We are flashing with Rs232 V9 prime cable
Moderators: admin, GTMedia Team
-
- Posts: 3
- Joined: Sun Nov 19, 2023 1:51 pm
We are flashing with Rs232 V9 prime cable
When inserting the software with the rs232 cable into the V9, it gave me an error message, maybe I'm not inserting the right file, please, which file goes, where can I download it, I need to restore it from the mars firmware to the ecam firmware.Thanks
- Attachments
-
- IMG_6355.jpeg (3.44 MiB) Viewed 951 times
Re: We are flashing with Rs232 V9 prime cable
On the V9 requires a higher quality RS232 cable
-
- Posts: 3
- Joined: Sun Nov 19, 2023 1:51 pm
Re: We are flashing with Rs232 V9 prime cable
The cable is from the old receiver which was repaired for V9 according to the procedure that exists in the forum.
-
- Posts: 3
- Joined: Sun Nov 19, 2023 1:51 pm
Re: We are flashing with Rs232 V9 prime cable
I'm not sure which file is in the one indicated below, I put the normal firmware there because that's fine?
- Attachments
-
- IMG_6367.jpeg (1.03 MiB) Viewed 931 times