Totally disillusioned customer

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

levadura
Posts: 26
Joined: Tue Aug 07, 2018 8:14 pm

Re: Totally disillusioned customer

Post by levadura »

no he conseguido que me funcione ni el mando ni la sintonizadora que no me la reconoce

he encontrado esto para el tbs5520se CoreELEC/dvb-firmware ***

Code: Select all

s://github.com/CoreELEC/dvb-firmware/archive/1.2.5.zip   

pero no se donde ponerlo para que funcione


gracias

I have not managed to get the control or the tuner that does not recognize me

I found this for the tbs5520se CoreELEC / dvb-firmware ***

Code: Select all

 s://github.com/CoreELEC/dvb-firmware/archive/1.2.5.zip  
but I do not know where to put it to work


Thank you

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

levadura wrote:no he conseguido que me funcione ni el mando ni la sintonizadora que no me la reconoce

he encontrado esto para el tbs5520se CoreELEC/dvb-firmware ***

Code: Select all

s://github.com/CoreELEC/dvb-firmware/archive/1.2.5.zip   

pero no se donde ponerlo para que funcione


gracias

I have not managed to get the control or the tuner that does not recognize me

I found this for the tbs5520se CoreELEC / dvb-firmware ***

Code: Select all

 s://github.com/CoreELEC/dvb-firmware/archive/1.2.5.zip  
but I do not know where to put it to work


Thank you

After you have installed firmware and dvb tbs driver you need install from coreelec repository tvheadend server and client.
From your pc browser you must connect to your box with IPbox:9981 and can managed usb tuner and channel search.
See around g@@gle you can find many easy documentation.
Regards.

levadura
Posts: 26
Joined: Tue Aug 07, 2018 8:14 pm

Re: Totally disillusioned customer

Post by levadura »

Yo he instalado estas dos versiones de coreelec
CoreELEC-S905.arm-8.95.2.img.gz
CoreELEC-S905.arm-9.0-devel-1537560336.img.gz
como dtb.img el gxl_p231_2g_dvb.dtb
por ssh le instales el Remote.zip que ha subido linch
he conseguido que funcione el mando a distancia pero la sintonizadora no me la reconoce en ninguno de los casos, entro a tvheadend ip:9981 pero no detecta la sintonizadora he instalado las tres opciones de drivers que trae CoreELEC-S905.arm-9.0-devel-1537560336.img.gz reiniciando con cada una de ellas y no me la reconoce

no se que sintonizadora trae el gtc que es la que yo he probado, crei entender que la que trae por defecto era la tbs5520se no se si es esa.

gracias por adelantado

I have installed these two versions of coreelec
CoreELEC-S905.arm-8.95.2.img.gz
CoreELEC-S905.arm-9.0-devel-1537560336.img.gz
as dtb.img the gxl_p231_2g_dvb.dtb
by ssh you install the Remote.zip that has uploaded linch
I have managed to operate the remote control but the tuner does not recognize it in any of the cases, I enter tvheadend ip: 9981 but it does not detect the tuner I have installed the three driver options that CoreELEC-S905.arm-9.0-devel brings -1537560336.img.gz restarting with each of them and does not recognize me

I do not know what tuner brings the gtc that is the one that I have tried, I thought I understood that the one that brings by default was the tbs5520se I do not know if it is that.

thanks in advance

User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: Totally disillusioned customer

Post by Marsat »

eumesmo wrote:
espaun206 wrote:
levadura wrote:Yo he instalado estas dos versiones de coreelec
CoreELEC-S905.arm-8.95.2.img.gz
CoreELEC-S905.arm-9.0-devel-1537560336.img.gz
como dtb.img el gxl_p231_2g_dvb.dtb
por ssh le instales el Remote.zip que ha subido linch
he conseguido que funcione el mando a distancia pero la sintonizadora no me la reconoce en ninguno de los casos, entro a tvheadend ip:9981 pero no detecta la sintonizadora he instalado las tres opciones de drivers que trae CoreELEC-S905.arm-9.0-devel-1537560336.img.gz reiniciando con cada una de ellas y no me la reconoce

no se que sintonizadora trae el gtc que es la que yo he probado, crei entender que la que trae por defecto era la tbs5520se no se si es esa.

