Page 1 of 1
[GTT/GTC] enters recovery mode, USB upgrade?
Posted: Tue Mar 20, 2018 6:27 am
by Lining
Re: GTC enters recovery mode, USB upgrade?
Posted: Tue Mar 20, 2018 4:39 pm
by arshad
Hi, I downloaded the Zip file and copied into USB drive, inserted into GTC, but nothing happened.
Actually My problem is: When I power on GTC is stuck on yellow led light. No display on GTC, No display on TV,
then how to enter into recovery mode???
Please tell me how to get recovery mode because my GTC is showing nothing except yellow led.
Re: GTC enters recovery mode, USB upgrade?
Posted: Thu Mar 22, 2018 8:12 am
by Lining
arshad wrote:Hi, I downloaded the Zip file and copied into USB drive, inserted into GTC, but nothing happened.
Actually My problem is: When I power on GTC is stuck on yellow led light. No display on GTC, No display on TV,
then how to enter into recovery mode???
Please tell me how to get recovery mode because my GTC is showing nothing except yellow led.
viewtopic.php?f=51&t=6878&sid=786202591 ... b72#p26089
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Thu Mar 22, 2018 7:52 pm
by Hanilog
Thank you lining
Now you are a professional and you have given the solution for many people who have the freesat gtc dead.
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Fri Mar 23, 2018 6:02 am
by petras54
where to get firmware. img?
USB Burning Tool.
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Fri Mar 23, 2018 11:40 pm
by Feralkiwi
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Sat Mar 24, 2018 6:42 am
by arshad
USB Burning tool requires .img file for firmware that is not uploaded on this forum. present file is zip which cannot be used with usb image burning tool. for second option, is as there is no physical reset button, how to get GTC in recovery mode??
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Sun Mar 25, 2018 10:49 am
by petras54
Dear Lining,
Please upload firmware.img file for use it with usb image burning tool
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Wed Apr 04, 2018 6:06 am
by IPTVKid
arshad wrote:USB Burning tool requires .img file for firmware that is not uploaded on this forum. present file is zip which cannot be used with usb image burning tool. for second option, is as there is no physical reset button, how to get GTC in recovery mode??
I manage to enter recovery mode installing app Reini, the logo is a green letter R.......
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Thu Apr 05, 2018 12:52 am
by Feralkiwi
There is this
new posting by Lining that has the image link and the tool on it.
Owen
Re: GTC enters recovery mode, USB upgrade?
Posted: Thu Jun 07, 2018 3:45 pm
by minaus
Lining wrote:arshad wrote:Hi, I downloaded the Zip file and copied into USB drive, inserted into GTC, but nothing happened.
Actually My problem is: When I power on GTC is stuck on yellow led light. No display on GTC, No display on TV,
then how to enter into recovery mode???
Please tell me how to get recovery mode because my GTC is showing nothing except yellow led.
viewtopic.php?f=51&t=6878&sid=a809c30f9 ... 6bf#p26089
Hi Lining, I'm interesting to procedure, but url link doesn't work. Can you post it again?
Thanks for advance.
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Thu Jun 07, 2018 9:32 pm
by Feralkiwi
Try
this link or look at the options in "Tools" at the top of the GTC page.
Owen
Re: [GTT/GTC] enters recovery mode, USB upgrade?
Posted: Wed Jan 30, 2019 10:53 pm
by juan_vale
AFAIK most firmwares have been removed from the site, this is because there are now two versions of the GTC, a V2 and a V3 and the firmwares are not interchangeable. The concern is that people with little experience are going to brick their boxes by writing the wrong software to it.
Some of the earlier softwares are available off-site, using google I found some, but not all, I believe 6.2.37 was the most recent I could find. This problem is not going to get better.