All About Keys

[cpr43]

Hi,
I am new to this community, and my new GTMedia 9 Prime only shows the channel's list name as srv 1, srv2, srv7, and so on, without showing any channel.
I am living in N America.
I purchased this GT9 Prime in the USA from Gtmedia agent, its sat list is from 30.0W to East with a UK location and is not listed from 30.0W to Western sat.
So, I believe it is not useable for us here in this location and I have no choice but just return it to your sale agent if your assistance is unable to help.

Hello

Are you using Ku or C band? using a Ku HHmotor? You can rename or add new sats using your remote control once you are in a satellite with signal and run a blindscan to find channels for you

[Henry Mosavat]

Thank you. After I did what you said, there is no change. The channel list is like srv1, srv2, srv3, ...and so continue to srv 7 on ku 101.0W and some channels came as the no name. The dish is fixed and without a motor.
I believe there is a need for a sat list and softcam file which I did not find in this community. So this V9 prime is useless here.
Thanks.

[cpr43]

Thank you. After I did what you said, there is no change. The channel list is like srv1, srv2, srv3, ...and so continue to srv 7 on ku 101.0W and some channels came as the no name. The dish is fixed and without a motor.
I believe there is a need for a sat list and softcam file which I did not find in this community. So this V9 prime is useless here.
Thanks.

There is no channel list needed for such FTA channels on 101w Ku band. That is the way they scan in. You will need to rename them using your remote control. Also, they are FTA so no need for Softcam. By the way the V9 prime has most of the keys inside the firmware. This is what the V9 Prime was designed for, a FTA satellite box.
101w FTA Channels

1 Movie promo

2 NHK World Japan

3 SBN Domestic

5 CGTN LyngSat Stream

6 Reach TV

7 Taiwan +

https://www.lyngsat.com/SES-1.html

[guille_1983@yahoodotcomdotar]

Por favor me pudieran enviar las llaves PowerVu bis para el 61W Amazonas, Tengo un gtmedia v9 prime. gracias

[cpr43]

Por favor me pudieran enviar las llaves PowerVu bis para el 61W Amazonas, Tengo un gtmedia v9 prime. gracias

Que canales Powervu o Biss? No hay llaves para 61w. Tienes que comprar servidor privado

[sibaa.mt]

Hello, I bought a new GT Media V8 mars UHD receiver, but I don't know how to input biss key, can anyone help me?

[cpr43]

Hello, I bought a new GT Media V8 mars UHD receiver, but I don't know how to input biss key, can anyone help me?

Hello
Press the Page PG(-) down a screen will pop up. There is access via the Menu/Installation/ 6666 or finally adding them to your softcam.key file.

[danilovelardo]

Can have copy of powervukey 180e or 113e A F N I have x8 I export key to my usb but no key save in keysx8 but x8 open the A F N package thank you so I can open again in v7shd and my nova orange

[Feralkiwi]

Can have copy of powervukey 180e or 113e A F N I have x8 I export key to my usb but no key save in keysx8 but x8 open the A F N package thank you so I can open again in v7shd and my nova orange

If you wait on the 180e A F N it will roll.

The key changes a lot, so you would be needing a new key from someone every day or so.

Owen

[danilovelardo]

Can have copy of powervukey 180e or 113e A F N I have x8 I export key to my usb but no key save in keysx8 but x8 open the A F N package thank you so I can open again in v7shd and my nova orange

If you wait on the 180e A F N it will roll.

The key changes a lot, so you would be needing a new key from someone every day or so.

Owen

Ok thank you bro

[GeovanniR1]

Buenas, alguien tiene el soft cam para Arsat 2 82 W?
Compre recien para mi GT media v7 pro mars.

Tambien le coloco la tarjeta inteligente y no pasa nada
Cuando le doy en CA información no me muestra nada.
Alguien entiende esa parte?

[riguial]

Hola Buenas tardes, hace mucho tiempo que vengo trabajando con los equipos GTmedia, ultimamente el GTmedia V7 s5x no me esta abriendo algunos canales del 40.5 W, no hace el autorroll. Por favor solicito me pasen un softcam para satelites de sudamerica como el 117, 40.5 y 58W. Muchas gracias, a la espera

[cpr43]

Hola Buenas tardes, hace mucho tiempo que vengo trabajando con los equipos GTmedia, ultimamente el GTmedia V7 s5x no me esta abriendo algunos canales del 40.5 W, no hace el autorroll. Por favor solicito me pasen un softcam para satelites de sudamerica como el 117, 40.5 y 58W. Muchas gracias, a la espera

Te envie mensaje

[Lincolnola]

Hello,
Please I need working powervu and biss keys for Eutelsat 7°e on V8UHD.
Secondly, I don't know if the GT media V8 UHD auto rolls??Thanks

[STRETCH]

There are NO Powervu channels at 7e, what Biss channels are you trying to decode, most would be feeds.

Den

[Lincolnola]

There are NO Powervu channels at 7e, what Biss channels are you trying to decode, most would be feeds.

Den


Thanks Den,
If I connect My V8UHD to WiFi, Wil it auto roll some of the BISS scrambled channels on 7e??