GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Moderators: admin, nzl229, GTMedia Team
GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
I received new update today C20.A6.2.44
there is a bug in the dtv app in dvb-c, when returning from standby/suspend it gives no signal on the channels
it is necessary to start the box again
there is a bug in the dtv app in dvb-c, when returning from standby/suspend it gives no signal on the channels
it is necessary to start the box again
-
- Posts: 97
- Joined: Mon Jul 02, 2018 4:24 pm
- Location: Costa Rica
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
ISDB-T channels has no signal event after the box is disconnected from the power, and turned on again
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
New firmware can’t save bisskey and powervu
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Yes,it is major bug,
NO SIGNAL when receiver is started ON from standby,
PLEASE,
repair NO SIGNAL bug with new OTA,
thanks!
NO SIGNAL when receiver is started ON from standby,
PLEASE,
repair NO SIGNAL bug with new OTA,
thanks!
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
i think freesat do not know the concept of beta tester
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
In dvb-T2 when turn off/on, no signal!
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
bug bug bug ...no signal after update software
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
I don't think it is general bug. My box is working good this time Oscam is faster after boot,wifi is also faster and changing channels some improvement. i even did the default rest, nothing changed. am keeping this firmware 44. thanks developersal2000 wrote:Thanks to GTMedia develovers !! They never test thier updates they just launch
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
FYI... when there is new OTA updates I never update immediately but first I check others feedback. So for the new update you can read others comments after they updated and they all have issuesso that means the new update has bugs and not stablefreesatv7 wrote:I don't think it is general bug. My box is working good this time Oscam is faster after boot,wifi is also faster and changing channels some improvement. i even did the default rest, nothing changed. am keeping this firmware 44. thanks developersal2000 wrote:Thanks to GTMedia develovers !! They never test thier updates they just launch
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Let others find out on their own. You are the people who only write on problems on this forum. The firmware is stable. I don't go by forum comments, i find out my self. Stop writing on bad only unless if you are an agent.al2000 wrote:FYI... when there is new OTA updates I never update immediately but first I check others feedback. So for the new update you can read others comments after they updated and they all have issuesso that means the new update has bugs and not stablefreesatv7 wrote:I don't think it is general bug. My box is working good this time Oscam is faster after boot,wifi is also faster and changing channels some improvement. i even did the default rest, nothing changed. am keeping this firmware 44. thanks developersal2000 wrote:Thanks to GTMedia develovers !! They never test thier updates they just launch
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Any time a new updates is released members goes immediately and start reporting problems. They don't take some real time to test and work around problems. After a day or two new solution are found ,some not. Just report those that still not working in a good manner so they can keep trying to be fix. Problem is that if you try to help or try to easy thing up members goes up against you or try to goes against GTmedia/ freesat by bashing and encourage others not to buy products. We try to be polite with those and they still around even-though!
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
we have known you, you wont succeed this time.al2000 wrote:Hello... can't you read peoples comments... they have problems with thier GTC box after the latest updatefreesatv7 wrote:Let others find out on their own. You are the people who only write on problems on this forum. The firmware is stable. I don't go by forum comments, i find out my self. Stop writing on bad only unless if you are an agent.al2000 wrote:FYI... when there is new OTA updates I never update immediately but first I check others feedback. So for the new update you can read others comments after they updated and they all have issuesso that means the new update has bugs and not stablefreesatv7 wrote:I don't think it is general bug. My box is working good this time Oscam is faster after boot,wifi is also faster and changing channels some improvement. i even did the default rest, nothing changed. am keeping this firmware 44. thanks developersal2000 wrote:Thanks to GTMedia develovers !! They never test thier updates they just launch
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
tell them, next time we shall publish a list their profile names for innocent members to notice themcpr43 wrote:Any time a new updates is released members goes immediately and start reporting problems. They don't take some real time to test and work around problems. After a day or two new solution are found ,some not. Just report those that still not working in a good manner so they can keep trying to be fix. Problem is that if you try to help or try to easy thing up members goes up against you or try to goes against GTmedia/ freesat by bashing and encourage others not to buy products. We try to be polite with those and they still around even-though!
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Do you guys test the updates? There is not a single that runs well.
every week I install lineage updates on my smartphone, and I was disgraced if I had errors like these
there is a no signal problem. it was enough to have half a dozen beta testers and so basic errors did not happen before launching a public ota
every week I install lineage updates on my smartphone, and I was disgraced if I had errors like these
there is a no signal problem. it was enough to have half a dozen beta testers and so basic errors did not happen before launching a public ota
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
After install last update i have also problem with signal.
Now i install firmware GTC_v2.0_C20.A6.2.37_20180821.zip in local update. But have big problem after start show me every time TVtest in China. And when i go to DVB install file with chanell list, after tutn off and turn on again i have TVTEST and I do not have previous channel settings saved.
Reinstallation does not give anything...
Please give me link to firmware good working in ZIP.
