After restart DVB-S/S2 signal problem
Moderators: admin, nzl229, GTMedia Team
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
After restart DVB-S/S2 signal problem
Hello,
Today after restart the box (power failure), 60% DVB-S/S2 channel have no signal. But 40% channel working.
I tried factory reset the box, and check everything but still channels not coming.....
I tried v7hd with same cable and got around DVB-S S2 700+ channels.... But with GTC now I'm getting only 290 channels.
Tomorrow I'll downgrade ROM through usb update option to see if it working or not.... But if anyone have any solution, please reply.
Note: I'm using only single dish, 95'E NSS6/Ses8.
Today after restart the box (power failure), 60% DVB-S/S2 channel have no signal. But 40% channel working.
I tried factory reset the box, and check everything but still channels not coming.....
I tried v7hd with same cable and got around DVB-S S2 700+ channels.... But with GTC now I'm getting only 290 channels.
Tomorrow I'll downgrade ROM through usb update option to see if it working or not.... But if anyone have any solution, please reply.
Note: I'm using only single dish, 95'E NSS6/Ses8.
Re: After restart DVB-S/S2 signal problem
I have had problems with DiSEqC switching on the GTC, it does not always switch as set.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: After restart DVB-S/S2 signal problem
But I'm not using DiSEqC switch.. only single dish.Feralkiwi wrote:I have had problems with DiSEqC switching on the GTC, it does not always switch as set.
Owen
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: After restart DVB-S/S2 signal problem
I done every test.... Still not getting channels..... It looks like hardware fault or software issue. I mainly use it for DVB-S/S2,
After usb upgrade i can able to find channels on 95'e channels, but no signal after restart the box...
Can anyone help me please if my hardware has fault?
After usb upgrade i can able to find channels on 95'e channels, but no signal after restart the box...
Can anyone help me please if my hardware has fault?
Last edited by rohitpoint on Sat May 26, 2018 9:27 am, edited 1 time in total.
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: After restart DVB-S/S2 signal problem
While blind scan, I'm getting all channels twice. But actuate search help to correct it.....
But some TP is not supported on this costly box, even v7hd can search it well..... Very disappointed with this box.
Update- all H265, HD channels, and FTA channels working well but $ MPEG-2 channels have problem.
But some TP is not supported on this costly box, even v7hd can search it well..... Very disappointed with this box.
Update- all H265, HD channels, and FTA channels working well but $ MPEG-2 channels have problem.
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: After restart DVB-S/S2 signal problem
Anyone please solve my issue.... The box is not usable now
Re: After restart DVB-S/S2 signal problem
I got the same and I haven't found a solution yet
Re: After restart DVB-S/S2 signal problem
Hi
I've had this problem too.
In my case I had to set DISEqC1.1 on Port 1.
You have to know that I have only only one dish and one converter but without this setting my receiver can find only half of transponders and channels.
I've added picture of my settings.
I've had this problem too.
In my case I had to set DISEqC1.1 on Port 1.
You have to know that I have only only one dish and one converter but without this setting my receiver can find only half of transponders and channels.
I've added picture of my settings.
- Attachments
-
- IMG_0504.jpg (105.15 KiB) Viewed 5356 times
Re: After restart DVB-S/S2 signal problem
Thanks I gonna try this solution. Any comments from freesat side on this issue?
-
- Posts: 32
- Joined: Sat May 05, 2018 10:10 am
- Location: Kolkata, India
- Contact:
Re: After restart DVB-S/S2 signal problem
mr_roba wrote:Hi
I've had this problem too.
In my case I had to set DISEqC1.1 on Port 1.
You have to know that I have only only one dish and one converter but without this setting my receiver can find only half of transponders and channels.
I've added picture of my settings.
Thanks this solved my problem.... This means problem in software side.
GTMedia please solve this problem through software update.
-
- Posts: 18
- Joined: Thu Mar 01, 2018 3:48 pm
Re: After restart DVB-S/S2 signal problem
I already returned mine for lack of support! I'll get my money back and buy an Amiko A5! Freesat nerver more!!rohitpoint wrote:mr_roba wrote:Hi
I've had this problem too.
In my case I had to set DISEqC1.1 on Port 1.
You have to know that I have only only one dish and one converter but without this setting my receiver can find only half of transponders and channels.
I've added picture of my settings.
Thanks this solved my problem.... This means problem in software side.
GTMedia please solve this problem through software update.
The aliexpress seller also said that the company he represents no longer sells!
Re: After restart DVB-S/S2 signal problem
mr roba would you share your channel list please? Which country are you from?
KR
dawid
KR
dawid
Re: After restart DVB-S/S2 signal problem
I'm coming from Poland.harryd wrote:mr roba would you share your channel list please? Which country are you from?
KR
dawid
I'm sorry but I can't share my channel list because database error when exporting.
It is a common problem when you change something in channel list then you can't export it.
Re: After restart DVB-S/S2 signal problem
I payed dearly for an Amico A3.azboxlibre wrote: I already returned mine for lack of support! I'll get my money back and buy an Amiko A5! Freesat nerver more!!
The aliexpress seller also said that the company he represents no longer sells!
It is a pig!
The menu and channel change is horrible.
The only plus was it "just" did those TP's with multistream until I updated it.
One software update and then no more.
It would not update a TP that changed it's SR.
No powervu.
Good luck and I expect to see you back here.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: After restart DVB-S/S2 signal problem
Hi,
Sometimes lost all channels at bindscan. It's very odd.
Sometimes lost all channels at bindscan. It's very odd.