gracias por adelantado
Entendiste mal la Gtc trae sintonizadora sony no hay drivers copilados en linux , la 5520se es una sintonizadora usb dvb car
Let me disagree with you, Android is a Linux system, it has a linux kernel, it depends on how system is built, on GTC it uses DVB API, so oscam works with it, drivers are there, and also firmware files for tuner, i will try to get root access and then search for them.
and let me STOP everybody!

Android is based on Linux
But is not he Linux you may know like Ubuntu, Linux Mint, Centos
so saying that you can not run on linux your android apps nor you can run known linux programs on Android

So ???
Well Google developers use Linux ONLY as part of the CORE, but they don't use the libraries and software that uses Linux distribution, that is WHY you do not find the "drivers"

As eumesmo pointed out it JUST is the KERNEL, and because is Linux is an open source Google can modify it as they please.
As PS4 does

That is why still learning. I have so many languages in my head, now old guy I do not know what to write on,
So to make you laugh I remember at the University making a line with punched cards and wait 3 days to them process in Fortran 4 and the computer lab was almost a whole building, what we now have a phone or a tablet

The Basic C, C+, Cobol Pascal all gone

Now leave me with my html, PHP, css, python my Ubuntu and Centos
Dont like Java nor Android but personal taste

My personal opinion the idea of this decoder is GREAT having iptv for one side, satellite and terrestrial for less than US $100
However technically the error as base this on Android and not completely on linux, again is my opinion

The other option ( just speaking out loud due I do not have the schematics( is do a partition and separate operating system leaving android on one side and the other look something compatible for tuner part. However I do not know is viable or not, or if it is worth it for the manufacturer start from zero.

My 2 cents
MarSat

User avatar
quark
Posts: 60
Joined: Wed Aug 22, 2018 7:16 pm

Re: Totally disillusioned customer

Post by quark »

Marsat wrote:
That is why still learning. I have so many languages in my head, now old guy I do not know what to write on,
So to make you laugh I remember at the University making a line with punched cards and wait 3 days to them process in Fortran 4 and the computer lab was almost a whole building, what we now have a phone or a tablet

The Basic C, C+, Cobol Pascal all gone

Now leave me with my html, PHP, css, python my Ubuntu and Centos
Dont like Java nor Android but personal taste

My personal opinion the idea of this decoder is GREAT having iptv for one side, satellite and terrestrial for less than US $100
However technically the error as base this on Android and not completely on linux, again is my opinion

The other option ( just speaking out loud due I do not have the schematics( is do a partition and separate operating system leaving android on one side and the other look something compatible for tuner part. However I do not know is viable or not, or if it is worth it for the manufacturer start from zero.

My 2 cents
MarSat
You sound a lot like me Marsat. I too punched and loaded cards back in the day and repaired the mainframes.

Your idea of multiple partitions is used in many enigma2 boxes. A 4GB box can have up to 4 different boot images loaded onto it at 1GB per image. Then you simply select which image you want to boot. The same thing should be possible with these android boxes since they have adequate memory. It actually is with a dual boot combo box currently on the market. It can be loaded with android and enigma2.

User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: Totally disillusioned customer

Post by Marsat »

eumesmo wrote: I’m not that old, and android to me is just theory, I know java, but never built any app for Android, I think drivers and kernel are Linux based, than there is the JAVA virtual machine to run android apps, file system is ext4?

