USB Burning Tools Failed at 2%

GTC - DVBS/S2/T/T2/ISDB-T/Cable(J83-A/C/B)
GTT - DVBT/T2/Cable

Moderators: admin, Rambo, Freesat Team

arshad
Posts: 17
Joined: Mon Mar 19, 2018 1:52 pm

USB Burning Tools Failed at 2%

Postby arshad » Tue May 15, 2018 6:07 pm

Hi,

I am trying to flash image in my dead freesat GTC using Image burning tool and image file provided on this forum.
Device connects with PC but when I start flashing it failed at 2%.
Error is [0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error

please advice what is the problem.

User avatar
Feralkiwi
网站管理员
Posts: 2513
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: USB Burning Tools Failed at 2%

Postby Feralkiwi » Tue May 15, 2018 9:04 pm

Lining updated that stuff yesterday.
Check this posting.
There may be a new img file.

Owen
Dishes; 5x3m, 2.4m, 2.1m, 1.8m and 4.1m, 10+ ku, 2 movers, USARLS. Skybox F5, F5s, V6, V8. Openbox V8 Combo, Pro, Freesat V8 Golden, Nova, GTC, Super and Angle (Sample). Freesat V7HDs, Combo and V7s. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

arshad
Posts: 17
Joined: Mon Mar 19, 2018 1:52 pm

Re: USB Burning Tools Failed at 2%

Postby arshad » Wed May 16, 2018 3:42 am

Yes, I followed all the steps according to new guidelines, .img file is still old one, I tried many many times, but failed at 2%.
I don't know the problem is with itself with device or corrupt .img file.

User avatar
Lining
网站管理员
Posts: 451
Joined: Thu Aug 11, 2016 11:14 am

Re: USB Burning Tools Failed at 2%

Postby Lining » Wed May 16, 2018 7:19 am

arshad wrote:Yes, I followed all the steps according to new guidelines, .img file is still old one, I tried many many times, but failed at 2%.
I don't know the problem is with itself with device or corrupt .img file.



When you are prompted for 2% during the upgrade process, power up the machine at 12V 1.5A and continue burning.
FREESAT brand change GT MEDlA

arshad
Posts: 17
Joined: Mon Mar 19, 2018 1:52 pm

Re: USB Burning Tools Failed at 2%

Postby arshad » Wed May 16, 2018 7:43 pm

Dear lining, Power adapter is already connected.

As and when I hit start process, it stops quickly at 2% and device immediately disconnect from computer,
I changed USB cable, also tried all usb ports of computer, but no success.
please see the screenshots and error report.
Please ask engineers for support. I sent it back to seller for replacement, but it was returned by Chinese Custom without any reason, so again paid huge shipping charges with no solution. I think its location is now dustbin and I have to buy anthor brand like Mecool etc, but not freesat GTC.
It was my horrible decision when i purchased this one. :( :( :( :(

Another important thing, Lining used image version GTC_v2.0_C20.A6.2.33 dated 23-03-2018 but for download an older version img file GTC_v2.0_C20.A6.2.32 dated 05-03-2018 is available which may be corrupt. Please see the picture No. 3
Attachments
1.jpg
1.jpg (217.04 KiB) Viewed 543 times
2.jpg
2.jpg (164.53 KiB) Viewed 543 times
3.jpg
3.jpg (160.25 KiB) Viewed 543 times

User avatar
IPTVKid
Posts: 97
Joined: Sat Sep 17, 2016 2:31 am
Location: Isla del Espanto

Re: USB Burning Tools Failed at 2%

Postby IPTVKid » Wed May 16, 2018 10:36 pm

arshad wrote:Dear lining, Power adapter is already connected.

As and when I hit start process, it stops quickly at 2% and device immediately disconnect from computer,
I changed USB cable, also tried all usb ports of computer, but no success.
please see the screenshots and error report.
Please ask engineers for support. I sent it back to seller for replacement, but it was returned by Chinese Custom without any reason, so again paid huge shipping charges with no solution. I think its location is now dustbin and I have to buy anthor brand like Mecool etc, but not freesat GTC.
It was my horrible decision when i purchased this one. :( :( :( :(

Another important thing, Lining used image version GTC_v2.0_C20.A6.2.33 dated 23-03-2018 but for download an older version img file GTC_v2.0_C20.A6.2.32 dated 05-03-2018 is available which may be corrupt. Please see the picture No. 3

I am not saying this is your case but once it happened to me with another brand of STB different than Amlogic, it was ALi chip but the problem was the same, I shut down computer because I had to, a few hours when I got home I turned ON computer, did everything and this time it worked, my friend that knows about computers told me that behavior is always present in windows, what causes it? no body knows, the cure is just do a Shut down not restart, shutdown computer wait few minutes turned it ON wait until windows completely boots then try
if it doesn't work you can try USB Burning tool but to format an SD card with the GTC img and make the GTC do all the recovery work itself....................................
V8 NOVA, GTC, GLOBO HD405, FreeSat V8 Super, V7, V7 Max
There is no way to peace, peace is the way......

arshad
Posts: 17
Joined: Mon Mar 19, 2018 1:52 pm

Re: USB Burning Tools Failed at 2%

Postby arshad » Thu May 17, 2018 4:56 am

IPTVKid wrote:
arshad wrote:Dear lining, Power adapter is already connected.

As and when I hit start process, it stops quickly at 2% and device immediately disconnect from computer,
I changed USB cable, also tried all usb ports of computer, but no success.
please see the screenshots and error report.
Please ask engineers for support. I sent it back to seller for replacement, but it was returned by Chinese Custom without any reason, so again paid huge shipping charges with no solution. I think its location is now dustbin and I have to buy anthor brand like Mecool etc, but not freesat GTC.
It was my horrible decision when i purchased this one. :( :( :( :(

Another important thing, Lining used image version GTC_v2.0_C20.A6.2.33 dated 23-03-2018 but for download an older version img file GTC_v2.0_C20.A6.2.32 dated 05-03-2018 is available which may be corrupt. Please see the picture No. 3

I am not saying this is your case but once it happened to me with another brand of STB different than Amlogic, it was ALi chip but the problem was the same, I shut down computer because I had to, a few hours when I got home I turned ON computer, did everything and this time it worked, my friend that knows about computers told me that behavior is always present in windows, what causes it? no body knows, the cure is just do a Shut down not restart, shutdown computer wait few minutes turned it ON wait until windows completely boots then try
if it doesn't work you can try USB Burning tool but to format an SD card with the GTC img and make the GTC do all the recovery work itself....................................


Yes dear, I am also computer guy, I even re-installed windows, tried to make bootable SD card, but in .img file uboot.bin is missing, I think the problem is itself in .img file, because the one used by Lining is different in version, it is 2.33 not 2.32. Still trying, but no sucess yet. hoping form Tips from anyone on this forum ..

arshad
Posts: 17
Joined: Mon Mar 19, 2018 1:52 pm

Re: USB Burning Tools Failed at 2%

Postby arshad » Mon May 21, 2018 8:57 am

GTC engineeres are requested to see the issue I have stated, please.


Return to “Freesat & GTMedia GT”

Who is online

Users browsing this forum: No registered users and 5 guests