A F N G16 on Mini Bud !
Moderators: admin, GTMedia Team
A F N G16 on Mini Bud !
Ok,been wabting to try C Band on my 4 ft. (1.2m ?) CM Dish.Finally got around to yrying it.Getting A F N Mux at 4025 & LEASEA Chans is about all,but was AMAZED I COULD GET THAT ! No luck on 3900 Mux.
Check out pics!
A F N AT 93% Sig & 60% Quality!
BTW: Screen shows AMC-8 for Sat,pay no attention to that,just used it to Scan Chans in
Actually on G16,& V7 Max rolled keys even though on diff Sat Name !
Check out pics!
A F N AT 93% Sig & 60% Quality!
BTW: Screen shows AMC-8 for Sat,pay no attention to that,just used it to Scan Chans in
Actually on G16,& V7 Max rolled keys even though on diff Sat Name !
- Attachments
-
- 0824181150-1600x1200.jpg (299.94 KiB) Viewed 6155 times
-
- 0824181149b-1600x1200.jpg (458.73 KiB) Viewed 6155 times
-
- 0824181149a-1600x1200.jpg (752.49 KiB) Viewed 6155 times
Re: A F N G16 on Mini Bud !
very impressive.
you are a true fan of this.
You worked up .
good lnb holder.
good job
congratulations
i have LEASEA Chans only with a 5 foot.
you are a true fan of this.
You worked up .
good lnb holder.
good job
congratulations
i have LEASEA Chans only with a 5 foot.
La mente es como un paracaídas, no sirve si no se abre...
Re: A F N G16 on Mini Bud !
I was going to ask you a lot of questions, but finally my V7 just fired up on NSS 9 12:59 australian time happy now down here only get A F N DTS(direct to sailer) 3 channels prime, news and sports with a 10 foot disc c-band
Re: A F N G16 on Mini Bud !
You should add a conical scalar. Your signal will increase. I get g17 cw, fox mux on 3820, jewelry tv, byu, classic arts, sometimes univision, a few other muxes but can’t get them to open. Here’s a pic of my setup.
- Attachments
-
- 8E2CAAA7-6465-40A9-8F75-A002843FD7F5.jpeg (3.26 MiB) Viewed 6089 times
Re: A F N G16 on Mini Bud !
but seems you are aiming to the BMW right there .etlam34 wrote:You should add a conical scalar. Your signal will increase. I get g17 cw, fox mux on 3820, jewelry tv, byu, classic arts, sometimes univision, a few other muxes but can’t get them to open. Here’s a pic of my setup.
WOW what are you pointing at so vertical the dish. I had that at 30W
Theoretically you do not need a scalar cone. practically he may have listed to me
Will increase signal ? Yes
Will be a pain in the rear to adjust. You have no idea
Many friends and also technicians ask me if that works I said I never tried in formula it should work, The reason that many of you have no access to many stuff that for us is just drive 20 miles
But if you do not have the money or the ways to get a scalar cone. Guys...make it? Use an old aluminum shade from a street light or use Foil and a couple of wire hangers
Re: A F N G16 on Mini Bud !
My Longitude is 85.9.Latitude 31.8.That explains the positioning.
If u notice in pic,there really is not enough room for the big scaler.Also can position LNBF so much better without it
Prob have another 1.2m Primestar Dish,may set up later.But gotta order more LNBF'S,think that was my last one.
If u notice in pic,there really is not enough room for the big scaler.Also can position LNBF so much better without it
Prob have another 1.2m Primestar Dish,may set up later.But gotta order more LNBF'S,think that was my last one.
Re: A F N G16 on Mini Bud !
I must confess,the Bracket is actually a 2" Plumbing Pipe Hanger from Lowe's!
I am a Plumber/Electrician btw....
I am a Plumber/Electrician btw....
Re: A F N G16 on Mini Bud !
You can order them from wish. They take a long time to arrive though. I’m in canada that’s why my dishes are so vertical. My geosatpro 36” aimed on 125w for pbs is almost aiming at the ground!
