Freesat V7 Firmware 2018.11.19

[Nettomo]

Freesat V7 Firmware 2018.11.19

Hallo,
leider stürzt auch diese Firmware ewig ab.
"CCcam"
Besonders schlimm ist es von zb. Astra - "Vivid" und "Hustler TV",
schalte ich von "tagesschau24" auf "Brazzers TV" ist sofot Ende.

Getestet auf 2 Freesat V7 HD Geräten.

--------------------

Freesat V7 Firmware 2018.11.19

Hello,
unfortunately, this firmware crashes forever.
"CCcam"
It is particularly bad of zb. Astra - "Vivid" and "Hustler TV",
I switch from "tagesschau24" to "Brazzers TV" is over immediately.

Tested on 2 Freesat V7 HD devices.

greeting Uwe

[Nettomo]

Hi xuromi,
das stimmt nicht,
die Firmware vom 2018.08.03 läuft mit CCcam besser.

----------------------

Hi xuromi,
that's not true,
the firmware from 2018.08.03 runs better with CCcam.

greeting Uwe

[Nettomo]

Ich schrieb es bereits hier:
viewtopic.php?f=32&t=10435

-------------------------------------

I already wrote it here:
viewtopic.php?f=32&t=10435

[Nettomo]

So habe nun das FREESAT_V7_HD_20180803 wieder installiert,
mit CCcam läuft alles stabiel.

-------------------------------

So have now reinstalled the FREESAT_V7_HD_20180803,
everything is stable with CCcam.

[Nettomo]

Hi xuromi,
ich kann natürlich nur von Deutschen Servern reden

------------------

Hi xuromi,
Of course I can only speak about German servers

[gigano]

Hallo,
leider stürzt auch diese Firmware ewig ab. habe der alte software von 3.8.2018 geladen und habe keine problem mehr.

[Feralkiwi]

Do not call me a liar. I've tried all the firms since May of this year. The result, same problem in those channels. That is, in my case, I have seen that problem in all the firms. If you do well, it will be the clines that you use, it is not a problem of the firm.

A lot of the Ccam problems are from the ISP Modem box blocking your Ccam access to the net.
Other users using other ISP's will get different results than you do.

See this discussion re IPTV blocking by ISP JAZZTEL.

Owen

[Nettomo]

Hallo,
ich muß "mikelsat" zustimmen:
Es ist bei mir immer die selbe FritzBox,
die selbe CCcam-Line und die selben Freesat V7 Geräte.

"Jedoch habe ich immer die Aktuelle Firmware aufgespielt."

Die Freesat Geräte habe ich für Freunde je nach bedarf eingerichtet,
jedoch kann ich einmal die Geräte Freesat V8 Super,Golden ausprobieren.

------------------------------------------

Hello,
I have to agree with "mikelsat":
It is always the same FritzBox with me,
the same CCcam-Line and the same Freesat V7 devices.

"However, I have always uploaded the latest firmware."

The freesat devices I have set up for friends as needed,
However, I can try the devices Freesat V8 Super, Golden.

greeting Uwe

[Nettomo]

Update:
Ich habe nun V8 Super, Golden(Sat) getestet,
beide Geräte stürzen(reboot) genauso ab wie der Freesat V7 HD.

Dieses zb. passiert wenn CCcam zwischen den verschiedenen verschlüsselungen umschaltet.

Mit der Firmware vom 03.08.2018 läuft CCcam.

----------------- Google translation -----------------

I have now tested V8 Super, Golden(Sat),
Both devices crash (reboot) as well as the Freesat V7 HD.

This zb. happens when CCcam switches between the different encryptions.

With the firmware from 03.08.2018 runs CCcam.


greeting Uwe

[tasimans]

Please repair YouTube search!!! Don,t work long ago!

[gigano]

Wie bei mir, V8 Super, V8 Golde, V7 Combo, V7 HD, V7S alle stürtzen ab.

[Nettomo]

Hi gigano,
für die Geräte Freesat V7 HD V8 Super/Golden,
rate ich di zu der Firmware vom 03.08.2018.

Die läuft mit CCcam an stabilsten.

Gruß Uwe

PS: PM

[thom lungu]

mr owen how to add biss keys to freesat v7s please

[Juan]

Freesat V7 Firmware 2018.11.19

Hallo,
leider stürzt auch diese Firmware ewig ab.
"CCcam"
Besonders schlimm ist es von zb. Astra - "Vivid" und "Hustler TV",
schalte ich von "tagesschau24" auf "Brazzers TV" ist sofot Ende.

Getestet auf 2 Freesat V7 HD Geräten.

--------------------

Freesat V7 Firmware 2018.11.19

Hello,
unfortunately, this firmware crashes forever.
"CCcam"
It is particularly bad of zb. Astra - "Vivid" and "Hustler TV",
I switch from "tagesschau24" to "Brazzers TV" is over immediately.

Tested on 2 Freesat V7 HD devices.

greeting Uwe

[STRETCH]

Go to MENU / NETWORK press OK, Type 6666 / then go to KEY EDIT press OK.
Then action the keys to the section that you require

Den

[spok2010]

This version changed nothing. 65 W and 75 W continues off and 34.5 W (MTN) too. At last, what changed?

[Nettomo]

Es ist doch Fakt,
das im Moment viele Freesat Geräte die selben Probleme haben.

Gruß Uwe

----------------- Google translation -----------------

It's a fact
that at the moment many Freesat devices have the same problems.

greetings Uwe

[Rogivan]

This version changed nothing. 65 W and 75 W continues off and 34.5 W (MTN) too. At last, what changed?

a bobosat já implantou o has mode 25 enquanto na atualização foi colocado o 21 e 22 tá muito atras

[rafael_aroldo]

lo que he notado en esta versión es que donde antes ponia señal y calidad ahora pone: S y Q.
Eso por qué es?

Falha de tradução. Em espanhol: Calidad; em inglês: Quality; em português: Qualidade. Q

No freesatV7HD não ocorreu essa falha.

[rafael_aroldo]

Jaja. Eso ya lo se compañero. Antes salía palabra completa.
No se por qué tocan lo que ya está bien. Y lo que sigue mal no lo arreglan.
Aunque esto para mi es una chorrada siempre que no afecte al rendimiento.

Hahaha. Faltou em portunhol. Não sei qual seria...

[Rajabuhamisi]

Gt media pleas help as on 68.5 Ten spots to open on freesat V7 hd

[STRETCH]

TEN SPORTS, on this satellite are in Encryption (IRDETO 2 / CONAX ) which is NOT supported.

Den

[Nettomo]

Hallo Owen,
wird denn in der nächsten Firmware das "CCcam" Problem behoben sein ?

Gruß Uwe

----------------- Google translation -----------------

Hello Owen,
will be fixed in the next firmware, the "CCcam" problem?

greetings Uwe

[Feralkiwi]

Hallo Owen,
wird denn in der nächsten Firmware das "CCcam" Problem behoben sein ?

Gruß Uwe

----------------- Google translation -----------------

Hello Owen,
will be fixed in the next firmware, the "CCcam" problem?

greetings Uwe

I do not know. I am a user of Freesat like you.
I see these new softwares on the site as you do.

One question: Is the Ccam service for 12515, that blocks, a PayTV providers service or a hack?

Owen

[Nettomo]

Hallo Owen,
das wußte ich nicht, der Avatar lässt andees vermuten.

Ich verstehe die Frage nicht.

-> Post 1

Gruß Uwe

----------------- Google translation -----------------

Hello Owen,
I did not know that, the avatar suggests otherwise.

I do not understand the question.

--> Post 1

greetings Uwe