GTMEDIA Forum

Solo se actualiza por OTA (o sea por internet)

I will suggest to add more information in the INFO main screen for channels as to:

Encryption Type
Video Type- ej: 480i H.264 SD/HD
Subt or TTX
Audio Types Ej: AAc, AC3
Satellite Name
Satellite TP

cpr43 wrote:I will suggest to add more information in the INFO main screen for channels as to:

Encryption Type
Video Type- ej: 480i H.264 SD/HD
Subt or TTX
Audio Types Ej: AAc, AC3
Satellite Name
Satellite TP

Good suggest.

pelu26 wrote:No se suponía que arreglarían lo de la edición de canales en la siguiente actualización?

Lo último que he leído es que aseguran que en la próxima actualización 31 quedará solucionado el problema del movimiento de canales añadiendo el botón mover.

Hola, las actualizaciones son automaticas, o las hay que hacer manualmente, si son manualmente haber si alguien explica como hacerlas

El deco te avisara, saldra una ventana (Cuando le de por acceder), es como los moviles.
A mi el primer dia le costo como 3 o 4 horas avisarme de que habia actualizacion.

cpr43 wrote:I will suggest to add more information in the INFO main screen for channels as to:

Encryption Type
Video Type- ej: 480i H.264 SD/HD
Subt or TTX
Audio Types Ej: AAc, AC3
Satellite Name
Satellite TP

Yeah good suggestion. It will help a lot.

There is an error, at least for me, on the program info.
The first program end time is always the same of the start time.
No mather on what channel i am

also the strenght and quality of the signal is always 95% for me on all the channels. I dont think this is a real value.

Desde la actualización C20.A6.2.28, no me conecta el server mgcamd, por favor corregir los parametros de los protocolos mgcamd a la version A6.2.28 o anterior.

Otro punto es que al ordenar alfabeticamente los canales, no les asigna el numero de menor a mayor, sino que sigue arrastrando el numero original del canal con el que fue escaneado. ejemplo
Orden de Escaneo (inicial)
525 AMC
150 A&E
213 Antena3

Ordenado Alfabéticamente
213 Antena3
525 AMC
150 A&E

Donde Antena3 (tendría que adoptar el numero 1, y no mantener el del orden de escaneo inicial)

I found that clicking on "Later" for the update does not stop the GTC from updating.

I powered on with the net connected and it offered the new update found "Update Now, later" option.
I clicked on "Later"

I was then watching channels and was scanning when I noted a message in the bottom right "Downloading new software, or something like that.

THEN a message flashed up "Update ready install now" "Yes, NO" (something like that) and before I could read it properly and click "NO" it just when and did it.
It was some minutes before I could use the unit again.

Saying "Later" to "New software found, load now" does not work.

Owen

Si buscas los canales de Movistar, ya no están, han dejado de emitir por hispasat.
Solo por Astra.

I found antoher bug in sowtware C20.A6.2.30:

If channel have more then 4 audio streams (6 for example), in Audio menu You can see only 4.
Only possibility to select rest od them is manually edit channels file (XML) and remove unwanted audio streams from channel definition (leave max 4 streams).

This is DVB GUI problem.

GTC NEW VERSION C20.A6.2.30 has cccam problem? freezing every 2minutes

http://freesat.cn/forum/viewtopic.php?f ... 9504e80a7b

Las CCcam funcionan perfectamente (por lo menos las mias) y el importar las CCcam por USB son lo unico que veo que funciona bien.

El resto como la ordenacion de la lista de canales, el salvarla y cargarla e incluso el arranque para ver un canal la primera vez no entra (o tarda muchiiiiiisimo) y tienes que salir y volver a entrar, el moverse por los canales que cuando das a OK se va a otro canal diferente.

maam64 wrote:Las CCcam funcionan perfectamente (por lo menos las mias) y el importar las CCcam por USB son lo unico que veo que funciona bien.

not work dr. still have problem in CCcam

Hola, Me compre una GTC pero todavia no logro ver canales encriptados ni Pv o biss,ya trate de meter una softcam,segui todo el proceso pero nada aun,Alguien me ayuda por favor.Gracias Saludos.

xtraveo wrote:Hola, Me compre una GTC pero todavia no logro ver canales encriptados ni Pv o biss,ya trate de meter una softcam,segui todo el proceso pero nada aun,Alguien me ayuda por favor.Gracias Saludos.

La GTC el softcam hay que editarlo pues la forma en que se escribe es diferente. Sigue las instrucciones aqui para que puedas editar tu softcam


viewtopic.php?f=55&t=5655&sid=15222daee ... d773be544b

Las llaves Biss debe ser asi:

F 00061FFF 00 2A00E30D15D7B6A2 ;MULTIVISION (30.0°W)
F 00061FFF 01 2A00E30D15D7B6A2 ;MULTIVISION (30.0°W)


F= Biss
0006= sid
1FFF= Biss Std
00= Linea
2A00E30D15D7B6A2= Llaves
MULTIVISION (30.0°W)= Nombre Canal/ Satelite

Gracias,Cpr43 agarre la idea.vamos hacer una prueba.Saludos

Hi, GTT totally cannot watch beside normal local channel... how come ??? Yest it is working fine. Now become like that.

Hello, I had this box 2 days now.

The box did not find 19.2 E - Sky Bundesliga and Sky Sport. Can not find with Auto-Scan and Blind-Scan. Is there any new version of dtv.apk(Receiver is updated)?

With my other android receiver(not same brand), there is no problem to find Sky.

And is there any method to resort my channellist or must I use the .xml file for this?

Is there any chance that reported bugs will be fixed?

When PVR will be implemented? I bought GTC being rewritten that I can program the recording at time or from EPG, but there is no such function. I was cheated. I'll probably ask the seller for a refund.

winkmal4 wrote:Hello, I had this box 2 days now.

The box did not find 19.2 E - Sky Bundesliga and Sky Sport. Can not find with Auto-Scan and Blind-Scan. Is there any new version of dtv.apk(Receiver is updated)?

With my other android receiver(not same brand), there is no problem to find Sky.

And is there any method to resort my channellist or must I use the .xml file for this?

Check that you have the correct setting in the Antenna setting menu.
Polarity set to auto. LNB set to 9750/10600 if you have a uni LNB
DiSEQc Switch setting. Note I have had problems with DiSEqC cascade switching not working, that is both 1.0 and 1.1 switching at same time.

Owen

Can someone tell me is it possible to port the application gt media in the Ki pro. There chipset is the same. I'm not sure about the tuner. Image quality on android is not important and on linux did not try. I so understand that gt media system application, can who will extend and will throw off
Thanks