Unable to access channel after Auto Search

GTMEDIA V9 super V9Prime

Moderators: admin, GTMedia Team

Post Reply
al_v_i_n
Posts: 1
Joined: Tue Jul 03, 2018 1:15 pm

Unable to access channel after Auto Search

Post by al_v_i_n »

Hi,

I'm using FREE SAT V9 Pro. After an Auto Search to update the channel for World Cup, I couldn't watch some channels that were originally able to view.

May I know what are some steps to try?

The Auto Search settings are as below

Frequency: 135.500 MHz
Symbol Rate: 6.090MBaud
Modulation: QAM256
FTA Only: No

Is there anything wrong?

User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: Unable to access channel after Auto Search

Post by Marsat »

al_v_i_n wrote:Hi,

I'm using FREE SAT V9 Pro. After an Auto Search to update the channel for World Cup, I couldn't watch some channels that were originally able to view.

May I know what are some steps to try?

The Auto Search settings are as below

Frequency: 135.500 MHz
Symbol Rate: 6.090MBaud
Modulation: QAM256
FTA Only: No

Is there anything wrong?

I did encounter a similar problem.
If there are TP and channels downloaded already Blind scan does not work. When I click SEARCH it to auto scan and search only one tp and is not "check out" (marked). so what I do is delete all tps and scan again blind.

What you can do if you do not want to try my drastic measure, is scan one by one each TP

Post Reply

Return to “GTMEDIA V9 SERIES”