How to open bootloader, boot from SD
Moderators: admin, nzl229, GTMedia Team
How to open bootloader, boot from SD
Hi, i would like to try xxxxxxxxxc, the DVB app is terrible, ultra slow, freezing... etc (my old ali sat box x3 faster )
Thanks for you tips...
Thanks for you tips...
Re: How to open bootloader, boot from SD
you must create a empty update.zip archive on usb drive, connect it to device and run update from file.
I tried to boot from USB and I was testing LibreElect with KODI, but remote control and DVB-S not working
I tried to boot from USB and I was testing LibreElect with KODI, but remote control and DVB-S not working
Re: How to open bootloader, boot from SD
Dear kyca
1. Can you explain for me step by step, how to start LE on the box?
so i create an empyt update.zip on usb drive, connected it reboot, and nothing happened...than i go to recovery menu try to start it
but nothing happend again
2 What kind of LE version do you test it? I would like to test xxxxxxxxxxxxxx wetek2 play ver...
thx!
1. Can you explain for me step by step, how to start LE on the box?
so i create an empyt update.zip on usb drive, connected it reboot, and nothing happened...than i go to recovery menu try to start it
but nothing happend again
2 What kind of LE version do you test it? I would like to test xxxxxxxxxxxxxx wetek2 play ver...
thx!
Re: How to open bootloader, boot from SD
First, createxxxxx on usb drive.
Then, create archive named update.zip and copy to usb drive.
Next, You must run update app in Freesat GTC, and select update from file 'update.zip'
This cause reset and boot from usb directly
update.zip must by a archive without any files.
Look at this -
LibreElect works very fast, but I can't run DVB-S tuner on Kodi / LibreElec
Please be carefull and must looking for software for Amlogic S905D processor
Then, create archive named update.zip and copy to usb drive.
Next, You must run update app in Freesat GTC, and select update from file 'update.zip'
This cause reset and boot from usb directly
update.zip must by a archive without any files.
Look at this -
LibreElect works very fast, but I can't run DVB-S tuner on Kodi / LibreElec
Please be carefull and must looking for software for Amlogic S905D processor
Re: How to open bootloader, boot from SD
hmm, i tired it, > failed to map a file... so no boot from sd, or udisk
Re: How to open bootloader, boot from SD
Hallo
I can help you and i can send you the TWRP (teamwin) For freesat gtc.
Answer me with private message
I can help you and i can send you the TWRP (teamwin) For freesat gtc.
Answer me with private message
Re: How to open bootloader, boot from SD
So can i boot from sd card?Hanilog wrote:Hallo
I can help you and i can send you the TWRP (teamwin) For freesat gtc.
Answer me with private message
Or just the same with Terminal Emulator
su
svc power reboot recovery
thx
Re: How to open bootloader, boot from SD
Yes from sd card
-
- Posts: 18
- Joined: Thu Mar 01, 2018 3:48 pm
Re: How to open bootloader, boot from SD
DVB-T and DVC works not libreelec ???kyca wrote:First, create xxxx on usb drive.
Then, create archive named update.zip and copy to usb drive.
Next, You must run update app in Freesat GTC, and select update from file 'update.zip'
This cause reset and boot from usb directly
update.zip must by a archive without any files.
Look at this - https://www.youtube.com/watch?v=VOp5Q-YLjIQ
xxxxx works very fast, but I can't run DVB-S tuner on Kodi / LibreElec
Please be carefull and must looking for software for Amlogic S905D processor
-
- Posts: 18
- Joined: Thu Mar 01, 2018 3:48 pm
Re: How to open bootloader, boot from SD
This firmwares not works? = https://forum.libreelec.tv/thread/9759- ... box-guide/.
How with xxxx??? Do you dare boot through sdcard without performing an update using app "reboot with xxx inserting dvb file in sdcard?
How with xxxx??? Do you dare boot through sdcard without performing an update using app "reboot with xxx inserting dvb file in sdcard?