Hello,
today i set up my alu dish 95cm/multifeed 4 LNB with sat V8 finder and i must say everything went fine, never set up dish so fast and quickly as now.
First i try each single LNB to find and test strength of signal and after that through switch 4/1, DiSEqC 1.0 and works perfect .
So i have questions about signal level, what is more important, i know both but what is more signal intensity or signal quality?
Signal level (Intensity/Quality)
Moderators: admin, GTMedia Team
- norrinraddhr
- Posts: 28
- Joined: Tue Jun 12, 2018 2:17 pm
- Location: Croatia
Signal level (Intensity/Quality)
- Attachments
-
- DSC_0019.JPG (254.06 KiB) Viewed 2117 times
Re: Signal level (Intensity/Quality)
i find on power view channels ,quality is more important ....the bottom bar
- norrinraddhr
- Posts: 28
- Joined: Tue Jun 12, 2018 2:17 pm
- Location: Croatia
Re: Signal level (Intensity/Quality)
Thanks Marantz,
I found something in meantime but is good to know.
Some additional question...is it possible to make signal bars larger for view on the screen and how?
I found something in meantime but is good to know.
Some additional question...is it possible to make signal bars larger for view on the screen and how?
- norrinraddhr
- Posts: 28
- Joined: Tue Jun 12, 2018 2:17 pm
- Location: Croatia
Re: Signal level (Intensity/Quality)
Today some fine adjustment.
The same TP, the same satellite.
The same TP, the same satellite.
- Attachments
-
- DSC_0055.JPG (180.07 KiB) Viewed 2084 times