GTC NEW VERSION RELEASE C20.A6.2.29

[usat5]

http://192.168.9. 34 :8081




like this put ip adress off you satellite receiver

It's ok now, after a factory reset it's working, thank you for your support!

[alexchen]

I dont think Autoroll is working. I have found that there are same sid issues like others in the past. I found that it can open channels in a TP with ECM keys but can not open others within the same TP which use same keys.


3) add ATSC-C(J.83B);
I will like to know how will this work using the actual -C tuner??

Thanks for fixing front screen time correctly in launcher
and the google crash! Excellent job

you can use C tuner scan j.83b frency in Brazil and North America.

[alexchen]

ive found you cannot change audio on most channels as well.. is there a way to edit pids?

yes ,u can edit pids .edit satellites_xxxxx.xml file.

[alexchen]

full scan dublicate the channes problem no digitalb and powervue frequency missing

yes ,i find the frency table is old ,i will update the new database and preset.

[alexchen]

I found can not search signal of 111700 H 30000 of Thaicom KU 78.5E , LNB of universal and now I try add and search signal of Thaicom 78.5 C-band and KU-Band, this box found satellite channel both C-Band and KU-Band but I can watch only one band. may be I am confuse setting.

Please help me or explain this issue. Thanks

We have already fix the problem . the new version (C20.A6.2.30)will be ota upgrade the week.Thank you.

[cpr43]

I dont think Autoroll is working. I have found that there are same sid issues like others in the past. I found that it can open channels in a TP with ECM keys but can not open others within the same TP which use same keys.


3) add ATSC-C(J.83B);
I will like to know how will this work using the actual -C tuner??

Thanks for fixing front screen time correctly in launcher
and the google crash! Excellent job

you can use C tuner scan j.83b frency in Brazil and North America.

DVB-T2 connector is different to ATSC conn. How could be possible??

[alexchen]

I dont think Autoroll is working. I have found that there are same sid issues like others in the past. I found that it can open channels in a TP with ECM keys but can not open others within the same TP which use same keys.


3) add ATSC-C(J.83B);
I will like to know how will this work using the actual -C tuner??

Thanks for fixing front screen time correctly in launcher
and the google crash! Excellent job

you can use C tuner scan j.83b frency in Brazil and North America.

DVB-T2 connector is different to ATSC conn. How could be possible??

Yes , we can do it. its core secrets.

[alexchen]

kanal sıralaması -1 , -1 , -1...... şeklinde.

bunu nasıl düzeltebilirim?

u can use blind scan or wait the new version . thank you .

[symfony x]

arreglar todos los transpondedores de los satélites banda ku scan exportar cccam por USB lista favorito etc...listas de canales se repite en lista. mando programar ok salida de canales .editar transpondedores, búsqueda a ciega en escan gracias nueva versión realese c20.a6.2.30 saludos..

[RGG1]

new problem muve channels up and down batten is missing , this problem has not been fix

Hola,
En esta actualización se ha solucionado el fallo de las paradas de google y también sale correctamente la hora del reloj, pero siguen sin poder moverse los canales arriba y abajo con el botón mover (el botón de renombrar canales funciona bien). También siguen sin poder exportarse los datos DVB, sale fallo error code 2.
Editar los canales sobre el archivo .xml puede ser delicado, porque un fallo cuando se modifica el archivo puede traer fallos más graves en la programación.
Por último, y ya me pasaba en la anterior actualización, la numeración de los canales en vez de tenerlos del 1 al 417 en mi caso, me salen del 2200 al 4700. Supongo que si hiciese un reset de fábrica quizás aparecerían desde el 1.
De todas formas agradecer de nuevo el trabajo, el esfuerzo y el interés del equipo de freesat en mejorar esta caja.

[Feralkiwi]

Many of my channels now report, "Channel has changed. Re scan, yes no"

User data base does not save to USB as USB is not enabled, only internal memory.

Blind scan does not find 12295 V 1644 on Optus D2@152e, radio stations only.

