V9 super powervu keys not working north america
Moderators: admin, GTMedia Team
V9 super powervu keys not working north america
just purchased a Freesat V9 Super loaded north america powervu keys will open some channels first time after scanning and loading channels takes 2 to 5 min to open change satellites or power off and back on and go back to the previous channel and they will not open. Thanks any help appreciated
Larry
Re: V9 super powervu keys not working north america
No one have any information on this powervu problem?
Larry
Re: V9 super powervu keys not working north america
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V9 super powervu keys not working north america
Thanks. The problem is it takes to long for the channels to open. if you turn the receiver off and back on takes 5 to 20 min to open the channels after turning the receiver off the third time they will not open at all. I did look at the forum and down loaded the manual before i posted the thread. i have installing the keys on other receivers, first time i have had a problem.
P 0000 00 396844ez9914v520 example
p 0000 01 178844h339y8b417 example The first four numbers are always 0000 zeroes for the North American channels that i use how ever i don't know how the numbers roll works. There is several forums that have the North American channel keys including this one.Thanks again
P 0000 00 396844ez9914v520 example
p 0000 01 178844h339y8b417 example The first four numbers are always 0000 zeroes for the North American channels that i use how ever i don't know how the numbers roll works. There is several forums that have the North American channel keys including this one.Thanks again
Larry
Re: V9 super powervu keys not working north america
The receiver did give all that problem about keys powervu biss to all users.Keep the v7 and v8 because v9 only problems for now.To delete keys same problem full of bugs.
Re: V9 super powervu keys not working north america
I have contacted the factory since i bought it directly from them. Hope this is a firmware problem, if i get this issue resolved with the factory i will update. Thanks to every one for responding.
Larry
Re: V9 super powervu keys not working north america
Does any one have a v9 Super that the powervu keys work ? i contacted the factory and after a few emails they informed me to send the unit back and would refund my money, i would like to fix this problem , is there any updates.
Larry
Re: V9 super powervu keys not working north america
powervu keys for my V9 do not work at all.machteck wrote:Does any one have a v9 Super that the powervu keys work ? i contacted the factory and after a few emails they informed me to send the unit back and would refund my money, i would like to fix this problem , is there any updates.
several 3M dishes, V9 Super, V7HD, V7SHD, V8 Super
Re: V9 super powervu keys not working north america
i don't think the keys are working on any of the V9 units .
Larry
Re: V9 super powervu keys not working north america
Softcam Modification
You need to have working 00 and 01 Power Vu ECM keys for TP. You need to write service id for every channel but in the old Power Vu way. If service id is 1025 , you need to write as 0251. Every sat will need to have a different 4 number code.
P 00010251 00 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P 00010251 01 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P= Power Vu
0001= First satellite in the softcam file
0251= Service id (modified as mentioned before)
00, 01
xxxxxxxxxxxxxxxx= Power vU ecm KEYS
Channel Name and Sat location
You need to have working 00 and 01 Power Vu ECM keys for TP. You need to write service id for every channel but in the old Power Vu way. If service id is 1025 , you need to write as 0251. Every sat will need to have a different 4 number code.
P 00010251 00 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P 00010251 01 xxxxxxxxxxxxxxxx ; Ant 3, 19.2e
P= Power Vu
0001= First satellite in the softcam file
0251= Service id (modified as mentioned before)
00, 01
xxxxxxxxxxxxxxxx= Power vU ecm KEYS
Channel Name and Sat location
Re: V9 super powervu keys not working north america
Yes u are right do u have a v9 super that is working with north american keys ?
Larry
Re: V9 super powervu keys not working north america
thanks cpr43 I will try that. does the ecm key have to be 16 digits or 14?
several 3M dishes, V9 Super, V7HD, V7SHD, V8 Super
Re: V9 super powervu keys not working north america
14 (16 when adding 00 or 01)bernie wrote:thanks cpr43 I will try that. does the ecm key have to be 16 digits or 14?
Re: V9 super powervu keys not working north america
cpr43 thanks i didn't mean to sound ungrateful for your information. I contacted the factory sales lady that i bought the unit from she contacted the engineer with this problem so she said, after 14 emails she advised me to return and they would refund money. She did not say the unit was defective or a firmware problem. Thanks again.
Larry
Re: V9 super powervu keys not working north america
Not working so far. Will anybody take care of this?
Re: V9 super powervu keys not working north america
@spok2010
Try this process reported by another member:
Make a backup or dump of your Channels/Sats DB.
1) Rename your firmware to .abs
2) Format your USB flash disk in the system as FAT32 file
3) Copy the downloaded rename file to your flash disk
4) Turn the receiver OFF WITH THE ON / OFF SWITCH on the back
5) Insert the USB flash disk into the receiver
6) Turn on the receiver
7) At the SAME TIME press the MENU boton real quick on the Remote Control 10 times
8) select START and OK
8) EVERYTHING DONE, the receiver will now boots normally.
Note:
Load your Softcam.key file FIRST, then the Channels/Sats DB
Re: V9 super powervu keys not working north america
Hi,
I've followed all your checklist step by step. However, the V9 Super only saved the Tandberg keys. The other ones continued in blank space. Then, I've exported the softcam e verified that in the new file only Tandberg appears organized just like in the original file. The other ones came all mixed, a great mess.
I've followed all your checklist step by step. However, the V9 Super only saved the Tandberg keys. The other ones continued in blank space. Then, I've exported the softcam e verified that in the new file only Tandberg appears organized just like in the original file. The other ones came all mixed, a great mess.
Re: V9 super powervu keys not working north america
So sorry, I really tried hard to help. I asked so many time to GT Media to send me a V9 super so I can help members like you but didnt get one. I have tried all my tricks based on my experienced so can't help further. Sorry,spok2010 wrote: ↑Mon Apr 13, 2020 10:04 pmHi,
I've followed all your checklist step by step. However, the V9 Super only saved the Tandberg keys. The other ones continued in blank space. Then, I've exported the softcam e verified that in the new file only Tandberg appears organized just like in the original file. The other ones came all mixed, a great mess.
Re: V9 super powervu keys not working north america
Oh no, my dear friend, no need to apologize. I am a witness to your goodwill. Thanks so much for your kind help. This is my third Freesat receiver, but it seems to me that Freesat is not worried about our sufferings.