I have a usb dvb-c tuner working on my enigma box, I think I could get it to work on coreelec with this box, I will give it a try as soon as I have time, and I will also root it to check the file system.
Beste regards
Eumesmo
Yes you are right
and that is the reason JAVA is been blocked and discontinued in most browser due vulnerabilities (hack) you can use JAVA anymore on Chrome Safari Opera.... Still in FF an old version of JAVA

Please post your findings
I am checking on the script BT03 finder in android apk. I opened up and reading now the scripts

mr_roba
Posts: 53
Joined: Mon Nov 28, 2016 7:58 pm

Re: Totally disillusioned customer

Post by mr_roba »

My patience is over. I bought xxxx to compare. After testing, I find that GTC's Andoid is noticeably faster. However, what is the most important - the application for watching TV is definitely better in xxxx.
Working EPG. Phenomenal editing of the channel list - I set a list in half an hour. Program recording works. I'm delighted. I gave GTC back to my daughter ...

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

espaun206 wrote:
linch wrote:Here the file easy for use for remote control with coreelec

Code: Select all

//mega.nz/#!gpg2lA7b!3A03aiudfuU95ua8iY5D_hXMsIOfw35pxo1phTSWchE  
instruction on how to put the 2 config files

Code: Select all

//discourse.coreelec.org/t/how-to-configure-ir-remote-control/31   
in this step I lose myself, as it would be

You must also create the following file /storage/.config/rc_maps.cfg with the following contents.

meson-ir * YOURMAPNAME
meson-ir * GTCKeyMap
The name of the file put into /storage/.config/rc_keymaps/

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

For who want put into a dual clean boot libreelec into an Micro SD i have open a thread to libreelec forum for partecipate.

Code: Select all

 hxxps://forum.libreelec.tv/thread/13488-librelec-freesat-gtc-s905d/ 
At the moment i have installed firmware
LibreELEC-S905.arm-8.2.5-Chroma.422.10bit
into the librelec forum thread you can find display drivers and remote.conf to install into the GTC.
Internal tuners are not supported ....you can play with external usb one.
Display drivers and remote files are working only on LibreELEC-S905.arm-8.2.5-Chroma.422.10bit firmware.
If freesat developers not solved the problems, libreelec is a very good alternative, it work stable and better than stock firmware.

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

espaun206 wrote:
linch wrote:For who want put into a dual clean boot libreelec into an Micro SD i have open a thread to libreelec forum for partecipate.

Code: Select all

 hxxps://forum.libreelec.tv/thread/13488-librelec-freesat-gtc-s905d/ 
At the moment i have installed firmware
LibreELEC-S905.arm-8.2.5-Chroma.422.10bit
into the librelec forum thread you can find display drivers and remote.conf to install into the GTC.
Internal tuners are not supported ....you can play with external usb one.
Display drivers and remote files are working only on LibreELEC-S905.arm-8.2.5-Chroma.422.10bit firmware.
If freesat developers not solved the problems, libreelec is a very good alternative, it work stable and better than stock firmware.
you could upload and share a copy of your image

I do not understand these steps


2- Unzip and copy folder into your GTC in /storage directory

3- chmod 755 to all file into the display folder

--------

2 --Copy the GTC Display_Driver folder, in the original storage directory android

Hi espaun,
answer to you on libreelec forum.
Regards

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

@espaun
you have a pm.

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

eumesmo wrote:watt i've found so far:


