GTMEDIA_V8 Series Bug Tracking System
Moderators: admin, GTMedia Team
Re: GTMEDIA_V8 Series Bug Tracking System
Do you have the BISS key in the normal BISS list three times, one for each channel TP info?
If you are using the CMD BISS list, that the unit puts the auto roll code, that may be the issue.
I have not tested this with the V8X, but the UHD does not use working CMD BISS codes that it has, unless it has the internet connected to re roll the code, so any fixed BISS channel code I roll, I load into the normal BISS list.
Owen
If you are using the CMD BISS list, that the unit puts the auto roll code, that may be the issue.
I have not tested this with the V8X, but the UHD does not use working CMD BISS codes that it has, unless it has the internet connected to re roll the code, so any fixed BISS channel code I roll, I load into the normal BISS list.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA_V8 Series Bug Tracking System
F A11FEED5 01 XXXXXXXXXXXXXXXX;Feralkiwi wrote: ↑Tue Aug 18, 2020 9:53 pmDo you have the BISS key in the normal BISS list three times, one for each channel TP info?
If you are using the CMD BISS list, that the unit puts the auto roll code, that may be the issue.
I have not tested this with the V8X, but the UHD does not use working CMD BISS codes that it has, unless it has the internet connected to re roll the code, so any fixed BISS channel code I roll, I load into the normal BISS list.
Owen
F A11FEED5 00 XXXXXXXXXXXXXXXX;
You can try this format, if you don't know the TP information.
Re: GTMEDIA_V8 Series Bug Tracking System
Yes, it' s so.
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GTMEDIA_V8 Series Bug Tracking System
That's right. Are you using cccam?
I have confirmed this bug, and fixed it.
Please wait the next firmware.
Re: GTMEDIA_V8 Series Bug Tracking System
@alex.c
Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.
Thanks.
These channels don't interest me, but it bothers me that the receiver freezes.
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GTMEDIA_V8 Series Bug Tracking System
Right, I just checked.
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GTMEDIA_V8 Series Bug Tracking System
-
- Posts: 221
- Joined: Tue Jan 07, 2020 1:45 am
- Location: Egipto
Re: GTMEDIA_V8 Series Bug Tracking System
El decodificador satelital gt media V8 uhd se queda congelada la imagen y el receptor no responde a nada, se queda parado, he actualizado a la última versión (207) pero se queda así, no hace nada, además hay problemas con las flores, algunas las coge bien y otras pone mensajes como name incorrecto o algo por el estilo, es agobiante
Saludos.
-
- Posts: 221
- Joined: Tue Jan 07, 2020 1:45 am
- Location: Egipto
Re: GTMEDIA_V8 Series Bug Tracking System
I am having an issue with my V8UHD that I just got with the autoroll on 116.8, 4017 H 23200, it loads three of the channels, but does not load the 4th, it doesn't pick it up encryption type just ? in the info bar. Also have an issue on 3968 V 7500, shows as FTA, but when it does load it loads audio and displays "scrambled" message and does not roll.
Re: GTMEDIA_V8 Series Bug Tracking System
The channels are BISS encrypted, but V8X shows FTA on infor bar, right?theyguy wrote: ↑Thu Aug 20, 2020 3:35 amI am having an issue with my V8UHD that I just got with the autoroll on 116.8, 4017 H 23200, it loads three of the channels, but does not load the 4th, it doesn't pick it up encryption type just ? in the info bar. Also have an issue on 3968 V 7500, shows as FTA, but when it does load it loads audio and displays "scrambled" message and does not roll.
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.
Re: GTMEDIA_V8 Series Bug Tracking System
Hi admin I have v8 pro 2 receiver and I update the latest firmware (11-8-2020) but biss key can’t auto roll and it stop auto- biss calculating please wait. it never rolls biss key. Another error is adding cccam. When I on index one another index
auto on too. When I off an index another indexs off too. This bug is so disappointed for an user. Next update please fix this errors. Thanks admin team
auto on too. When I off an index another indexs off too. This bug is so disappointed for an user. Next update please fix this errors. Thanks admin team
Re: GTMEDIA_V8 Series Bug Tracking System
You can send me your cccam accounts, then I can check what's wrong.zawaung wrote: ↑Thu Aug 20, 2020 2:24 pmHi admin I have v8 pro 2 receiver and I update the latest firmware (11-8-2020) but biss key can’t auto roll and it stop auto- biss calculating please wait. it never rolls biss key. Another error is adding cccam. When I on index one another index
auto on too. When I off an index another indexs off too. This bug is so disappointed for an user. Next update please fix this errors. Thanks admin team
About the autobiss, please tell the channel informations, which sat, which TP, which channel?
Thank you.
Re: GTMEDIA_V8 Series Bug Tracking System
Biss keys roll correctly now but some channel on thaicom 6, tp 12604 v 3000 livesky 1,2,3,4 can’t roll correctly. Thanks for your kindness.
- Attachments
-
- I on only index 1 and 5 but other index’s ecm are ready.