DiSEqC 1.0 with DiSEqC 1.1:
I'm using cascade switching, both 1.0 and 1.1 through a 8 port switch first and then a 4 port switch.
I find that the second switch is often not set, only the DiSEqC 1.1 switch.
More so when scanning.
I find that if I go to the antenna set up and change the DiSEqC 1.0 setting and then go to scanning I can get the correct switch.

Eak_Dummern: this may be your problem with accessing one band only. Maybe the 22kHz is not being set to "ON" for your high band. Try using 10600 and 22kHz "ON" to check.

Owen

[RGG1]

Many of my channels now report, "Channel has changed. Re scan, yes no"

User data base does not save to USB as USB is not enabled, only internal memory.

Blind scan does not find 12295 V 1644 on Optus D2@152e, radio stations only.

DiSEqC 1.0 with DiSEqC 1.1:
I'm using cascade switching, both 1.0 and 1.1 through a 8 port switch first and then a 4 port switch.
I find that the second switch is often not set, only the DiSEqC 1.1 switch.
More so when scanning.
I find that if I go to the antenna set up and change the DiSEqC 1.0 setting and then go to scanning I can get the correct switch.

Eak_Dummern: this may be your problem with accessing one band only. Maybe the 22kHz is not being set to "ON" for your high band. Try using 10600 and 22kHz "ON" to check.

Owen

It also appears to me that the channel has changed and if I want to update it.

[Lining]

I've selected some channels, added as favourites, nothing seems to be saved, anyone?

Under Channel Manger ----- Select Channel Press OK √ ---------- Select FAV to add

[Feralkiwi]

Many of my channels now report, "Channel has changed. Re scan, yes no"
Owen

Further tests show this is due to the DiSEqC 1.0 not switching and there being a TP with the same values on the sat on Port 1 of that DiSEqC 1.0 switch.
In my case I have Optus D1 on port 6 / Port 1 and Optus D2 on Port 6 / Port 2.
Optus D1 and D2 have their TP's all with 22500 sr, so this report of "Channel Has Changed" is from this.
It is a failure to switch DiSEqC 1.0 settings.

Owen

[Lining]

new problem muve channels up and down batten is missing , this problem has not been fix

The A29 version does not increase the mobile channel button, and the later version will increase.

[Lining]

full scan dublicate the channes problem no digitalb and powervue frequency missing

Did you update the 29 version of the OTA, or do you have the old version of the new DB?

After recommending OTA, do the program search, backup program DB, and then import DB.

[Lining]

full scan dublicate the channes problem no digitalb and powervue frequency missing

Did you update the 29 version of the OTA, or do you have the old version of the new DB?

After recommending OTA, do the program search, backup program DB, and then import DB.

[esmeralda1]

@ lining

here is my channel list back up

here is picture with the latest update

[satdxer]

kanal sıralaması -1 , -1 , -1...... şeklinde.

bunu nasıl düzeltebilirim?

u can use blind scan or wait the new version . thank you .

Blind scan is a waste of time please fix reproted here viewtopic.php?f=55&t=5501

And also in this thread

[ugurtabu]

it went back to the factory settings. I ran the channels again. how can I sort channels manually.
can I also enter a special ip tv username?
Or do I need to enter the m3u address?

[freesatv7]

UHD no long show after update. Fashion on 76.5

[taikwang]

Time in main menu is correct
But time in DVB menu is not

[taikwang]

I found some problems should be fixxed and function need to be added.
- Wrong time zone in DVB app
- Cannot schedule record DVR timer.
- Cannot stop while recording.

[alexchen]

I found some problems should be fixxed and function need to be added.
- Wrong time zone in DVB app
- Cannot schedule record DVR timer.
- Cannot stop while recording.

DVB TIME is from satellites.its not UTC network time. we will check in local.
thank you!

[alexchen]

it went back to the factory settings. I ran the channels again. how can I sort channels manually.
can I also enter a special ip tv username?
Or do I need to enter the m3u address?

you can sort by fllow.
viewtopic.php?f=56&t=5653