Page 1 of 1

Signal level 95%

Posted: Mon Apr 16, 2018 7:47 pm
by Koko1456
Hello.
Can somebody check and post Your signal level?
My GTC shows only two levels - 95% or 0%. There is no other between. I think signal meter is dummy.

Re: Signal level 95%

Posted: Mon Apr 16, 2018 9:18 pm
by rafelingojuryu
take a picture to show it.

Re: Signal level 95%

Posted: Thu Apr 26, 2018 2:03 pm
by butcher0288
Hello mine too ...

My luck is that i had another satelite receiver and i know that the dish is ok ...

Should correct this too ...

Re: Signal level 95%

Posted: Thu Apr 26, 2018 4:01 pm
by Channel Master
The top line with 95 tells you your lnb/lnbf's are working. The bottom line will say zero until you lock a signal. This is how I tune my dishes. I take tv and freesat receiver out near dish and watch bottom line for the highest number to appear. No, I don't have a good satellite meter. Disconnect your coax from freesat and you will see the 95 (top line) vanish.

Re: Signal level 95%

Posted: Thu Apr 26, 2018 4:15 pm
by butcher0288
That can be true but.
When you change between channels you should see different values ... because the quality is different between them ...

Re: Signal level 95%

Posted: Fri Apr 27, 2018 2:55 pm
by fangzhi
Hello mine too ...

Re: Signal level 95%

Posted: Sat Apr 28, 2018 12:29 am
by IPTVKid
butcher0288 wrote:That can be true but.
When you change between channels you should see different values ... because the quality is different between them ...
If channels are in the same TP there will be no difference, the correct test has to be one channel of a TP then look for another channel that is on a different TP, now you can use RECALL button and see the difference in the Quality %.

Re: Signal level 95%

Posted: Mon Apr 30, 2018 6:55 pm
by butcher0288
RTP1 of Meo Signal 95% quality 95%
TVCINE1 of Meo Signal 95% quality 95%

different transponders

Exact same thin

Re: Signal level 95%

Posted: Wed May 02, 2018 5:34 pm
by azboxlibre
Mine here does not matter at 70W. It is not an antenna problem, it looks only in the same place that I have Net Atto the normal signal, in it no signal, nor blind scanning.

Freesat DCt = https://uploaddeimagens.com.br/imagens/ ... 5138_p-jpg
https://uploaddeimagens.com.br/imagens/ ... 5227_p-jpg
Atto Net = https://uploaddeimagens.com.br/imagens/ ... 0019_p-jpg
https://uploaddeimagens.com.br/imagens/ ... 0153_p-jpg

Re: Signal level 95%

Posted: Wed May 02, 2018 8:49 pm
by Feralkiwi
You can add images by clicking on the "Img" button and placing the web address between the Img and /Img brackets.

Code: Select all

[img]https://uploaddeimagens.com.br/imagens/[/img]
Or you can upload them by clicking on the Attachments tag below the post reply window.

Any link to an image will not work if a sign in is needed, like these images.

Owen

Re: Signal level 95%

Posted: Fri May 04, 2018 11:22 am
by azboxlibre
I'm going to solve it myself. I'm trying to compile a kodi here from another deco that works very well, but hindsight is to install his DVB system. App is not being accepted by it.

If anyone knows how I could help? This is his apparent dvb app.

https://www.4shared.com/rar/pmEEtbYtee/ ... _atto.html?