GTMEDIA Forum

Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hola, que susto cuando he leido el post creia que habia una version nueva para GTC, me figuro que estaran en ello pues a mi me pasa lo mismo, no escanea todos los canales, esperemos que lo solucionen pronto

GTC NEW VERSION RELEASE C20.A6.2.30 no update here via ota

estupendo gracias a los chicos de freasat hay ke seguir mejorando esta caja falta muchas configuraciones ke mejorar un saludo symfony x

Try adding SAT2IP in next update.

Ok got GTC online & it asked to update,so i did.
Downloaded update,then says "Downloading is finished,Auto updating begin,Please do not power off"
But is doing NOTHING NOW.Do i need to press any button? Just stuck on that screen,10 mins now.
What is supposed to be happening?

alexchen wrote:Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hello,
In this new update the move button still does not appear to be able to move the channels, it does not allow to export the DVB data and in the upper right corner the Chinese time appears instead of the local time (only the time in channel management appears wrong).

how can i get back to previous version
this one has stopped my DVB C from working
thank you

efenergi wrote:how can i get back to previous version
this one has stopped my DVB C from working
thank you

please try to auto scan DVBC

amvijoi wrote:Try adding SAT2IP in next update.

Sorry,it not OK. i try it and send the stream to PC IPAD IPHONE ANDROID PHONE. but the 2.4G network cant transfer stream .
The receiving device watch stream has a lot of mosaic.

Do u have any idear for fix this proplem. we will try it.

esmeralda1 wrote:GTC NEW VERSION RELEASE C20.A6.2.30 no update here via ota

its ok,if you have any question,please sent your sn id. thankyou.

skideric wrote:Ok got GTC online & it asked to update,so i did.
Downloaded update,then says "Downloading is finished,Auto updating begin,Please do not power off"
But is doing NOTHING NOW.Do i need to press any button? Just stuck on that screen,10 mins now.
What is supposed to be happening?

you can reboot gtc .

efenergi wrote:how can i get back to previous version
this one has stopped my DVB C from working
thank you

Please check your area, frequency, enter OK.

RGG1 wrote:

alexchen wrote:Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hello,
In this new update the move button still does not appear to be able to move the channels, it does not allow to export the DVB data and in the upper right corner the Chinese time appears instead of the local time (only the time in channel management appears wrong).

1. Frequency management, channel movement, the next version increased
2. The main interface time is displayed as network time, please set the time zone
3. Channel list and EPG are shown as program satellite time

symfony x wrote:estupendo gracias a los chicos de freasat hay ke seguir mejorando esta caja falta muchas configuraciones ke mejorar un saludo symfony x

gracias!

Manluis2003 wrote:Hola, que susto cuando he leido el post creia que habia una version nueva para GTC, me figuro que estaran en ello pues a mi me pasa lo mismo, no escanea todos los canales, esperemos que lo solucionen pronto

por favor, puedes actualizar la nueva version o utilizar blindscan

Lining wrote:

RGG1 wrote:

alexchen wrote:Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hello,
In this new update the move button still does not appear to be able to move the channels, it does not allow to export the DVB data and in the upper right corner the Chinese time appears instead of the local time (only the time in channel management appears wrong).

1. Frequency management, channel movement, the next version increased
2. The main interface time is displayed as network time, please set the time zone
3. Channel list and EPG are shown as program satellite time

Ok thank you very much for your work and effort, I hope so for the new update.

Lining wrote:

RGG1 wrote:

alexchen wrote:Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hello,
In this new update the move button still does not appear to be able to move the channels, it does not allow to export the DVB data and in the upper right corner the Chinese time appears instead of the local time (only the time in channel management appears wrong).

1. Frequency management, channel movement, the next version increased
2. The main interface time is displayed as network time, please set the time zone
3. Channel list and EPG are shown as program satellite time

2. The time is set, but it appears wrong on the channel management screen (the Chinese time appears), however the local time is displayed correctly on the main screen and box display.

RGG1 wrote:

Lining wrote:

RGG1 wrote:

alexchen wrote:Date:2018.01.20
Software version:C20.A6.2.30

1) fix GTC can't scan all programs on satellite 19.2E


fix blind scan frequence vaule is error.
fix auto scan cant lock.

Hello,
In this new update the move button still does not appear to be able to move the channels, it does not allow to export the DVB data and in the upper right corner the Chinese time appears instead of the local time (only the time in channel management appears wrong).

1. Frequency management, channel movement, the next version increased
2. The main interface time is displayed as network time, please set the time zone
3. Channel list and EPG are shown as program satellite time

2. The time is set, but it appears wrong on the channel management screen (the Chinese time appears), however the local time is displayed correctly on the main screen and box display.

Thank you very much, we also found this problem, the next version to solve.

bug in ATSC C J83B scan good . saved in dvb c and no signal in dvb c . please fix scan atsc j83b and add in atsc j83b. for america and soud america .

Hola amigos, soy nuevo, donde descargar el firmware?
Gracias

JASEHOME wrote:Hola amigos, soy nuevo, donde descargar el firmware?
Gracias

Connect your GTC to the internet and use the menus to check for software update.
The unit will down load the software.
This can take some time, 5-7 minutes.

Owen

No se suponía que arreglarían lo de la edición de canales en la siguiente actualización?

Where can I get new version release for gtc c20.a6.2.30