V9 Super still have problems at blind scan.
succesess rate: PLSN=off
C-Band almost 100% (OK)
Ku band 0% to 80% ( too bad)
Using 3 mode scanned :Blind, Accurate Scan, even Preset Scan
Depending on the satellite, 100% fails and the satellite has no channel list.
V8 Super worked fine.
to Freesat Engineer Please resolve this problem promptly.
Problem of V9 Super Blind Scan
Moderators: admin, GTMedia Team
Re: Problem of V9 Super Blind Scan
Same times before start scan .Need to scan one tp did have good signal.Then star the blind scan.Because if the receiver are on the tp not have signal did fail the scan.Did have to repair that.
Re: Problem of V9 Super Blind Scan
Thank you tanka,tanka wrote:Same times before start scan .Need to scan one tp did have good signal.Then star the blind scan.Because if the receiver are on the tp not have signal did fail the scan.Did have to repair that.
Most of the times of some satellites are fail to blind scan when I tried.
This is a serious disadvantage of V9 Super.
Still, F / W is not familiar.
I hope that fix this issue as soon as possible.
Re: Problem of V9 Super Blind Scan
Hi think you need to check on LNB freq type whether its 9750 - 10600 , 9750 -10750 when you or if LNB is unicable (smart lnb) if you scan using wrongly discribtion scan will not successful.
Re: Problem of V9 Super Blind Scan
I don't know if this helps, but I scanned the satellites with lower resolution setting, changed from 1080p to a lower resolution, and the receiver found more channels. It might have been bad weather that prevented from finding them before, but I'm not sure. If this really works please let me know.Xsat wrote: ↑Sun Apr 01, 2018 4:38 amV9 Super still have problems at blind scan.
succesess rate: PLSN=off
C-Band almost 100% (OK)
Ku band 0% to 80% ( too bad)
Using 3 mode scanned :Blind, Accurate Scan, even Preset Scan
Depending on the satellite, 100% fails and the satellite has no channel list.
V8 Super worked fine.
to Freesat Engineer Please resolve this problem promptly.
When adding more satellites to the satellite list, the correct type of LNB has to be set. I forgot the first time when I searched channels and a lot of them were not found that time.
Re: Problem of V9 Super Blind Scan
Please try to Network Search "OFF".
Re: Problem of V9 Super Blind Scan
Cuando se baja un poco la resolución, el scan es más fácil