How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
Moderators: admin, nzl229, GTMedia Team
How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
by: cpr43
Enter DVB in main screen
Confirm
No program, please scan first, YES
Installation Menu
Scan all your satellites/ channels using DVB-S/S2
Hit 6666
CS Protocol will show up at the bottom
*Add an empty USB pen drive to the USB external connector
Move to the right to Protocol Settings
New screen will pop up:
-Protocol Type
-Server Settings
-Import USB Accounts
-Advance Settings
Hit OK at Advance Settings
-Import Oscam Conf
-Export Oscam Conf
Hit Export Oscam Conf. This will create 6 new files in your USB pen rive.
-Softcam.Key
-Oscam.Conf
-Oscam.Provid
-Oscam.Server
-Oscam.Srvid
-Oscam.User
Remove your USB pen drive from box and load it to your PC. Open the Softcam.Key file using your PC desktop program. For North America delete all keys in file. Add Power Vu keys using the following format:
Example:
P 0001006A 00 0123456789ABCD ;World TV (47.0W)
P 0001006A 01 0123456789ABCD ;World TV (47.0W)
P= Power Vu 0001= Satellite Sequencial order 006A= Channel sid 00/01- Power Vu keys; Channel Name-Sat
Add all the Power Vu EMM keys following the ECM keys
Tandberg
Enter keys same old way
T 0001 01 5FDB06AA1364E500 ;Band Internacional (58.0°W) - 4156 V 4300
Biss
F 00011FFF 00 F2 D4 CE 94 1B 67 B1 33 ; Earth TV Network 15.0W
F= Biss 0001= Channel sid 1FFF= Same 00/01 Biss Keys; Channel Name/ Sat/TP Info
Save new file as SAVE AS over the existing Softcam.Key file on USB location.
Load the USB to the Freesat GTC and load the files back to the box using the same procedure using IMPORT OSCAM CONF at the CS protocol -Advance Settings section.
(Note: Inputs are welcome)
by: cpr43
Enter DVB in main screen
Confirm
No program, please scan first, YES
Installation Menu
Scan all your satellites/ channels using DVB-S/S2
Hit 6666
CS Protocol will show up at the bottom
*Add an empty USB pen drive to the USB external connector
Move to the right to Protocol Settings
New screen will pop up:
-Protocol Type
-Server Settings
-Import USB Accounts
-Advance Settings
Hit OK at Advance Settings
-Import Oscam Conf
-Export Oscam Conf
Hit Export Oscam Conf. This will create 6 new files in your USB pen rive.
-Softcam.Key
-Oscam.Conf
-Oscam.Provid
-Oscam.Server
-Oscam.Srvid
-Oscam.User
Remove your USB pen drive from box and load it to your PC. Open the Softcam.Key file using your PC desktop program. For North America delete all keys in file. Add Power Vu keys using the following format:
Example:
P 0001006A 00 0123456789ABCD ;World TV (47.0W)
P 0001006A 01 0123456789ABCD ;World TV (47.0W)
P= Power Vu 0001= Satellite Sequencial order 006A= Channel sid 00/01- Power Vu keys; Channel Name-Sat
Add all the Power Vu EMM keys following the ECM keys
Tandberg
Enter keys same old way
T 0001 01 5FDB06AA1364E500 ;Band Internacional (58.0°W) - 4156 V 4300
Biss
F 00011FFF 00 F2 D4 CE 94 1B 67 B1 33 ; Earth TV Network 15.0W
F= Biss 0001= Channel sid 1FFF= Same 00/01 Biss Keys; Channel Name/ Sat/TP Info
Save new file as SAVE AS over the existing Softcam.Key file on USB location.
Load the USB to the Freesat GTC and load the files back to the box using the same procedure using IMPORT OSCAM CONF at the CS protocol -Advance Settings section.
