powering on
Moderators: admin, nzl229, GTMedia Team
powering on
morning all, I turned on the box this morn, and all it does is green light on soon as you plug her in...anybody know a fix to this
? worked fine yesterday, with version 40....thanx in advance..........gtc model............
? worked fine yesterday, with version 40....thanx in advance..........gtc model............
Re: powering on
Follow instructions here and wait for new coming soon release V2.41lowrider wrote:morning all, I turned on the box this morn, and all it does is green light on soon as you plug her in...anybody know a fix to this
? worked fine yesterday, with version 40....thanx in advance..........gtc model............
https://www.freesat.cc/forum/viewtopic.php?f=55&t=9299
Re: powering on
Thanx for the reply, but no display on tv, so I can't get to the app section........also no display on the box, just the green light........
Re: powering on
try this:lowrider wrote:Thanx for the reply, but no display on tv, so I can't get to the app section........also no display on the box, just the green light........
https://www.freesat.cc/forum/viewtopic. ... ash#p38503
Re: powering on
thanx again, but the links are 404 not found......I believe that would work though...do you have a current link for them?.......thx...
Re: powering on
Download image from here:lowrider wrote:thanx again, but the links are 404 not found......I believe that would work though...do you have a current link for them?.......thx...
https://www.mediafire.com/file/rfre7hvw ... 1.zip/file
and usb burning tool here
- Attachments
-
- USB_Burning_Tool_v2.0.7.1 (1).rar
- (6.12 MiB) Downloaded 34 times
Re: powering on
thank you sir, I'll let you know how it goes........thx again.......
Re: powering on
K, got the tool and unzipped the image file, there were 5 img files and tried them all, but without luck. The program never did say connect to the computer. Green light on the box just illuminated. Did I miss a step in this process? thanx......
Re: powering on
lowrider wrote:K, got the tool and unzipped the image file, there were 5 img files and tried them all, but without luck. The program never did say connect to the computer. Green light on the box just illuminated. Did I miss a step in this process? thanx......
Hi, 1 month ago I had the same issue.
No way to repair with flash. I sent it to the Winsat Europe Office to repair.
Till now I had no answer from their side (because of festive Banned Word). I hope to have it ASAP.
Anyway, if they reply me or I have any news, I will come back and report you guys.
Re: powering on
Open USB Burning Tool
Select "File" item
Select "Import Image"
Look for image (download new one attached)
Wait for image checking message
Click Start
Connect USB cable to box
Software will start installation
"Do not unplug USB cable"
Wait until 100%
Completed
After installation unplug USB cable
Note:
Make sure the USB burning tool was installed including driver
Select "File" item
Select "Import Image"
Look for image (download new one attached)
Wait for image checking message
Click Start
Connect USB cable to box
Software will start installation
"Do not unplug USB cable"
Wait until 100%
Completed
After installation unplug USB cable
Note:
Make sure the USB burning tool was installed including driver
- Attachments
-
- FREESAT GTC Original Recovery.zip
- (8.17 MiB) Downloaded 37 times
Re: powering on
k, I will give that one awhirl..........thx.........
Re: powering on
Wditha bid smile...thank you for all your efforts.....back up and it downloaded 41.....everything good again........well done..........
Re: powering on
@cpr43... what is going to happen with the new V3 boxes.... I recently bought one and no image files are available to do a recovery... I was advised by nzl229 not to put a V2 image on the box, but V3 images are not available....only OTA... at least ask them to put up a V3 factory file to do a recovery if needed one day. I emailed the factory and they said the file was too big to send but I am sure they could post it on this website.... after all this is the 'support site' as they say in their factory website.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)