- Attachments
-
- 9F07CA17-5641-4A4F-90E9-5A31E9410E31.jpeg (1.54 MiB) Viewed 6043 times
Re: A F N G16 on Mini Bud !
Yup,offset Dishes are always pointing 22 or more degrees towards the ground than Prime Focus Dishes...
Re: A F N G16 on Mini Bud !
that's why you're a true fta fanskideric wrote:I must confess,the Bracket is actually a 2" Plumbing Pipe Hanger from Lowe's!
I am a Plumber/Electrician btw....
because you look for solutions with what you have.
La mente es como un paracaídas, no sirve si no se abre...
Re: A F N G16 on Mini Bud !
Marsat wrote:etlam34 wrote:You should add a conical scalar. Your signal will increase.
Theoretically you do not need a scalar cone. practically he may have listed to me
Will increase signal ? Yes
Will be a pain in the rear to adjust. You have no idea
Many friends and also technicians ask me if that works I said I never tried in formula it should work, The reason that many of you have no access to many stuff that for us is just drive 20 miles
But if you do not have the money or the ways to get a scalar cone. Guys...make it? Use an old aluminum shade from a street light or use Foil and a couple of wire hangers
" Use an old aluminum shade from a street light or use Foil and a couple of wire hangers" ....Marsat"
that helps.
the signal increases
but buying a blue conical scalar is the best option.
I have tried both.
important..*****************
The conical scalar is recommended for antennas off sets
La mente es como un paracaídas, no sirve si no se abre...
Re: A F N G16 on Mini Bud !
Cool that you got it running on a 4 footer.
I have a 4 footer, but haven't gotten around to putting it up. Not sure what I want to use it for; the only satellites I don't have covered with my motorized dishesare probably too far east or west for a 4 footer to pull in anything but the strongest transponders, if even them.
I have a 4 footer, but haven't gotten around to putting it up. Not sure what I want to use it for; the only satellites I don't have covered with my motorized dishesare probably too far east or west for a 4 footer to pull in anything but the strongest transponders, if even them.
Re: A F N G16 on Mini Bud !
Yup,decisions,decisions....lol !Rowland wrote:Cool that you got it running on a 4 footer.
I have a 4 footer, but haven't gotten around to putting it up. Not sure what I want to use it for; the only satellites I don't have covered with my motorized dishesare probably too far east or west for a 4 footer to pull in anything but the strongest transponders, if even them.
Got some of the biggest Primestar Dishes wanna put up too,and 3 more 7.5 footers!
Gets boring,just watching tv,love installing,peaking,moving to diff sats,etc.
As Moley,puts it,It's The Climb....LOL !
Re: A F N G16 on Mini Bud !
Got it to work over here too! I ordered a 4 ft prime focus dish, i can't wait to test it out when it gets here!
- Attachments
-
- 69B35587-B308-45D7-8B81-667FCC21AEA8.jpeg (1.3 MiB) Viewed 5814 times
Re: A F N G16 on Mini Bud !
I'm wondering if a conical scalar would help improve signal quality on a 4ft prime focus dish?
- Attachments
-
- 1FDF6530-5344-45CB-B4ED-F4D3173ABBF0.png (184.58 KiB) Viewed 5760 times
Re: A F N G16 on Mini Bud !
Blue conical will only work in Offset dish. Prime focus will work best with flat .
Re: A F N G16 on Mini Bud !
So far this is what i got, i’ll do more testing tomorrow!
- Attachments
-
- 80086528-AD29-4062-AF3C-9707E00FF83C.jpeg (2.26 MiB) Viewed 5658 times
-
- B289A97F-B432-4302-A823-501BA7559C24.jpeg (2.48 MiB) Viewed 5658 times
Re: A F N G16 on Mini Bud !
Don't let it fall on its face.
That type of petal, pressed metal dish stretches open like a flower opening if they fall over on the LNB.
Owen
That type of petal, pressed metal dish stretches open like a flower opening if they fall over on the LNB.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: A F N G16 on Mini Bud !
There’s 40 kilos of salt holding it behind!