How to open bootloader, boot from SD

GTMEDIA_GTX COMBO/GTX Twin/GTCOMBO /GTC /GTS /GTS-PRO /GTT2

Moderators: admin, nzl229, GTMedia Team

Post Reply
GIJoe
Posts: 4
Joined: Fri Mar 09, 2018 8:03 am

How to open bootloader, boot from SD

Post by GIJoe »

Hi, i would like to try xxxxxxxxxc, the DVB app is terrible, ultra slow, freezing... etc (my old ali sat box x3 faster :( )
Thanks for you tips...

kyca
Posts: 20
Joined: Mon May 29, 2017 9:43 am

Re: How to open bootloader, boot from SD

Post by kyca »

you must create a empty update.zip archive on usb drive, connect it to device and run update from file.

I tried to boot from USB and I was testing LibreElect with KODI, but remote control and DVB-S not working

GIJoe
Posts: 4
Joined: Fri Mar 09, 2018 8:03 am

Re: How to open bootloader, boot from SD

Post by GIJoe »

Dear kyca

1. Can you explain for me step by step, how to start LE on the box?
so i create an empyt update.zip on usb drive, connected it reboot, and nothing happened...than i go to recovery menu try to start it
but nothing happend again :(

2 What kind of LE version do you test it? I would like to test xxxxxxxxxxxxxx wetek2 play ver...

thx!

kyca
Posts: 20
Joined: Mon May 29, 2017 9:43 am

Re: How to open bootloader, boot from SD

Post by kyca »

First, createxxxxx on usb drive.
Then, create archive named update.zip and copy to usb drive.
Next, You must run update app in Freesat GTC, and select update from file 'update.zip'

This cause reset and boot from usb directly

update.zip must by a archive without any files.

Look at this -

LibreElect works very fast, but I can't run DVB-S tuner on Kodi / LibreElec

Please be carefull and must looking for software for Amlogic S905D processor

GIJoe
Posts: 4
Joined: Fri Mar 09, 2018 8:03 am

Re: How to open bootloader, boot from SD

Post by GIJoe »

hmm, i tired it, > failed to map a file... :( so no boot from sd, or udisk

Hanilog
Posts: 3
Joined: Fri Mar 16, 2018 10:20 am

Re: How to open bootloader, boot from SD

Post by Hanilog »

Hallo
I can help you and i can send you the TWRP (teamwin) For freesat gtc.
Answer me with private message

GIJoe
Posts: 4
Joined: Fri Mar 09, 2018 8:03 am

Re: How to open bootloader, boot from SD

Post by GIJoe »

Hanilog wrote:Hallo
I can help you and i can send you the TWRP (teamwin) For freesat gtc.
Answer me with private message
So can i boot from sd card?

Or just the same with Terminal Emulator

su
svc power reboot recovery

thx

Hanilog
Posts: 3
Joined: Fri Mar 16, 2018 10:20 am

Re: How to open bootloader, boot from SD

Post by Hanilog »

Yes from sd card

azboxlibre
Posts: 18
Joined: Thu Mar 01, 2018 3:48 pm

Re: How to open bootloader, boot from SD

Post by azboxlibre »

kyca wrote:First, create xxxx on usb drive.
Then, create archive named update.zip and copy to usb drive.
Next, You must run update app in Freesat GTC, and select update from file 'update.zip'

This cause reset and boot from usb directly

update.zip must by a archive without any files.

Look at this - https://www.youtube.com/watch?v=VOp5Q-YLjIQ

xxxxx works very fast, but I can't run DVB-S tuner on Kodi / LibreElec

Please be carefull and must looking for software for Amlogic S905D processor
DVB-T and DVC works not libreelec ???

azboxlibre
Posts: 18
Joined: Thu Mar 01, 2018 3:48 pm

Re: How to open bootloader, boot from SD

Post by azboxlibre »

This firmwares not works? = https://forum.libreelec.tv/thread/9759- ... box-guide/.

How with xxxx??? Do you dare boot through sdcard without performing an update using app "reboot with xxx inserting dvb file in sdcard?

Post Reply

Return to “GTMEDIA GT SERIES (Android DVB & IPTV BOX)”