[ 17.749474@2] DVB: aml_dvb_probe: probe amlogic dvb driver
[ 17.749495@2] DVB: aml_dvb_probe: dmx rst ctl = ffffffc05e7c2c40
[ 17.749501@2] DVB: aml_dvb_probe: asyncfifo rst ctl = ffffffc05e7c28c0
[ 17.749506@2] DVB: aml_dvb_probe: ahbarb0 rst ctl = ffffffc05e7c2480
[ 17.749510@2] DVB: aml_dvb_probe: uparsertop rst ctl = ffffffc05e7c2e80
[ 17.749612@2] dvbdev: DVB: registering new adapter (amlogic-dvb)
[ 17.749614@2] DVB: aml_dvb_probe: Registered adpter: amlogic-dvb
[ 17.750267@2] Mali: Mali device driver loaded
[ 17.754889@1] DMX: async fifo 0 buf size 524288, flush size 262144
[ 17.754942@1] DMX: async fifo 1 buf size 524288, flush size 262144
[ 17.773614@1] DVB FE: Init AVL6862 frontend 0
[ 18.594714@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.594726@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.594777@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.594782@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.594833@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.594839@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.594845@1] i2c i2c-2: avl6862: i2c wr failed=-11 len=3
[ 18.594897@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.594902@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.594953@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.594958@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595008@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595013@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595019@1] i2c i2c-2: avl6862: i2c rd failed=-11 len=4
[ 18.595071@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595076@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595127@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595132@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595182@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595188@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595193@1] i2c i2c-2: avl6862: i2c wr failed=-11 len=3
[ 18.595244@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595249@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595300@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595306@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595356@1] i2c i2c-2: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 18.595362@1] i2c i2c-2: token 1, master_no(2) 300K addr 0x14
[ 18.595367@1] i2c i2c-2: avl6862: i2c rd failed=-11 len=4
[ 18.595372@1] i2c i2c-2: avl6862: attach failed reading id
[ 18.595382@1] DVB FE: avl6862_attach attach failed!!!



Driver is AVL6862.
This build could have a bug on driver, or a bug on i2c driver.

I will give it a another try after work!

Hi,
but this the output from wich image??

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

eumesmo wrote:
linch wrote: Hi,
but this the output from wich image??
From CoreELEC-S905.arm-8.95.4.3.img i'm looking for other versions, and updated drivers.
But your output depend from the firmware file dtb that you are using.
Which dtb have you installed ??
avl6862 are driver from wetek.
This is the piece of code from the original freesat firmware file

Code: Select all

dvbfe {
		compatible = "amlogic, dvbfe";
		dev_name = "dvbfe";
		dtv_demod0 = "cxd28xx";
		dtv_demod0_i2c_adap_id = <0x2>;
		dtv_demod0_i2c_addr = <0x6c>;
		dtv_demod0_reset_value = <0x0>;
		dtv_demod0_reset_gpio = <0x9 0x49 0x0>;
		fe0_dtv_demod = <0x0>;
		fe0_ts = <0x0>;
		fe0_dev = <0x0>;
	};
The demod will be cxd28xx sony.
I think you are going on a wrong direction.

linch
Posts: 126
Joined: Fri Sep 21, 2018 5:55 pm

Re: Totally disillusioned customer

Post by linch »

Hi to all,
for friends with libreelec / coreelec distribution installed on GTC can find oscam updates here
hxxp://www.streamboard.tv/wbb2/thread.php?threadid=45943
xx=tt
Regards

vergud
Posts: 96
Joined: Thu Aug 11, 2016 10:22 am
Location: Indonesia
Contact:

Re: Totally disillusioned customer

Post by vergud »

linch wrote:Hi to all,
for friends with libreelec / coreelec distribution installed on GTC can find oscam updates here
hxxp://www.streamboard.tv/wbb2/thread.php?threadid=45943
xx=tt
Regards
Is libreelec all running smoothly? dvb works fine?
please I want to try it but confused the steps
please give the tutorial clearly to me through video or writing clearly, may private message to me.
pleeeaaaseeee
I was tired of waiting for the new firm GTC which was uncertain and just imaginary

freesatv7
Posts: 82
Joined: Fri Feb 03, 2017 8:28 am

Re: Totally disillusioned customer

Post by freesatv7 »

espaun206 wrote:if I upgrade to v39 can I continue loading libreelec from sd?
Without being rooted?

