Dear masters,...
I need to input my biss key to skybox v8 combo, how to show the menu in the receiver?..many thanks for your help.
Biss Key Question
Moderators: admin, GTMedia Team
Re: Biss key
1-Menu
2-Tools
3-Go in Conditional Access
4-Press 6666 on the remote control, "Key Edit" will show
5-Go in "Key Edit", select "Biss" and press green button on the remote to add biss key data.
You can use this guide:
How to put Softcam Guide
2-Tools
3-Go in Conditional Access
4-Press 6666 on the remote control, "Key Edit" will show
5-Go in "Key Edit", select "Biss" and press green button on the remote to add biss key data.
You can use this guide:
How to put Softcam Guide
Re: Biss key
This forum is for Freesat units.
Try another forum for skybox.
However ny Skybox V8 (not combo) is like this
Go to "Camds Setup" then "CCcam Cient Setup" then "Manage Config Files" then "Constant.cw"
Use the right button to get to the "+" to add a code.
Code settings for BISS are.
Ciad =2600
ProvID =000000
SID= your channel's SID, You can see this by pressing the "Info" button three time while on that channel.
PMT PID=0000
ECM PID=0000
Even Cw= the biss code for your channel
Odd Cw = the same code again.
Good luck
Owen
Try another forum for skybox.
However ny Skybox V8 (not combo) is like this
Go to "Camds Setup" then "CCcam Cient Setup" then "Manage Config Files" then "Constant.cw"
Use the right button to get to the "+" to add a code.
Code settings for BISS are.
Ciad =2600
ProvID =000000
SID= your channel's SID, You can see this by pressing the "Info" button three time while on that channel.
PMT PID=0000
ECM PID=0000
Even Cw= the biss code for your channel
Odd Cw = the same code again.
Good luck
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.