131w

[bubbs16]

3808 V
DVB-S2
8PSK
15800-5/6


I don't know what has happened. Used to get these ch just fine for well over a year now nothing. I don't know if they switched sometbing up the FEC or waht the deal is. Can you guys pm me what signal and quality you are getting.

[iq180]

3808 V
DVB-S2
8PSK
15800-5/6


I don't know what has happened. Used to get these ch just fine for well over a year now nothing. I don't know if they switched sometbing up the FEC or waht the deal is. Can you guys pm me what signal and quality you are getting.

I had to move my dish 3 points west on my V-box today to get my S&Q back up on about half the TPs on 131.0w, you mite want to try that.

[bubbs16]

Movef the dish all over the place still won't come on. Everytbing else is fine. It's literally just this tp like. It's a glitch or something idk.

Can you tell me. Your quality on 3808 v

[machteck]

3808 V
DVB-S2
8PSK
15800-5/6


I don't know what has happened. Used to get these ch just fine for well over a year now nothing. I don't know if they switched sometbing up the FEC or waht the deal is. Can you guys pm me what signal and quality you are getting.

Had to enter the tp it did come in, signal is unstable, 91 signal 66 down to 0 quality, best signal i can get. that is with bumping the dish, 8ft fiberglass. Hallmark channels

[bubbs16]

That's what's going on her3 as well. 7. 5 mesh. It's so weird They used to always work flawless. Wonder what has changed

[machteck]

3808 V
DVB-S2
8PSK
15800-5/6


I don't know what has happened. Used to get these ch just fine for well over a year now nothing. I don't know if they switched sometbing up the FEC or waht the deal is. Can you guys pm me what signal and quality you are getting.

Had to enter the tp it did come in, signal is unstable, 91 signal 66 down to 0 quality, best signal i can get. that is with bumping the dish, 8ft fiberglass. Hallmark channels

Finally got it stable . my actuator is 12 v off a wheel chair lift on the 8 ft dish, 12v battery mounted under the dish with 2 relays for east n west , 150 foot of control cable to house with a 2 position spring loaded to center toggle switch. Poor people have poor ways.

[machteck]

That's what's going on her3 as well. 7. 5 mesh. It's so weird They used to always work flawless. Wonder what has changed

Could your elevation gotten off a bit? transponder may be getting a little weak.

[bubbs16]

What quality you pulling?

[machteck]

What quality you pulling?

(1 sig, 91 quality 69

[bubbs16]

Oh barely then with a 8ft....

[machteck]

Oh barely then with a 8ft....

Yes i don't have 131 W scanned in yet on the 10 ft, had to reinstall sats, and re scan channels haven't got to 131 yet.

[Marsat]

3808 V
DVB-S2
8PSK
15800-5/6


I don't know what has happened. Used to get these ch just fine for well over a year now nothing. I don't know if they switched sometbing up the FEC or waht the deal is. Can you guys pm me what signal and quality you are getting.

This is VERY low power TP. you need to be at midwest or west coast to have a decent signal with 8 footer up. On East coast you need to have a 10/12 footer or for 8 footer expect fading

[bubbs16]

:coming in this am as usual, but will only last a few hours then dissappears

[iq180]

:coming in this am as usual, but will only last a few hours then dissappears

Your problem is the sun and the time of the year, you will get this on a 7.5 dish, the 10 and 12 footers don't seem to have this problem with the sun.
You can make it better with some good flat black paint, or what I used was black truck spray bed liner, you can find it at Napa auto parts.

[bubbs16]

paint the entire reflector black? is that what your sayig?

[iq180]

paint the entire reflector black? is that what your sayig?

Paint it flat black or flat gray, if it has any shine it will reflect sun light into the LNB and kill Q.