[GTT/GTC]Tools and User Guides
Moderators: admin, nzl229, GTMedia Team
[GTT/GTC]Tools and User Guides
【GTT/GTC】Tools and User Guides
Note: The GTT/GTC machine software is damaged and cannot be turned on.
Strict statement: This tool is only for GTT/GTC software, please do not burn other brand products
USB Burning Tool:viewtopic.php?f=51&t=6878&sid=b600c1a59 ... 922a8b38ed
GTC img Download link :viewtopic.php?f=56&t=5915&sid=b600c1a59 ... 922a8b38ed[/size]
1. Computer connection USB HUB line, install the driver
2. USB end connected to the machine
Note: The GTT/GTC machine software is damaged and cannot be turned on.
Strict statement: This tool is only for GTT/GTC software, please do not burn other brand products
USB Burning Tool:viewtopic.php?f=51&t=6878&sid=b600c1a59 ... 922a8b38ed
GTC img Download link :viewtopic.php?f=56&t=5915&sid=b600c1a59 ... 922a8b38ed[/size]
1. Computer connection USB HUB line, install the driver
2. USB end connected to the machine
FREESAT brand change GT MEDlA
Re: [GTT/GTC]Tools and User Guides
thanks, everything works fine
Re: [GTT/GTC]Tools and User Guides
Where to download ?
Re: [GTT/GTC]Tools and User Guides
Poco has leido, estan arriba en el mismo post.
-
- Posts: 5
- Joined: Thu Mar 15, 2018 5:47 pm
Re: [GTT/GTC]Tools and User Guides
i have an usb male to male cable, but when i connect it to the device the pc dont see it at all, is it required another cable or what ?
Re: [GTT/GTC]Tools and User Guides
You need install burning tool, while installing it will also install the driver for the box.samikhanfor wrote:i have an usb male to male cable, but when i connect it to the device the pc dont see it at all, is it required another cable or what ?
After doing the above your box is not showing as connected [ please make sure your box OS is corrupted or stuck in booting ], If you are box is working normal then it will not show.
Re: [GTT/GTC]Tools and User Guides
MY GTC receiver stuck with yellow light
i need firmware image file please help
i just bought receiver from one week
your links not working
i need firmware image file please help
i just bought receiver from one week
your links not working
-
- Posts: 3
- Joined: Fri Feb 08, 2019 9:10 pm
Re: [GTT/GTC]Tools and User Guides
Is it possible to renew the Image?
Re: [GTT/GTC]Tools and User Guides
I do not understand why it would be impossible. but they do not ... I really do not know what the problem is.
what I do know is that it is necessary
what I do know is that it is necessary
Re: [GTT/GTC]Tools and User Guides
thank you bro
Re: [GTT/GTC]Tools and User Guides
axwal13 wrote:thank you bro
-
- Posts: 27
- Joined: Sat Feb 16, 2019 11:55 pm
Re: [GTT/GTC]Tools and User Guides
O link da imagem está Off..?
Re: [GTT/GTC]Tools and User Guides
The problem is there are two versions of the GTC, a V2 and a V3, they use different firmwares and are not compatible. The only way 'they' can control which firmware you put on your box is to have it OTA, otherwise rhey will end up with lots of problems.Kokiwiii wrote:I do not understand why it would be impossible. but they do not ... I really do not know what the problem is.
what I do know is that it is necessary
If you hit 'menu' while booting it will enter recovery mode and re-load the last firmware that was downloaded...it will erase all of the user data.... it may help some people.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
-
- Posts: 27
- Joined: Sat Feb 16, 2019 11:55 pm
Re: [GTT/GTC]Tools and User Guides
Not a solution but a help thank you .. !!
-
- Posts: 27
- Joined: Sat Feb 16, 2019 11:55 pm
Re: [GTT/GTC]Tools and User Guides
Just one more question how to identify which is v2 and which is v3 ..?juan_vale wrote:The problem is there are two versions of the GTC, a V2 and a V3, they use different firmwares and are not compatible. The only way 'they' can control which firmware you put on your box is to have it OTA, otherwise rhey will end up with lots of problems.Kokiwiii wrote:I do not understand why it would be impossible. but they do not ... I really do not know what the problem is.
what I do know is that it is necessary
If you hit 'menu' while booting it will enter recovery mode and re-load the last firmware that was downloaded...it will erase all of the user data.... it may help some people.
Re: [GTT/GTC]Tools and User Guides
AFAIK the V3's were being shipped late 2018, I purchased my V3 on the 20th December 2018. The giveaway is in the firmware, 6.2.37 is V2 and 6.3.37 is a V3. The OTA will only give you the correct version.Falcon4072 wrote:Just one more question how to identify which is v2 and which is v3 ..?juan_vale wrote:The problem is there are two versions of the GTC, a V2 and a V3, they use different firmwares and are not compatible. The only way 'they' can control which firmware you put on your box is to have it OTA, otherwise rhey will end up with lots of problems.Kokiwiii wrote:I do not understand why it would be impossible. but they do not ... I really do not know what the problem is.
what I do know is that it is necessary
If you hit 'menu' while booting it will enter recovery mode and re-load the last firmware that was downloaded...it will erase all of the user data.... it may help some people.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: [GTT/GTC]Tools and User Guides
the menu button only works if the device "boots" but as it is, with only the green / yellow LED on, it does not work. In addition, this process only formats the entire device. do not enter in recovery mode. It is not recommended because you lose absolutely everything.
Re: [GTT/GTC]Tools and User Guides
Kokiwiii wrote:the menu button only works if the device "boots" but as it is, with only the green / yellow LED on, it does not work. In addition, this process only formats the entire device. do not enter in recovery mode. It is not recommended because you lose absolutely everything.
and if you was able to get a copy of a prvious firmware would that not also format the device. Whichever way you go you have to start from scratch....it will erase all of the user data.... it may help some people.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: [GTT/GTC]Tools and User Guides
we need updated links for the Tools plz