Hi,
I'm using FREE SAT V9 Pro. After an Auto Search to update the channel for World Cup, I couldn't watch some channels that were originally able to view.
May I know what are some steps to try?
The Auto Search settings are as below
Frequency: 135.500 MHz
Symbol Rate: 6.090MBaud
Modulation: QAM256
FTA Only: No
Is there anything wrong?
Unable to access channel after Auto Search
Moderators: admin, GTMedia Team
Re: Unable to access channel after Auto Search
al_v_i_n wrote:Hi,
I'm using FREE SAT V9 Pro. After an Auto Search to update the channel for World Cup, I couldn't watch some channels that were originally able to view.
May I know what are some steps to try?
The Auto Search settings are as below
Frequency: 135.500 MHz
Symbol Rate: 6.090MBaud
Modulation: QAM256
FTA Only: No
Is there anything wrong?
I did encounter a similar problem.
If there are TP and channels downloaded already Blind scan does not work. When I click SEARCH it to auto scan and search only one tp and is not "check out" (marked). so what I do is delete all tps and scan again blind.
What you can do if you do not want to try my drastic measure, is scan one by one each TP