(Note: Inputs are welcome)
- esmeralda1
- Posts: 54
- Joined: Fri Nov 17, 2017 3:20 pm
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
hi , the softcam ready update but dont work !!
has been testet on biss and powervu from last week ,but no luck
im thing the softcam dont respond too oscam and oscam dont respond to the box
im thing the freesat gtc works under CCcam ,
has been testet on biss and powervu from last week ,but no luck
im thing the softcam dont respond too oscam and oscam dont respond to the box
im thing the freesat gtc works under CCcam ,
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
Yes, I am in the same condition too.esmeralda1 wrote:hi , the softcam ready update but dont work !!
has been testet on biss and powervu from last week ,but no luck
im thing the softcam dont respond too oscam and oscam dont respond to the box
im thing the freesat gtc works under CCcam ,
Biss & PowerVu CAS does not work.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
you can use webinterface to debug this problem.
open website in your pc : http://stb_ip_address:8081
i think the key is old , you must upgrade key.
open website in your pc : http://stb_ip_address:8081
i think the key is old , you must upgrade key.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
I managed to edit softcam and open some powervu channels on Intelsat 20 68.5E and Measat 91.5E
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
I have a lot of confidence with this decoder, i hope the developers will continue supporting it until its fully autoroll and smooth. It will sell like a hot cake. V7 is a kid compared with the potential in this box.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
Thank you.Hawker wrote:I have a lot of confidence with this decoder, i hope the developers will continue supporting it until its fully autoroll and smooth. It will sell like a hot cake. V7 is a kid compared with the potential in this box.
Hello sir dvb scanning issue
I am use Nss6 95e sattlite use but issu is in this sattlite all FTA channels Free Sat GTC androids are not catch able please help me
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: Hello sir dvb scanning issue
I was same problem, In my case I had to set DISEqC1.1 on Port 1. Now problem solved.alvi201 wrote:I am use Nss6 95e sattlite use but issu is in this sattlite all FTA channels Free Sat GTC androids are not catch able please help me
Step 1 - open dvb app and in menu there is a option to reset app.
Step 2- go to antenna setting and set DISEqC1.1 on Port 1.
Step 3- Search your channels. Then add cs for dishtv.
Enjoy.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
Hello CPR43 and thank you for your excellent procedure Export/Import Oscam/Softcam.key. I received a new Freesat GTC android on Monday July 30. I connected it to my system programmed one satellite and elected to wait for later on the OTA upgrade. Using your procedure I exported Oscam Conf and it worked perfectly my pen drive showed 6 new files as you described. I edited the softcam file in my computer and was ready to reload back into the box. When I went back to my GTC box in accidently press OK on the OTA grade and the box upgraded perfectly no issues. But now when try to reload the files following your procedure, I get as far Move right to Protocol Setting and new screen showing Protocol Type, Server Settings, etc does not pop up. It seems that after the OTA upgrade I have lost the export/import Oscam Conf function. I will appreciate your help and thanks for all your great support.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
You will need to wait for new update to fix this problem. If you load the softcam with your keys before it won't be erase with the update and should work as beforeHank4 wrote:Hello CPR43 and thank you for your excellent procedure Export/Import Oscam/Softcam.key. I received a new Freesat GTC android on Monday July 30. I connected it to my system programmed one satellite and elected to wait for later on the OTA upgrade. Using your procedure I exported Oscam Conf and it worked perfectly my pen drive showed 6 new files as you described. I edited the softcam file in my computer and was ready to reload back into the box. When I went back to my GTC box in accidently press OK on the OTA grade and the box upgraded perfectly no issues. But now when try to reload the files following your procedure, I get as far Move right to Protocol Setting and new screen showing Protocol Type, Server Settings, etc does not pop up. It seems that after the OTA upgrade I have lost the export/import Oscam Conf function. I will appreciate your help and thanks for all your great support.
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
Thanks CPR43 for ALL your great support. Yes another OTA update restored the export/import function.
Hank
Hank
-
- Posts: 91
- Joined: Wed Jan 10, 2018 8:16 pm
Re: How to Export/ Import Oscam/ Softcam.key file from Freesat GTC android
I have the SoftCam.Key file ready, but I do not have the keys to place them and open the 30W FTA ... Check the link for your comments.
viewtopic.php?f=55&t=9145
viewtopic.php?f=55&t=9145