- 8DAD3558-44F1-44D4-A61F-39AD1EF98B4B.jpeg (4.58 MiB) Viewed 27746 times
Re: GTMEDIA_V8 Series Bug Tracking System
This is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.alex.c wrote: ↑Thu Aug 20, 2020 5:13 amThe channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.
The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?
Re: GTMEDIA_V8 Series Bug Tracking System
Hi, friend.theyguy wrote: ↑Fri Aug 21, 2020 2:08 amThis is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.alex.c wrote: ↑Thu Aug 20, 2020 5:13 amThe channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.
The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?
I sent you a PM. Please check it.
Re: GTMEDIA_V8 Series Bug Tracking System
I received your channel.theyguy wrote: ↑Fri Aug 21, 2020 2:08 amThis is on a V8UHD - The 1 channel in 116.8 4017H23200 is BISS but shows "?" in the info bar. The rest of the channels (other than 2 feeds which do the same thing) show as BISS/FTA and roll perfectly.alex.c wrote: ↑Thu Aug 20, 2020 5:13 amThe channels are BISS encrypted, but V8X shows FTA on infor bar, right?
Please record the TS file for us. check this guard to record TS.
download/file.php?id=6057
Thank you.
The other 116.8 3968V7500 shows as FTA but is BISS (at least that is what lyngsat says) and does not roll. It also showed as FTA on my v7 Plus. I have a TS file for that one, how would you like it sent?
Just like what I thought, these channels are scrambled, but it is not described in PMT.
So we don't know it is BISS channels.
That's why it doesn't work.
Re: GTMEDIA_V8 Series Bug Tracking System
OK, Thanks. Seemed strange that it comes up as FTA when it is scrambled.
Re: GTMEDIA_V8 Series Bug Tracking System
Why are 5 numbers? The maximum value of PID does not exceed 8191przeeemek1 wrote: ↑Sun Aug 16, 2020 7:07 pm1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.
2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?
FREESAT brand change GT MEDlA
-
- Posts: 8
- Joined: Mon Jul 06, 2020 9:15 pm
Re: GTMEDIA_V8 Series Bug Tracking System
Mismo problema. Aún no se corrige con la nueva actualización (v8x)
Re: GTMEDIA_V8 Series Bug Tracking System
Yes please, try to find more storage, That's really big problem.
I can find same problem on the stored keys. No more than 999 for powervu keys
Thank you for your work
Ku>DH 4,25M+OMT ADLx2LNB SMW
Ku>125 28E+2x100 13/19E+120x5W
C>DH 4,25M+2 AVCOMM OMT HV/LR+4LNB PLL ±5kHz
Mot.HH POLAR+Pos.RC2000C AZ/EL+RotorFeed
TBS5925x13E/19E/28E/5W-TBS6983xC/HV- TBS6908xC L/R+KU H/V
DVR7000 D2500IP LT8700-MVHD300C-MM9600
Ku>125 28E+2x100 13/19E+120x5W
C>DH 4,25M+2 AVCOMM OMT HV/LR+4LNB PLL ±5kHz
Mot.HH POLAR+Pos.RC2000C AZ/EL+RotorFeed
TBS5925x13E/19E/28E/5W-TBS6983xC/HV- TBS6908xC L/R+KU H/V
DVR7000 D2500IP LT8700-MVHD300C-MM9600
-
- Posts: 43
- Joined: Wed Jan 09, 2019 9:08 pm
Re: GTMEDIA_V8 Series Bug Tracking System
if I want to search for a single program, I have to provide the parameter marked in the picture. it's called SID, but I can see that this parameter needs to be passed in place of PCR PID. otherwise I can't search for anything. unless I am doing something wrong or there is some translation error.Lining wrote: ↑Fri Aug 21, 2020 3:23 amWhy are 5 numbers? The maximum value of PID does not exceed 8191przeeemek1 wrote: ↑Sun Aug 16, 2020 7:07 pm1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.
2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?
- Attachments
-
- IMG_20200823_092323.jpg (2.96 MiB) Viewed 28411 times
Last edited by przeeemek1 on Sun Aug 23, 2020 7:24 am, edited 1 time in total.
Re: Problema con XTREAM en GTMEDIA V8 HONOR
¿No hay ninguna respuesta, ningún moderador tiene al menos una sugerencia?daabir wrote: ↑Sat Aug 08, 2020 9:28 amHola a todos.
He comprado una lista IPTV m3u para ponerla en el XTREAM de mi V8 HONOR pero no he conseguido que funcione. Carga la lista de canales pero no abre ninguno. Otras veces al cargar la lista aparece mensaje de error. La lista funciona porque la he probado en mi celular. Lo he intentado con otras listas de prueba de 24 horas y tampoco han funcionado.
Esta es la configuración de mi fichero "xtream.tex":
url = http://xxxxx.xxx (también lo he probado quitando "http://")
port = xxxxx (el que me indica el proveedor, normalmente 8880. Tambien he probado poniendo 0)
user = xxxxxxxxx
password = xxxxxxxxx
Agradecería un poco de ayuda. Gracias.
Saludos.