RGG1
Posts: 237
Joined: Tue Nov 28, 2017 3:55 am

Re: Totally disillusioned customer

Post by RGG1 »

lord_ximer wrote:Hola, soy nuevo en el foro y tambien estoy muy desilusionado con este producto.
Compre este modelo pensando en mejorar, pues mi experiencia con modelos anteriores (v7 y v8 super) fue positiva. Es inexplicable que salga al mercado un producto nuevo aparentemente sin testear y que ni si quiera es capaz de igualar a modelos antiguos. Estas son mis quejas a mejorar:
-poder exportar la lista de canales a usb.
-poder ordenar los canales en grupo,no solo de uno en uno que y cuando lo colocas en otra posicion, que el resto de canales baje un puesto, y no cambie uno por otro como hace ahora
-poder cambiar el nombre de los grupos favoritos
-poder visionar los canales pulsando solo OK
-poder hacer busqueda de un solo transpordedor, y no de todo el satelite
-que la nueva busqueda, coloque los canales nuevos al final, y que no desordene la lista ya creada
-no funciona epg
-no funciona subtitulos
-cuando se encripta un canal aparece la palabra SCRAMBLED en la pantalla, y aunque el canal se desencripte, la palabra no desaparece de la pantalla.
-las aplicaciones no las he probado aun, pero leo por varios foros que fallan bastante

Resumiendo, es lamentable que saquen un producto al mercado en estas condiciones. Deberian haber testeado con varios usuarios expertos antes de hacerlo, y por supuesto, tenian que haber tenido como principal objetivo igualar los modelos ya existentes.....en definitivia, PROYECTO de buen decodificor y nada mas.

Solo espero que busquen soluciones rapidas a estos problemas y puedan contentarnos, o la perdida de clientes esta asegurada.
Animo equipo GTMEDIA !!!........a mejorar.
Hola,
Totalmente deacuerdo contigo. Lo único que si lo acabas de comprar, tienes que armarte de paciencia porque la cosa va muy despacio. Yo fui de l@s primer@s en comprar este deco hace más de un año y sigo esperando que se solucionen problemas. Sobre lo que dices de buscar los canales de un solo tp, sí se puede, no recuerdo el procedimiento porque lo pregunté ya hace tiempo, pero si buscas por el foro lo encontrarás, era muy fácil. El inconveniente que le encontré en su momento, es que cuando haces la búsqueda en un tp, de los canales que encuentra en ese tp, si ya tienes alguno en favoritos, te los quita de favoritos y tienes que volver a seleccionarlos como favoritos perdiendo la posición que tenía anteriormente en el grupo de favoritos.
Si tienes más de un satélite no puedes mezclar los canales de los satélites, sólo puedes ordenar cada satélite por separado.
El no poder exportar la lista de canales es algo que también me pasa, sale error code 2, esto ya se ha comentado por aquí en infinidad de ocasiones. Sin embargo hay gente a los que sí le funciona.
Cuando no te funcione o se quede bloqueado tienes que desenchufarlo de la corriente y volver a enchufarlo, no hay otra solución.
Por último no entiendo cómo han dejado de fabricar el V8super, seguro que tienen sus razones económicas y de mercado, pero era un deco que iba muy bien, siempre hablando de lo básico que se le puede pedir a un deco que es poder ver la tv, de los demás extras no digo nada.
Un saludo.

User avatar
ini54
Posts: 20
Joined: Tue Oct 30, 2018 11:29 am

Re: Totally disillusioned customer

Post by ini54 »

hola lord_ximer tienes toda la razón, yo también tengo el V8super y el GTC, y el V8 es mucho mas estable que el GTC, haber si las futuras actualizaciones se van corrigiendo todos los fallos que tienen que son muchos.


un saludo

User avatar
ini54
Posts: 20
Joined: Tue Oct 30, 2018 11:29 am

Re: Totally disillusioned customer

Post by ini54 »

eso es lo deseable que el próximo año 2019 se puedan solucionar algunos de los problemas que tiene este deco

un saludo

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”