P"(60HZ) --"1080I"(60HZ) --"1080P"(60HZ)


Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Nova, GTC, Super and Angle (Sample). Freesat V7HDs, Combo and V7s. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

zhou_nick
Posts: 4
Joined: Sun Apr 29, 2018 1:19 am

Re: v8 nova与GTC何时发布固件?

Postby zhou_nick » Sun Apr 29, 2018 2:08 am

Thanks, you save my life. got it

zhou_nick
Posts: 4
Joined: Sun Apr 29, 2018 1:19 am

Re: v8 nova与GTC何时发布固件?

Postby zhou_nick » Sun Apr 29, 2018 7:09 am

请问有没有固件使得频道可以有中文显示的?

User avatar
Feralkiwi
网站管理员
Posts: 2751
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 nova与GTC何时发布固件?

Postby Feralkiwi » Sun Apr 29, 2018 7:41 am

If it is not in the software now, you could ask freesat to include it.

Their email address is on their www.freesat.cc web site.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Nova, GTC, Super and Angle (Sample). Freesat V7HDs, Combo and V7s. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

moreno3x
Posts: 1
Joined: Wed Jun 06, 2018 1:09 pm

Re: v8 nova与GTC何时发布固件?

Postby moreno3x » Wed Jun 06, 2018 1:16 pm

hola buenas tardes tengo un gtmedia v8 nova este modelo tiene tiempo de pausa y grabacion como el freesat v8 super pero yo solo consigo usar la grabacion con el v8 nova le doy al boton de pausa y no funciona tengo que hacer algo en el menu

User avatar
Feralkiwi
网站管理员
Posts: 2751
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 nova与GTC何时发布固件?

Postby Feralkiwi » Wed Jun 06, 2018 10:06 pm

If I remember, there is an option to enable "Time Shift" in the menus.
This enables pause and record if you have a USB stick in the unit.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Nova, GTC, Super and Angle (Sample). Freesat V7HDs, Combo and V7s. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.


Return to “Freesat产品交流”

Who is online

Users browsing this forum: No registered users and 4 guests