V9 super powervu keys not working north america

GTMEDIA V9 super V9Prime

Moderators: admin, GTMedia Team

Post Reply
machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

V9 super powervu keys not working north america

Post by machteck »

just purchased a Freesat V9 Super loaded north america powervu keys will open some channels first time after scanning and loading channels takes 2 to 5 min to open change satellites or power off and back on and go back to the previous channel and they will not open. Thanks any help appreciated
Larry

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

No one have any information on this powervu problem?
Larry

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V9 super powervu keys not working north america

Post by Feralkiwi »

Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

Thanks. The problem is it takes to long for the channels to open. if you turn the receiver off and back on takes 5 to 20 min to open the channels after turning the receiver off the third time they will not open at all. I did look at the forum and down loaded the manual before i posted the thread. i have installing the keys on other receivers, first time i have had a problem.
P 0000 00 396844ez9914v520 example
p 0000 01 178844h339y8b417 example The first four numbers are always 0000 zeroes for the North American channels that i use how ever i don't know how the numbers roll works. There is several forums that have the North American channel keys including this one.Thanks again
Larry

tanka
Posts: 481
Joined: Sun Aug 21, 2016 4:35 pm

Re: V9 super powervu keys not working north america

Post by tanka »

The receiver did give all that problem about keys powervu biss to all users.Keep the v7 and v8 because v9 only problems for now.To delete keys same problem full of bugs.

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

I have contacted the factory since i bought it directly from them. Hope this is a firmware problem, if i get this issue resolved with the factory i will update. Thanks to every one for responding.
Larry

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

Does any one have a v9 Super that the powervu keys work ? i contacted the factory and after a few emails they informed me to send the unit back and would refund my money, i would like to fix this problem , is there any updates.
Larry

bernie
Posts: 46
Joined: Sun Feb 25, 2018 10:11 pm
Location: Canada

Re: V9 super powervu keys not working north america

Post by bernie »

machteck wrote:Does any one have a v9 Super that the powervu keys work ? i contacted the factory and after a few emails they informed me to send the unit back and would refund my money, i would like to fix this problem , is there any updates.
powervu keys for my V9 do not work at all.
several 3M dishes, V9 Super, V7HD, V7SHD, V8 Super

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

i don't think the keys are working on any of the V9 units .
Larry

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V9 super powervu keys not working north america

Post by cpr43 »

Softcam Modification

You need to have working 00 and 01 Power Vu ECM keys for TP. You need to write service id for every channel but in the old Power Vu way. If service id is 1025 , you need to write as 0251. Every sat will need to have a different 4 number code.

P 00010251 00 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P 00010251 01 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e

P= Power Vu
0001= First satellite in the softcam file
0251= Service id (modified as mentioned before)
00, 01
xxxxxxxxxxxxxxxx= Power vU ecm KEYS
Channel Name and Sat location

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

Yes u are right do u have a v9 super that is working with north american keys ?
Larry

bernie
Posts: 46
Joined: Sun Feb 25, 2018 10:11 pm
Location: Canada

Re: V9 super powervu keys not working north america

Post by bernie »

thanks cpr43 I will try that. does the ecm key have to be 16 digits or 14?
several 3M dishes, V9 Super, V7HD, V7SHD, V8 Super

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V9 super powervu keys not working north america

Post by cpr43 »

bernie wrote:thanks cpr43 I will try that. does the ecm key have to be 16 digits or 14?
14 (16 when adding 00 or 01)

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: V9 super powervu keys not working north america

Post by machteck »

cpr43 thanks i didn't mean to sound ungrateful for your information. I contacted the factory sales lady that i bought the unit from she contacted the engineer with this problem so she said, after 14 emails she advised me to return and they would refund money. She did not say the unit was defective or a firmware problem. Thanks again.
Larry

spok2010
Posts: 103
Joined: Fri Aug 12, 2016 1:15 pm

Re: V9 super powervu keys not working north america

Post by spok2010 »

Not working so far. Will anybody take care of this?

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V9 super powervu keys not working north america

Post by cpr43 »

spok2010 wrote:
Sun Apr 12, 2020 9:47 pm
Not working so far. Will anybody take care of this?
As your last choice start from scratch. Backup channel DB. Re-install firmware, do factory reset before and after. Re-install DB and try

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V9 super powervu keys not working north america

Post by cpr43 »

spok2010 wrote:
Sun Apr 12, 2020 9:47 pm
Not working so far. Will anybody take care of this?
@spok2010

Try this process reported by another member:

Make a backup or dump of your Channels/Sats DB.

1) Rename your firmware to .abs
2) Format your USB flash disk in the system as FAT32 file
3) Copy the downloaded rename file to your flash disk
4) Turn the receiver OFF WITH THE ON / OFF SWITCH on the back
5) Insert the USB flash disk into the receiver
6) Turn on the receiver
7) At the SAME TIME press the MENU boton real quick on the Remote Control 10 times

8) select START and OK
8) EVERYTHING DONE, the receiver will now boots normally.

Note:
Load your Softcam.key file FIRST, then the Channels/Sats DB

spok2010
Posts: 103
Joined: Fri Aug 12, 2016 1:15 pm

Re: V9 super powervu keys not working north america

Post by spok2010 »

Hi,

I've followed all your checklist step by step. However, the V9 Super only saved the Tandberg keys. The other ones continued in blank space. Then, I've exported the softcam e verified that in the new file only Tandberg appears organized just like in the original file. The other ones came all mixed, a great mess.

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: V9 super powervu keys not working north america

Post by cpr43 »

spok2010 wrote:
Mon Apr 13, 2020 10:04 pm
Hi,

I've followed all your checklist step by step. However, the V9 Super only saved the Tandberg keys. The other ones continued in blank space. Then, I've exported the softcam e verified that in the new file only Tandberg appears organized just like in the original file. The other ones came all mixed, a great mess.
So sorry, I really tried hard to help. I asked so many time to GT Media to send me a V9 super so I can help members like you but didnt get one. I have tried all my tricks based on my experienced so can't help further. Sorry,

spok2010
Posts: 103
Joined: Fri Aug 12, 2016 1:15 pm

Re: V9 super powervu keys not working north america

Post by spok2010 »

Oh no, my dear friend, no need to apologize. I am a witness to your goodwill. Thanks so much for your kind help. This is my third Freesat receiver, but it seems to me that Freesat is not worried about our sufferings.

Post Reply

Return to “GTMEDIA V9 SERIES”