Updating IPTV list causes client ban

[Cretu]

Hello,

With a iFire-II with the latest firmware, when updating the IPTV list from a Xtream server, right after the update procedure ends, the device throws a "Login Server Error [-1]", and that is because the server becomes unresponsive (bans me for around 15 minutes).

Why is this happening? Well, obviously the iFire-II is doing some kind of aggresive list updating/checking (too many concurrent connections when trying to check "Live" channels?) and that triggers some kind of anti-flood protection on the Xtream server, which responds banning the client's IP for a few minutes.

I have tested this on a various server and it happens almost the same: after updating, the server refuses connections (= temporary ban).

GTMedia Team must rewrite the updating algorithm, or otherwise, this receiver is almost useless for using on most of IPTV servers. As simple as that.

[Tom.w]

thank you very much for your feedback.
we will check this flow.
and if you can ,please also PM us a xtream account to us for testing.

Best Regards

[blasta]

I have the same problem i got a ban of 2hours

[henry74]

Hello,

With a iFire-II with the latest firmware, when updating the IPTV list from a Xtream server, right after the update procedure ends, the device throws a "Login Server Error [-1]", and that is because the server becomes unresponsive (bans me for around 15 minutes).

Why is this happening? Well, obviously the iFire-II is doing some kind of aggresive list updating/checking (too many concurrent connections when trying to check "Live" channels?) and that triggers some kind of anti-flood protection on the Xtream server, which responds banning the client's IP for a few minutes.

I have tested this on a various server and it happens almost the same: after updating, the server refuses connections (= temporary ban).

GTMedia Team must rewrite the updating algorithm, or otherwise, this receiver is almost useless for using on most of IPTV servers. As simple as that.

I hope this message finds you well. I wanted to share my experience with the latest iFire-II firmware update, particularly related to updating the IPTV list from Xtream servers.

Following the update, the device encounters a "Login Server Error [-1]," potentially due to an aggressive list updating/checking process. This seems to trigger the Xtream server's anti-flood protection, leading to a temporary ban.

I'm genuinely excited about the iFire-II's potential, but I believe refining the updating algorithm could make a significant difference. By addressing this, the device could become even more compatible and user-friendly across various IPTV servers.

Your attention to this matter and potential improvements would greatly enhance the overall user experience. I'm looking forward to your response and any insights you might have.

[jalpango]

That's also because tjey have a differnt understanding of stalker. Tjey only think xtream is stalker whereas stalker is different. I have been following gtmedia products for many years and waiting them to understand stalker propoerly so that I can buy gtmedia boxes. These are good devices but lack on software part. If they need to understand stalker they need to understand how mag boxes work, play with their api and make their boxes or apk compatible with it.
They day they do it, I will be their bulk buyer.

[Coyote]

Tengo el mismo problema al introducir los datos en xtrean carga al cien la lista de canales. Y al llegar al 100% da el problema login server error 1. Y esta línea queda bloqueada durante 15 minutos en todos los dispositivos y en cualquier aplicación. Luego durante quince minutos aproximadamente no se puede ver esta línea en ningún dispositivo donde antes se veía como que el servidor ya rechaza cualquier conexión durante 15 minutos en otro dispositivos android que no dan el error ese. El problema es simplemente del gmediafire 2. Cualquier Android con otra aplicación de IPTV funciona correctamente con los mismos datos de xtream. Pero como digo al fallar en el iFire 2 la conexión durante quince minutos no se puede ver nada en ningún dispositivo

[Coyote]

He encontrado una solución para la gente que le da el login server error 1 en el gtmedia ifire 2. La solución es la siguiente nos metemos en menú cuenta y le damos al botón info para actualizar actualiza el 100% y luego da el típico error 1. En este momento apagamos el gtmedia i fire 2 de la corriente durante una hora. A la hora lo volvemos a enchufar y ya están todos los canales que se ven. Creo que no se nos ocurra darle al botón info para actualizar los canales porque da otra vez el típico error 1. Cuando queramos actualizar los canales nos metemos en menú cuenta le damos al botón info pero esto lo hacemos por la noche cuando nos vayamos a dormir porque apagamos así el gtmedia y fire 2 de la corriente y al día siguiente ya tenemos los canales funcionando

[rascayu]

Hola
Yo he tenido el problemas de Login server Error (-1) después de mucho trastear , he cambiado el DNS del aparato y me ha funcionado.

[rednaxelaochoa]

como se cambia el dns del V8X

[CAJE]

como se cambia el dns del V8X

Solo lo puedes hacer en el V8X si lo tienes conectado a Ethernet

[rednaxelaochoa]

tengo una lista IPTV y al tratar de reproducir me dice error code=1 y me dicen que debo cambiar el dns para poder ver los canales, y tengo deco Mars V8X...

[CAJE]

tengo una lista IPTV y al tratar de reproducir me dice error code=1 y me dicen que debo cambiar el dns para poder ver los canales, y tengo deco Ma.s V8X...

El error es la URL bloqueada, no siempre cambiar las DNS funciona