Now i install firmware GTC_v2.0_C20.A6.2.37_20180821.zip in local update. But have big problem after start show me every time TVtest in China. And when i go to DVB install file with chanell list, after tutn off and turn on again i have TVTEST and I do not have previous channel settings saved.
Reinstallation does not give anything...
Please give me link to firmware good working in ZIP.
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
I don't deny that there's no problem because i don't own all GTC boxes to test. My box is working very perfect. May be the developers will ask you the serial number of your boxes. They may start from there to fix the problem. Thanxtolinhas wrote:Do you guys test the updates? There is not a single that runs well.
every week I install lineage updates on my smartphone, and I was disgraced if I had errors like these
there is a no signal problem. it was enough to have half a dozen beta testers and so basic errors did not happen before launching a public ota
-
- Posts: 91
- Joined: Wed Jan 10, 2018 8:16 pm
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
mi decodificador GTC, esta trabajando excelentemente bien. No tengo ninguna queja con la nueva actualización. Desde que puedo exportar mi base de datos, no tengo problemas en actualizar. Trabajo con FTA (30W), ISDB-T (en El Salvador, 4 canales), ya se actualizo el oscam a la versión r11505, yo la recomendaría.
viewtopic.php?f=55&t=12078
-------
My GTC decoder is working excellently. I have no complaints with the new update. Since I can export my database, I have no problems updating. I work with FTA (30W), ISDB-T (in El Salvador, 4 channels), I already updated the oscam to version r11505, I would recommend it.
viewtopic.php?f=55&t=12078
viewtopic.php?f=55&t=12078
-------
My GTC decoder is working excellently. I have no complaints with the new update. Since I can export my database, I have no problems updating. I work with FTA (30W), ISDB-T (in El Salvador, 4 channels), I already updated the oscam to version r11505, I would recommend it.
viewtopic.php?f=55&t=12078
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
GTMedia engineers are fixing this bug, and the new upgrade will come this week.
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Please tell me your GTC's serial number and your email address.Ral4f wrote:After install last update i have also problem with signal.
Now i install firmware GTC_v2.0_C20.A6.2.37_20180821.zip in local update. But have big problem after start show me every time TVtest in China. And when i go to DVB install file with chanell list, after tutn off and turn on again i have TVTEST and I do not have previous channel settings saved.
Reinstallation does not give anything...
Please give me link to firmware good working in ZIP.
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Hola compañeros, acabo de adquirir una caja gtc y ando bastante perdido con el firm que no lo encuentro para poderlo poner en funcionamiento, me podéis echar una mano al respecto??
Gracias y un saludo¡¡
Gracias y un saludo¡¡
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
nzl229 wrote:Please tell me your GTC's serial number and your email address.Ral4f wrote:After install last update i have also problem with signal.
Now i install firmware GTC_v2.0_C20.A6.2.37_20180821.zip in local update. But have big problem after start show me every time TVtest in China. And when i go to DVB install file with chanell list, after tutn off and turn on again i have TVTEST and I do not have previous channel settings saved.
Reinstallation does not give anything...
Please give me link to firmware good working in ZIP.
Serial number GC2A18006249
Email: rzalejski@wp.pl
-
- Posts: 14
- Joined: Fri Dec 28, 2018 11:34 pm
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
after installation last update i have bug like users with DVB-C, ISDB-T, and ATSC-C with DVBS/S2 signals after suspend. No signal and i have to restart GTC every time when i would like to watch TV
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Ya puestos a resolver problemas, podrían hacer algo para que encada búsqueda de canales, no desordenara los ya existentes.
Muchas gracias.
Already set to solve problems, they could do something to search for channels, not mess up existing ones.
Thank you.
Muchas gracias.
Already set to solve problems, they could do something to search for channels, not mess up existing ones.
Thank you.
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
Statement, please don't mess with the softwareRal4f wrote:nzl229 wrote:Please tell me your GTC's serial number and your email address.Ral4f wrote:After install last update i have also problem with signal.
Now i install firmware GTC_v2.0_C20.A6.2.37_20180821.zip in local update. But have big problem after start show me every time TVtest in China. And when i go to DVB install file with chanell list, after tutn off and turn on again i have TVTEST and I do not have previous channel settings saved.
Reinstallation does not give anything...
Please give me link to firmware good working in ZIP.
Serial number GC2A18006249
Email: rzalejski@wp.pl
GTC
1) SN starts with "GTC" and the version is 6.2.XX
2) SN starts with "GC" and the version is 6.3.XX
1.Instructions:
gt series usb forced upgrade guide(2019.2.26).zip
download/file.php?id=3913&sid=0a692c8e4 ... 75bba801d5
2.Firmware download link:Send your email
FREESAT brand change GT MEDlA
Re: GTC FIRMWARE C20.A6.2.44 22/3/2019 - bugs
SN: GC2A18005806
Email : asia.baryczko@wp.pl
Email : asia.baryczko@wp.pl