Welcome Android GTC
Moderators: admin, nzl229, GTMedia Team
Welcome Android GTC
Worm welcome the new box model to Android box section, Freesat GTC. And I really hope it will be good and better than previous model V8 Angel.
One more thing could it possible to add feature for smargo usb smartcard reader? Nowadays many internet provider begun to blocking the sharing traffic protocol. So in my opinion it really extremely nice if the box can support for usb device reader such smargo or other.
Please consider, any idea please welcome and share .....
Thank.
One more thing could it possible to add feature for smargo usb smartcard reader? Nowadays many internet provider begun to blocking the sharing traffic protocol. So in my opinion it really extremely nice if the box can support for usb device reader such smargo or other.
Please consider, any idea please welcome and share .....
Thank.
V8 Golden /Tested with v.643 20/12/17 properly recognized my irdeto CA card.
Re: Welcome Android GTC
please concentrate on developing libreelec and enigma2 on this box, the hell with android, for sat hobbies, all theycare is watching and play media, hire kszaq cvh or wrxtasy from libreelec dev team, this will become kick ass box
Re: Welcome Android GTC
Does it support Biss, PowerVu and Tandberg keys?
Re: Welcome Android GTC
good Android TV Box, there are minor flaws in DVB, I hope the new Firmware will solve all the problems
Re: Welcome Android GTC
Please someone show the picture... I also wish to see the capability of this.fgouveia wrote:Does it support Biss, PowerVu and Tandberg keys?
V8 Golden /Tested with v.643 20/12/17 properly recognized my irdeto CA card.
Re: Welcome Android GTC
please add biss, powervu and tandb key menu..
dvb c j83b no work
dvb c j83b no work
Re: Welcome Android GTC
Amigos, recibi mi GTC y lo estoy probando. Me gustó el diseño, el software cambió totalmente y aunque distinto, es agradable. Pero no consigo como introducir keys y el protocolo diseqc 1.1 no está funcionando. Solo me reconoce la antena que está en el puerto 1 del diseqc.
Re: Welcome Android GTC
With DiSEqC 1.1 I have had problems with Freesat units due to the over current protection tripping in when the second switch and or the LNB is powered on.fgouveia wrote:Amigos, recibi mi GTC y lo estoy probando. Me gustó el diseño, el software cambió totalmente y aunque distinto, es agradable. Pero no consigo como introducir keys y el protocolo diseqc 1.1 no está funcionando. Solo me reconoce la antena que está en el puerto 1 del diseqc.
Google translate:
Friends, I received my GTC and I am testing it. I liked the design, the software changed completely and although different, it's nice. But I do not get how to enter keys and the diseqc 1.1 protocol is not working. I only recognize the antenna that is in port 1 of the design.
Top
D
I solved this by adding a signal splitter or signal finder at the set top box end of the LNB cable. This adds impedance to the circuit and stops the over current tipping and stops the DiSEqC 1.1 8 port switch reverting to port one due to power off.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: Welcome Android GTC
I hope so please add biss optionlogo87 wrote:please add biss, powervu and tandb key menu..
dvb c j83b no work
Re: Welcome Android GTC
Feralkiwi wrote:With DiSEqC 1.1 I have had problems with Freesat units due to the over current protection tripping in when the second switch and or the LNB is powered on.fgouveia wrote:Amigos, recibi mi GTC y lo estoy probando. Me gustó el diseño, el software cambió totalmente y aunque distinto, es agradable. Pero no consigo como introducir keys y el protocolo diseqc 1.1 no está funcionando. Solo me reconoce la antena que está en el puerto 1 del diseqc.
Google translate:
Friends, I received my GTC and I am testing it. I liked the design, the software changed completely and although different, it's nice. But I do not get how to enter keys and the diseqc 1.1 protocol is not working. I only recognize the antenna that is in port 1 of the design.
Top
D
I solved this by adding a signal splitter or signal finder at the set top box end of the LNB cable. This adds impedance to the circuit and stops the over current tipping and stops the DiSEqC 1.1 8 port switch reverting to port one due to power off.
Owen
Ingenieros estan al tanto del problema y estan trabajando en eso
Re: Welcome Android GTC
Alguien sabe si el firmware del freesat Gtc se puede intalar en el V8 Angel? Gracias, Saludos
Re: Welcome Android GTC
I would think the Angle would reject the other software as all freesat units I have used will not load the wrong software.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 91
- Joined: Wed Jan 10, 2018 8:16 pm
Re: Welcome Android GTC
I can not make it work with disecq (4x1 by orbital tracker), or with multiswitch (2x4 by eagle aspen). I did it with the direct cable and I burn the cable. Any solution?
Last edited by iserimo.slv on Wed Jan 10, 2018 9:26 pm, edited 1 time in total.
Re: Welcome Android GTC
I do not understand what this is about?iserimo.slv wrote:I can not make it work with disecq (4x2 by orbital tracker), or with multiswitch (2x4 by eagle aspen). I did it with the direct cable and I burn the cable. Any solution?
Please explain more.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 91
- Joined: Wed Jan 10, 2018 8:16 pm
Re: Welcome Android GTC
google translateFeralkiwi wrote:I do not understand what this is about?iserimo.slv wrote:I can not make it work with disecq (4x2 by orbital tracker), or with multiswitch (2x4 by eagle aspen). I did it with the direct cable and I burn the cable. Any solution?
Please explain more.
Owen
I have my freesat GTC with the last update. But I can not make it work with a disecq (4x1), multiswitch (4x2). With the direct cable I worked for a moment, but I burn the cable by the voltage, maybe very loud. How can I make it work with diseqc or multiswitch?
español.
Tengo mi freesat GTC con la ultima actualizacion. Pero no puedo hacerla funcionar con un disecq (4x1), multiswitch (4x2). Con el cable directo me funciono por un momento, pero me quemo el cable por el voltaje, quizas muy alto. como puedo hacerlo funcionar con diseqc o multiswitch?
Re: Welcome Android GTC
I too are having problems with GTC and DiSEqC.
It switches DiSEqC 1.1 setting OK but does not switch the DiSEqC 1.0 beyond that.
Some older 4x1 switches needed the instruction sent twice, this was an option in the Freesat V8 Golden box.
I will do some testing on DiSEqC 1.0 switching with just a 4x1 switch tomorrow and report back.
To make 1.0 work I have been going to antenna settings and changing the DiSEqC 1.0 setting and then exiting back to the channel on that port. This works sometimes but is harder to work for scanning.
Owen
It switches DiSEqC 1.1 setting OK but does not switch the DiSEqC 1.0 beyond that.
Some older 4x1 switches needed the instruction sent twice, this was an option in the Freesat V8 Golden box.
I will do some testing on DiSEqC 1.0 switching with just a 4x1 switch tomorrow and report back.
To make 1.0 work I have been going to antenna settings and changing the DiSEqC 1.0 setting and then exiting back to the channel on that port. This works sometimes but is harder to work for scanning.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.